In recent years, pharmaceutical products have been causing a serious environmental problem in hospital wastewater and water purification plants. The elimination of these pollutants is difficult due to their resistance to biological degradation. Paracetamol has been detected in higher concentrations in hospital wastewater than in other buildings. Activated carbons are a good material for removing paracetamol from hospital wastewater. One of the starting materials to obtain activated carbons is kenaf, which is an easy plant to cultivate. To study the elimination of paracetamol from hospital wastewater by activated carbon, the textural and chemical characterization of activated carbon, as well as the kinetic study and the analysis of the paracetamol adsorption mechanism by the adsorbent, have been carried out. The activated carbon samples studied are micro-mesoporous, with high specific surface values. The chemical composition with presence of oxygen groups favours the adsorption process. The adsorption kinetics were adjusted to a pseudo-second order model. The adsorption mechanism followed the intraparticular diffusion model, carried out in two stages: a fast first stage on the surface of the adsorbent and a slow one inside the pore. Based on the kinetic study, the use of this type of carbon is a good application for the removal of paracetamol from hospital wastewater.

3D bioprinting has emerged as a key tool in tissue engineering by facilitating the creation of customized scaffolds with properties tailored to specific needs. Among the design parameters, porosity stands out as a determining factor, as it directly influences critical mechanical and biological properties such as nutrient diffusion, cell adhesion and structural integrity. This review comprehensively analyses the state of the art in scaffold design, emphasizing how porosity-related parameters such as pore size, geometry, distribution and interconnectivity affect cellular behavior and mechanical performance. It also addresses advances in manufacturing methods, such as additive manufacturing and computer-aided design (CAD), which allow the development of scaffolds with hierarchical structures and controlled porosity. In addition, the use of computational modelling, in particular finite element analysis (FEA), as an essential predictive tool to optimize the design of scaffolds under physiological conditions is highlighted. This narrative review analyzed 112 core articles retrieved primarily from Scopus (2014–2025) to provide a comprehensive and up-to-date synthesis. Despite recent progress, significant challenges persist, including the lack of standardized methodologies for characterizing and comparing porosity parameters across different studies. This review identifies these gaps and suggests future research directions, such as the development of unified characterization and classification systems and the enhancement of nanoscale resolution in bioprinting technologies. By integrating structural design with biological functionality, this review underscores the transformative potential of porosity research applied to 3D bioprinting, positioning it as a key strategy to meet current clinical needs in tissue engineering.

Carbonaceous materials analyzed in this investigation were six nanometric particle size carbon blacks. Carbons were texturally characterized by gas adsorption (N2, 77 K), helium and mercury density and mercury porosimetry measurements. Electrical conductivity was determinated by impedance spectroscopy, at room temperature. Several works related to the electrical conductivity and to textural parameters of carbon blacks, such as: porosity, specific surface area, etc., have been carried out. However, there are a type of parameters, such as the fractal dimension, the percentage of macropores, the particle size, or the packing density, that are also related to the electrical conductivity, but they have not been previously investigated. In this work, it has been researched how the increase in interparticle/intraparticle porosity decreases the electrical conductivity of the samples studied. Therefore, it is possible to conclude that in this study a complete research work on electrical conductivity has been carried out.

Bioprinting is a complex process, highly dependent on bioink properties (materials and cells) and environmental conditions (mainly temperature, humidity and CO₂ concentration) during the bioprinting process. To guarantee proper cellular viability and an accurate geometry, it is mandatory to control all these factors. Despite internal factors, such as printing pressures, temperatures or speeds, being well-controlled in actual bioprinters, there is a lack in the controlling of external parameters, such as room temperature or humidity. In this sense, the objective of this work is to control the temperature and humidity of a new, atmospheric enclosure system for bioprinting. The control has been carried out with a decoupled proportional integral derivative (PID) controller that was designed, simulated and experimentally tested in order to ensure the proper operation of all its components. Finally, the PID controller can stabilize the atmospheric enclosure system temperature in 311 s and the humidity in 65 s, with an average error of 1.89% and 1.30%, respectively. In this sense, the proposed atmospheric enclosure system can reach and maintain the proper temperature and humidity values during post-printing and provide a pre-incubation environment that promotes stability, integrity and cell viability of the 3D bioprinted structures.