Ernande Eugenio Morais

Dr. Ernande Eugenio Morais

orcid

Research Focus & Metrics

Representative Publications

View All Publications
17 November 2022
Verified
Conference Paper
Closed access
ALAndre Abreu de M. Lima
Andre Abreu de M. Lima
Francisco SouzaFrancisco Souza
Francisco Souza
EMErnande Eugenio Morais
Ernande Eugenio Morais
DHDalton Honorio
Dalton Honorio
LBLuiz Barreto
Luiz Barreto
This article presents the framework proof of concept for fault detection and identification in power electronics converters using Digital Twins. Therefore, the Digital Twins contextualization on power electronics converter is presented since it is a recent trend in this research field. Moreover, a study and classification are carried out in terms of the main failures reported by the literature on power electronics. To validate the basic methodology, a buck dc-dc power converter simulation model was elaborated on Simulink, interfaced with an external DSP, providing the link with the real time requested by such monitoring applications. The results evidence that the intentional failure scenarios in the simulation are, indeed, identified and categorized by the external DSP. Thus, this proof of concept delivers the basic step for a framework capable to provide the communication of real power converters with their respective simulation model in order to provide data comparison in the monitoring of fault situations.

28 June 2019 in Energies
Verified
Journal Article
Open access
PDF file
EMErnande Eugenio Morais
Ernande Eugenio Morais
FLFrancisco Kleber de A. Lima
Francisco Kleber de A. Lima
JFJean M. L. Fonseca
Jean M. L. Fonseca
Carlos Gustavo Castelo BrancoCarlos Gustavo Castelo Branco
Carlos Gustavo Castelo Branco
LMLívia de A. Machado
Lívia de A. Machado
This work aims to analyze and validate through mathematical modeling and experimental results, in a three-phase three-wire electrical system, the technical viability of a static power converter with a two-level topology with only two controlled branches (2L2B), operating as a grid-side converter (GSC) in a wind turbine generator based on a doubly fed induction generator (DFIG). With this reduced-switches topology, the GSC is able to regulate the DC-link voltage level from the generator back-to-back converter and provide ancillary services of harmonic filtering and reactive power compensation from linear/nonlinear loads connected to the point of common coupling. An 8-kVA experimental prototype was implemented in the laboratory to validate the proposal. The prototype control system was realized using the dSPACE DS1103 PPC Controller Board platform programmed via MATLAB/Simulink. The effectiveness of the proposed system is verified by comparing the results obtained with the 2L2B topology to the ones with the usual two-level three-branch topology.

28 July 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
EMEmanuel de Araujo Mota
Emanuel de Araujo Mota
VRVinícius Vasconcelos Do Rêgo
Vinícius Vasconcelos Do Rêgo
RCRonny Gluber de Almeida Cacau
Ronny Gluber de Almeida Cacau
EMErnande Eugenio Morais
Ernande Eugenio Morais
RBRené Pastor Torrico Bascopé
René Pastor Torrico Bascopé
DHDalton Honorio
Dalton Honorio
Sustainable Development Goal 7 (SDG7) of the United Nations 2030 Agenda highlights theimportance of universal access to energy. As the 2030 deadline approaches, achieving this goal becomes increasingly challenging. This paper presents a renewable energy-based system for energy-poor communities based on a bio-electromechanical (BEM) approach. The system consists of an exercise bicycle coupled to a permanent magnet generator and portable photovoltaic modules. A half-bridge DC-DC converter is employed for energy conditioning. The system operates using both solar and human-generated energy, allowing users to provide supplementary power during periods of low or no solar irradiation. Experimental results show that the BEM system can deliver 1.6 Wh per minute of operation. Furthermore, a techno-economic analysis demonstrates that, after three years, the Levelized Cost of Energy (LCOE) becomes lower than that of a gasoline generator, both in standalone and hybrid configurations. These results confirm the feasibility of the proposed system.

1 October 2026 in Energies
Verified
Journal Article
Open access
PDF file
FTFernando Lessa Tofoli
Fernando Lessa Tofoli
DJDemercil Oliveira Junior
Demercil Oliveira Junior
DHDalton Honorio
Dalton Honorio
EMErnande Eugenio Morais
Ernande Eugenio Morais
VNVitoria Caroline Carvalho Do Nascimento
Vitoria Caroline Carvalho Do Nascimento
Telles Brunelli LazzarinTelles Brunelli Lazzarin
Telles Brunelli Lazzarin
The growing demand for green hydrogen has driven the development of efficient and grid-compatible power electronic converters for electrolyzer systems. In this context, this work provides a comprehensive overview of ac-dc and dc-dc converter topologies applicable to electrolyzers. Conventional multipulse rectifiers remain dominant in large-scale plants due to their robustness and low cost, although traditional 12-pulse rectifiers typically exhibit a current total harmonic distortion (THD) around 15%, failing to meet power-quality standards. Alternative solutions include hybrid and active front-end (AFE) rectifiers, which can improve power quality and controllability, with AFE configurations achieving near-unity power factor and current THD below 5% in the reviewed studies, enabling flexible operation and integration with renewable energy sources. Furthermore, non-isolated high step-down dc-dc converters can extend the conversion range and mitigate low-frequency current ripple. They can reduce dc-current ripple from typical values above 10% in six-pulse rectifiers to below 1% in AFE-based configurations, thereby enhancing electrolyzer lifetime and efficiency. A comparative analysis highlighting trade-offs among cost (ranging from approximately 85 to 160 €/kVA across the reviewed case studies), complexity, and performance is presented. In addition, emerging trends such as modular multilevel structures, interleaved topologies, and wide-bandgap semiconductor devices are identified as key enablers for future systems.