Marcin Daniel Gajewski

Prof. Dr. Marcin Daniel Gajewski

1. Civil Engineering Department, Warsaw University of Technology, Armii Ludowej 16 Street, 00-637 Warsaw, Poland
+1
orcid

Research Focus & Metrics

Academic Career Length

36Years (1991-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2015 in Procedia Engineering
Verified
Journal Article
Open access
Marcin Daniel GajewskiMarcin Daniel Gajewski
Marcin Daniel Gajewski
RSRadosław Szczerba
Radosław Szczerba
SJStanisław Jemioło
Stanisław Jemioło
The application of the hyperelasticity constitutive relationships for modelling of elastomeric bridge bearings is presented. Elastomers which are used for bridge bearings are nearly incompressible materials. Consequently, two models of hyperelasticity for rubber-like materials, i.e. neo-Hookean and Yeoh models are considered. The neo-Hookean model is the simplest possible model of hyperelasticity but unfortunately it has a number of disadvantages (i.e. at certain deformation modes it gives physically unreasonable predictions). The Yeoh model for nonlinear elastic materials is superior to neo-Hookean model and leads to rational description of the behavior of the elastomers for significant elongations and is implemented in many commercial programs using finite element method (FEM). In this work, ABAQUS program is utilized for modelling of chosen bridge bearings. The parameters of two constitutive models are determined based on experimental results and are used in numerical calculations for selected examples of bridge bearings. Concluding remarks are drawn and directions of future research are outlined

1 January 2014 in Procedia Engineering
Verified
Journal Article
Open access
Marcin Daniel GajewskiMarcin Daniel Gajewski
Marcin Daniel Gajewski
PLPierre-Alain Langlois
Pierre-Alain Langlois
The top-down cracking of asphalt concrete pavements caused by thermal factors are very common in Poland. Cracking can occur as a result of a single intensive event (severe temperature drop) or as a result of cyclic long-term less severe events (thermal fatigue). In both cases precise constitutive modeling of materials is a key issue for rational prediction of the pavement behavior. As a starting point the Thermal Stress Restrained Specimen Test (TSRST) in which the shrinkage proceeds due to temperature reduction is analyzed and compared with experiment results for chosen mix. The TSRST is modeled using the finite element method in a frame of thermo-mechanics with the so-called weak coupling between thermal and mechanical effects. Mechanical properties are taken into account by the constitutive relations of elasticity, visco-elasticity and continuum cracking models. Among the continuum cracking models special place is devoted to cohesive zone model which is a new development in fracture mechanics. Cohesive zone model in many works is presented as the only solution for rational modeling of TSRST and this notion is also addressed herein

6 September 2021 in Materials
Verified
Journal Article
Open access
PDF file
DDDuyen Duc
Duyen Duc
APAndrzej Michał Piotrowski
Andrzej Michał Piotrowski
CACezary Ajdukiewicz
Cezary Ajdukiewicz
PWPiotr Paweł Woyciechowski
Piotr Paweł Woyciechowski
Marcin Daniel GajewskiMarcin Daniel Gajewski
Marcin Daniel Gajewski
Concretes with dispersed reinforcement are increasingly used in structural engineering. The basic source of knowledge on their application and design are the Model-Code 2010 guidelines. These guidelines, however, apply mainly to steel rebar reinforcement and are not fully sufficient in the analysis of the load-bearing capacity of elements made of concrete with dispersed reinforcement. Therefore, scientific research in this field is carried out continuously. The main goal of our work is to provide experimental data for the calibration of constitutive models of the cracking mechanics of concrete with reinforcement in the form of steel and polypropylene fibers. This article shows the possibility of using the digital image correlation system (DIC) to achieve this goal. The method of sample preparation and the method of conducting the tests were modeled on the recommendations contained in the PN-EN 14651: 2007 standard. The tests were carried out on prismatic elements with a notch loaded in a three-point bending setup. The results of standard strength tests are presented in the form of column graphs and tables. As an extension, the results of calculations of energy dissipated in fracture process are given. Moreover, the experimentally obtained graphs of the relationship between the force, displacement and crack opening were presented, which were supplemented with the images of crack development obtained with the use of DIC. The development of the crack net is characterized not only qualitatively but also quantitatively as a function of deflection or crack mouth opening displacement. Conclusions concerning the adopted research methodology and the tested materials are presented at the end of the article.

1 January 2015 in Procedia Engineering
Verified
Journal Article
Open access
ŁKŁukasz Kowalewski
Łukasz Kowalewski
Marcin Daniel GajewskiMarcin Daniel Gajewski
Marcin Daniel Gajewski
The heterogeneous FEM models of brick walls are analyzed in order to estimate possibility to predict proper failure mechanisms for different biaxial stress modes. The micro-modeling of masonry structures with the application of cohesive elements to describe the mortar joint zone is applied. For the boundary value problems modeling different brick patterns the typical biaxial tests are simulated. In one case (the most typical pattern) the comparison of numerical test solutions with laboratory experiment results on masonry panels in biaxial stress states made by Page is done. The qualitative comparison between numerical and real-life experiments shows the possibilities of application of Abaqus FEA build-in constitutive material models in evaluating the behavior of masonry under biaxial stresses. Such models properly verified can be treated as virtual experimental tests for determination of parameters for macroscopic continuum elasto-plastic models

4 September 2012
Verified
Book Chapter
Closed access
PDF file
DSDariusz Sybilski
Dariusz Sybilski
HSHilde Soenen
Hilde Soenen
Marcin Daniel GajewskiMarcin Daniel Gajewski
Marcin Daniel Gajewski
ECEmannuel Chailleux
Emannuel Chailleux
WBWojciech Bankowski
Wojciech Bankowski

1 February 2017 in Archives of Civil and Mechanical Engineering
Verified
Journal Article
Closed access
MGMarian Antoni Giżejowski
Marian Antoni Giżejowski
RSRadosław Szczerba
Radosław Szczerba
Marcin Daniel GajewskiMarcin Daniel Gajewski
Marcin Daniel Gajewski
ZSZbigniew Stachura
Zbigniew Stachura