Today it is obvious that the existing linear model of the economy does not correlate with the principles of sustainable development. The circular economy model can replace the current linear economy whilst addressing the issues of environmental deterioration, social equity and long-term economic growth. In the context of effectively implementing circular economy objectives, particular importance should be attributed to wastewater treatment sludge management, due to the possibility of recovering valuable raw materials and using its energy potential. Anaerobic digestion is one of the methods of recovering energy from sewage sludge. The main goal of this study is to make a preliminary evaluation of possible sewage sludge biogas and biomethane solutions using a computation model called MCBioCH₄ and compare its results with laboratory tests of sewage sludge fermentation from the northern wastewater treatment plant (WWTP) of Ekaterinburg (Russian Federation). Laboratory experiments were conducted to determine the volume and qualitative composition of biogas produced throughout anaerobic fermentation of raw materials coming from the WWTP. The specific productivity of samples ranged between 308.46 Nm³/t_vs and 583.08 Nm³/t_vs depending if mesophilic or thermophilic conditions were analyzed, or if the experiment was conducted with or without sludge pre-treatment. Output values from the laboratory were used as input for MCBioCH₄ to calculate the flow of biogas or biomethane produced. For the case study of Ekaterinburg two possible energy conversion options were selected: B-H (biogas combustion with cogeneration of electrical and thermal energy) and M-T (biomethane to be used in transports). The results of the energy module showed a net energy content of the biogas between 6575 MWh/year and 7200 MWh/year. Both options yielded a favorable greenhouse gas (GHG) balance, meaning that avoided emissions are higher than produced emissions. The results discussion also showed that, in this case, the B-H option is preferable to the M-T option. The implementation of the biogas/biomethane energy conversion system in Ekaterinburg WWTP necessitates further investigations to clarify the remaining technical and economic aspects

Crumb rubber (CR) derived from grinding of end-of-life tyres (ELTs) may be successfully used as a bitumen modifier or as a supplementary component in the production of bituminous mixtures employed for the construction and maintenance of road pavements. However, CRs deriving from different sources and production processes yield effects on performance of corresponding paving mixtures under traffic loading and on gaseous emissions produced during laying on site which may change considerably depending upon their physical and chemical properties. In order to quantitatively assess the possible variability of CR characteristics, 16 samples were taken from 9 Italian and 2 foreign ELT processing plants. Investigation activities included field surveys, during which plants were examined in detail, and laboratory tests, which focused on physical and chemical characterization of CR. Based on the analysis of available technical information and experimental data, it was possible to find relationships between the peculiar characteristics of treatment cycles and corresponding CR properties.