Plastics have become an essential part of our daily lives, and global plastic production has increased dramatically in the past 50 years. This has significantly increased the amount of plastic garbage produced. Researchers have recently been interested in using trash and recyclable plastics in concrete as an ecologically acceptable building material. A large number of publications have been published that describe the behavior of concrete, containing waste and recovered plastic com ponents. However, information is scattered, and no one knows how plastic trash behaves as concrete materials. This research examines the use of plastic waste (PW) as aggregate or fiber in cement mortar and concrete manufacturing. The article reviewed the three most significant features of concrete: fresh properties, mechanical strength, and durability. PW and cement connections were also studied using microstructure analysis (scan electronic microscopy). The results showed that PW, as a fiber, enhanced mechanical performance, but PW, as a coarse aggregate, impaired concrete performance owing to poor bonding. The assessment also identified research needs in order to enhance the performance of PW-based concrete in the future.

Dry stacking is an improved method of storing bauxite residue mud, a by-product of the Bayer process in the alumina industry. Stacking has the potential to increase the density and stability of the residue deposit, reducing the costs associated with the construction of impoundment areas. Minimizing the land area exposed to the residue mud also reduces the possibility of groundwater contamination. The stored residue is alkaline and carries the potential for environmental impacts over the long term. Carbonation is being evaluated at Alcoa World Alumina Australia’s (Alcoa’s) Kwinana Refinery in Western Australia, as a means of neutralizing residue alkalinity. This paper details the physical characteristics exhibited by bauxite residue following treatment with carbonation and/or the addition of bitterns. The impact of residue carbonation and bitterns addition on the initial drainage and drying behavior of bauxite residues was evaluated. The long term consolidation properties of the residues and the impact of ...

Over the last decades, new materials with outstanding performance have been introduced in the construction industry. Considering these new technologies, it is worth mentioning that nanotechnology has revolutionized various areas of engineering. In the area of civil engineering and construction, cement is used for various purposes and the search to improve its performance has been receiving growing interest within the scientific community. The objective of this research was to evaluate the behavior of cement mortar produced by the addition of multi-walled carbon nanotubes (MWCNTs) in different concentrations by comparing their physical and mechanical properties with the properties of the nanotube-free composite. Motivated by the lack of consensus in the literature concerning to the optimal dosage of CNTs in cementitious matrices, three different carbon nanotube ratios, 0.20, 0.40 and 0.60 wt % Portland cement, were investigated with the aim of evaluating the mechanical properties. Destructive tests were carried out to determine the compressive strength, flexural strength and split tensile strength. Additionally, a non-destructive test was performed to determine the dynamic elastic modulus and density. Scanning electron microscopy (SEM) images showed the interaction between the MWCNTs and the hydration products of Portland cement mortar. The results indicated the potential contribution of 0.40 wt % cement CNTs to the enhancement of the mechanical properties of the cement composite as a promising construction material.