Jiupeng Wu

Mr. Jiupeng Wu

College of Electrical Engineering, Zhejiang University

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 August 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
HXHongyi Xu
Hongyi Xu
NRNa Ren
Na Ren
ZZZhengyun Zhu
Zhengyun Zhu
JWJiupeng Wu
Jiupeng Wu
LLLi Liu
Li Liu
KSKuang Sheng
Kuang Sheng
In this work, the influences of P-well design and turn-off gate-to-source bias on the surge robustness of SiC MOSFET’s body diode are studied. Devices with high and low P-well doping concentration designs are stressed with surge current pulses when the gate-to-source is biased with 0 or −5 V. The gate-to-source bias is found to have effects on the surge capability of the low P-well doping-designed device. In the case of 0-V bias, the channel is prone to turning on and acquires a higher surge capability than the devices under the −5 V. On the other hand, the surge capability of high P-well doping-designed device is found less influenced by the gate-to-source bias. Furthermore, threshold voltage instability after repetitive surge pulses is also investigated. The device with low P-well doping shows better threshold stability due to its lower interface trap density. Based on the results above, a design methodology is proposed from the view of device mechanism and operation condition. Relatively low P-well doping design and negative gate bias are recommended for SiC MOSFET, as they can improve the single-pulse surge robustness of body diode and minimize the threshold voltage instability in repetitive surge pulse events.

11 June 2020 in Materials
Verified
Journal Article
Open access
PDF file
JWJiupeng Wu
Jiupeng Wu
NRNa Ren
Na Ren
QGQing Guo
Qing Guo
KSKuang Sheng
Kuang Sheng
A comparative study of surge current reliability of 1200 V/5 A 4H-SiC (silicon carbide) MPS (Merged PiN Schottky) diodes with different technologies is presented. The influences of device designs in terms of electrical and thermal aspects on the forward conduction performance and surge current capability were studied. Device forward characteristics were simulated and measured. Standard single-pulse surge current tests and thermal impedance measurements were carried to show their surge capability and thermal design differences. An advanced thermal RC (thermal resistance-capacitance) model, with the consideration of current distribution non-uniformity effects, is proposed to accurately calculate the device junction temperature during surge events. It was found that a thinner substrate and a hexagonal layout design are beneficial to the improvement of the bipolar conduction performance in high current mode, as well as the surge current capability. The thinner substrate design also has advantages on thermal aspects, as it presents the lowest thermal resistance. The calculated failure temperature during the surge tests is consistent with the aluminum melting phenomenon, which is regarded as the failure mechanism. It was demonstrated that, for a SiC MPS diode, higher bipolar conduction performance is conducive to restraining the joule heat, and a lower thermal resistance design is able to accelerate the heat dissipation and limit the junction temperature during surge events. In this way, the MPS diode using a thinner substrate and advanced layout design technology is able to achieve 60% higher surge current density capability compared to the other technologies.

20 April 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
NRNa Ren
Na Ren
JWJiupeng Wu
Jiupeng Wu
LLLi Liu
Li Liu
KSKuang Sheng
Kuang Sheng
In this work, a novel structure design concept (plasma spreading layer, PSL) is introduced into SiC Merged PiN Schottky (MPS) diode to improve the surge current capability. Compared to the isolated P+ island design in traditional MPS diode, the P+ islands in the proposed new structure are connected by the P+ plasma spreading layers which can spread bipolar current from P+ islands to the other parts of the device during the surge pulse. Therefore, the effective conducting area of the device is increased and the energy dissipation capability can be improved. 1.2kV SiC MPS diodes with two types of plasma spreading layers are designed and fabricated. Their forward characteristics and surge current capability are compared to traditional stripe cell and hexagonal cell designed MPS diodes. The experimental results show that, with the help of the plasma spreading layers, a 20% increase of energy dissipation capability is achieved by the new structure design, which results in a 10% improvement of the surge current capability.

6 April 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
JWJiupeng Wu
Jiupeng Wu
NRNa Ren
Na Ren
KSKuang Sheng
Kuang Sheng
High junction temperature is usually the main factor leading to device failures in high-power working conditions, such as surges or avalanches. It is of great significance to obtain the junction temperature quickly and accurately. Direct measurement of junction temperature is inconvenient, and usually indirect electrical measurement combined with model calculation is used. An electrothermal coupling junction temperature calculation model with distributed heat sources is proposed in this article. This model can accurately and quickly predict the device behavior during the surge process, as well as the voltage drop and temperature changes of each part of the device, without actually performing surge tests. This article describes the theoretical basis and calculation principles of the model. By taking a commercial SiC merged PiN Schottky diode as an example, this article also explains the details of the establishment of the electrical and thermal characteristic models of the device, as well as the calculation steps of the junction temperature by the thermal coupling model. The calculated device voltage drop curve of the device is in good agreement with the measured ones, and the calculated junction temperature curve is more consistent with the device failure mechanism than the one by the traditional RC thermal circuit model.

31 January 2021 in Materials
Verified
Journal Article
Open access
PDF file
HXHongyi Xu
Hongyi Xu
NRNa Ren
Na Ren
JWJiupeng Wu
Jiupeng Wu
ZZZhengyun Zhu
Zhengyun Zhu
QGQing Guo
Qing Guo
KSKuang Sheng
Kuang Sheng
This paper demonstrated the impact of process conditions on the surge current capability of 1.2 kV SiC junction barrier Schottky diode (JBS) and merged PiN Schottky diode (MPS). The influence of ohmic contact and defect density produced by implantation was studied in the simulation. The device fabricated with high temperature implantation had less defect density in the implant region compared with room temperature implantation, which contributed to higher hole injection in surge current mode and 20% surge capability improvement. In addition, with lower P+ ohmic contact resistance, the device had higher surge capability. When compared to device fabrication with a single Schottky metal layer in the device active area, adding additional P+ ohmic contact on top of the P+ regions in the device active area resulted in the pn junctions sharing a greater portion of surge current, and improved the devices’ surge capability by ~10%.