Polyaniline (PANI) is a conducting polymer, widely used in gas-sensing applications. Due to its classification as a semiconductor, PANI is also used to detect reducing ammonia gas (NH₃), which is a well-known and studied topic. However, easier, cheaper and more straightforward procedures for sensor fabrication are still the subject of much research. In the presented work, we describe a novel, more controllable, synthesis approach to creating NH₃ PANI-based receptor elements. The PANI was electrochemically deposited via cyclic voltammetry (CV) on screen-printed electrodes (SPEs). The morphology, composition and surface of the deposited PANI layer on the Au electrode were characterised with electron microscopy, Fourier-transform infrared spectroscopy and profilometry. Prior to the gas-chamber measurement, the SPE was suitably modified by Au sputtering the individual connections between the three-electrode system, thus showing a feasible way of converting a conventional three-electrode electrochemical SPE system into a two-electrode NH₃-gas detecting system. The feasibility of the gas measurements’ characterisation was improved using the gas analyser. The gas-sensing ability of the PANI-Au-SPE was studied in the range 32–1100 ppb of NH₃, and the sensor performed well in terms of repeatability, reproducibility and sensitivity.

In this work, we report on the integration of individual BaTiO(3) nanorods into simple circuit architectures. Polycrystalline BaTiO(3) nanorods were synthesized by electrophoretic deposition (EPD) of barium titanate sol into aluminium oxide (AAO) templates and subsequent annealing. Transmission electron microscopy (TEM) observations revealed the presence of slabs of hexagonal polymorphs intergrown within cubic grains, resulting from the local reducing atmosphere during the thermal treatment. Electrical measurements performed on individual BaTiO(3) nanorods revealed resistivity values between 10 and 100 Ω cm, which is in good agreement with typical values reported in the past for oxygen-deficient barium titanate films. Consequently the presence of oxygen vacancies in their structure was indirectly validated. Some of these nanorods were tested as proof-of-concept humidity sensors. They showed reproducible responses towards different moisture concentrations, demonstrating that individual BaTiO(3) nanorods may be integrated in complex circuit architectures with functional capacities.

We report on an unusual crystallization phenomenon that results in the self-assembly of sub-micron tubules of crystalline SrTiO3. The deposition of the tubular structures was done in the pores of anodized aluminum oxide templates by the electrophoretic deposition of SrTiO3 sols and subsequent annealing. Homogeneous nucleation inside the pores produces a critical number of crystallites leading to their self-organization when the nanocrystals reach sizes that equal the mean free distances between the nuclei. Due to steric constraints the crystals start to organize in order to most efficiently fill the available surface of the pore walls. This process leads to the formation of domains containing a large number of idiomorphic SrTiO3 nano-cubes that are self-aligned into almost perfect cube-on-cube and cube-to-wall registry, which makes up the walls of the tubules. The described mechanism shows the ability of nanocrystals with well defined morphologies to adapt spatial constraints and self-organize into desired geometries.

Our contribution focuses on humidity gas-sensing device formation of metal oxide materials such as BaTiO₃ nanorods and TiO₂-BaTiO₃ nanotubes. Processing of humidity sensors based on BaTiO₃ nanostructured materials, that can operate under severe environmental conditions is of great relevance due to their small size and small weight. As a result, these sensors possess high stability, fast response times and reproducibility. Furthermore, gas sensor properties are not only interesting in terms of device applications, but also pave the way to study in deep ionic and electronic conduction mechanisms in individual nano-based devices.

Simple, low-cost methods for sensing volatile organic compounds that leave no trace and do not have a detrimental effect on the environment are able to protect communities from the impacts of contaminants in water supplies. This paper reports the development of a portable, autonomous, Internet of Things (IoT) electrochemical sensor for detecting formaldehyde in tap water. The sensor is assembled from electronics, i.e., a custom-designed sensor platform and developed HCHO detection system based on Ni(OH)₂–Ni nanowires (NWs) and synthetic-paper-based, screen-printed electrodes (pSPEs). The sensor platform, consisting of the IoT technology, a Wi-Fi communication system, and a miniaturized potentiostat can be easily connected to the Ni(OH)₂–Ni NWs and pSPEs via a three-terminal electrode. The custom-made sensor, which has a detection capability of 0.8 µM/24 ppb, was tested for an amperometric determination of the HCHO in deionized (DI) and tap-water-based alkaline electrolytes. This promising concept of an electrochemical IoT sensor that is easy to operate, rapid, and affordable (it is considerably cheaper than any lab-grade potentiostat) could lead to the straightforward detection of HCHO in tap water.