Jahanzeb Javaid

Mr. Jahanzeb Javaid

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
MSMuhammad Usman usman Siddiq
Muhammad Usman usman Siddiq
MAMuhammad Kashif Anwar
Muhammad Kashif Anwar
FAFaris Almansour
Faris Almansour
Jahanzeb JavaidJahanzeb Javaid
Jahanzeb Javaid
MQMuhammad Ahmed Qurashi
Muhammad Ahmed Qurashi
Due to the increasing environmental concerns and the growing generation of electronic waste and plastic, sustainable waste management solutions are essential for the construction industry. This study explores the potential of using electronic waste toner powder (WTP) and recycled low-density polyethylene (LDPE), either individually or in combination as modifiers for asphalt binder to enhance pavement performance and reduce environmental impact. The analysis focused on three key components: (1) binder development and testing; (2) performance evaluation through Marshall stability, indirect tensile strength, and Dynamic Shear Rheometer (DSR) testing for rutting resistance; and (3) sustainability assessment in terms of carbon footprint reduction. The results revealed that the formulation of 25% WTP and 8% LDPE processed at 160 °C achieved the best mechanical performance and lowest carbon index, enhancing Marshall stability by 32% and rutting resistance by 41%. Additionally, this formulation reduced the carbon footprint by 27% compared to conventional asphalt. The study demonstrated that the combination of WTP and LDPE significantly improves the sustainability and performance of asphalt pavements, offering mechanical, environmental, and economic benefits. By providing a quantitative assessment of waste-modified asphalt, this study uniquely demonstrates the combined use of WTP and LDPE in asphalt, offering a novel dual-waste valorization approach that enhances pavement performance while promoting circular economy practices.

1 October 2019 in Symmetry
Verified
Journal Article
Open access
PDF file
MHMuhammad Hamza Hanif
Muhammad Hamza Hanif
MAMuhammad Adnan
Muhammad Adnan
DSDr. SYYED ADNAN RAHEEL SHAH
Dr. SYYED ADNAN RAHEEL SHAH
NKNasir Mahmood Khan
Nasir Mahmood Khan
MNMehwish Nadeem
Mehwish Nadeem
MWMuhammad Waseem
Muhammad Waseem
Sustainable engineering practices always provide an opportunity for engineers to produce long-term solutions. In the fields of construction and irrigation, soil bed formation symmetry is very important, especially in the case of its behavior with reference to water runoff, whether natural or artificial. In this study, different soil bed formations were tested with the help of advanced hydrology apparatus under severe rainfall conditions. A major focus was to observe the water retention and volume discharge with reference to soil combinations and slope level change. Furthermore, an advanced decision-making technique incorporating artificial neural networks (ANNs) was used to predict and explore the interrelationship behavior of different parameters. It was observed that ST-1 (100% clay) performed well as it tried to retain a large quantity of water (7.28 L/min), making it suitable for irrigation, while ST-2 (100% sand) performed better for structures, as sand tries to quickly drain water, thus retaining less water (0.16 L/min). Change of slope was also another factor; at a 3% slope level along with 100% clay, water resistance was higher as compared to sand. Soil type-3 (ST-3) helped in the retention of water even at a 3% soil bed slope. This study will help engineers and designers in the optimization of soil bed formation for construction and irrigation purposes.

17 June 2026 in Infrastructures
Verified
Journal Article
Open access
PDF file
WZWu Zhengyu
Wu Zhengyu
Jahanzeb JavaidJahanzeb Javaid
Jahanzeb Javaid
MSMuhammad Usman usman Siddiq
Muhammad Usman usman Siddiq
MQMuhammad Ahmed Qurashi
Muhammad Ahmed Qurashi
PLPing Lyu
Ping Lyu
The increasing generation of waste toner from printers and photocopiers presents significant environmental and disposal challenges. This study investigates the feasibility of utilizing waste toner as a modifier in asphalt binder to enhance performance and sustainability. Bitumen with a penetration grade of 60/70 was modified with waste toner at varying contents (0–30%). The modified binders were evaluated using penetration, ductility, and softening-point tests to assess their physical behavior. Results indicate that increasing toner content reduces penetration and ductility while improving the softening point, indicating enhanced temperature resistance. Furthermore, asphalt mixtures were evaluated using both destructive (Marshall stability) and non-destructive testing (ultrasonic pulse velocity) methods to provide a comprehensive performance assessment. In addition, an artificial neural network (ANN) model was developed to predict and evaluate the performance of toner-modified mixtures. The findings demonstrate that waste toner can be effectively used as a sustainable modifier in asphalt mixtures, thereby improving material performance and reducing environmental impact.

5 August 2026 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
MOHAMMAD ASHRAF HOSSAINMOHAMMAD ASHRAF HOSSAIN
MOHAMMAD ASHRAF HOSSAIN
MSMuhammad Usman usman Siddiq
Muhammad Usman usman Siddiq
Jahanzeb JavaidJahanzeb Javaid
Jahanzeb Javaid
MMMohamed Elobaid Musa Moneef
Mohamed Elobaid Musa Moneef
This work presents ANSYS Workbench simulations analyzing fatigue crack propagation in high-performance aluminum alloys 2524-T3, 2024-T42, and 2024-T351 under stress ratios R = 0.1, 0.3, and 0.5 using pre-meshed crack tools and SMART Fracture automation. Key simulation outputs include crack length evolution, cycle count, equivalent stress intensity factor ranges (ΔK), and crack resistance curves (Kr). At R = 0.1, 2524-T3 exhibited the highest crack growth rate (da/dN = 3.20×10⁻⁸ mm/cycle, ΔK = 7.28 MPa√m, Nf ≈ 459×10⁶ cycles), while 2024-T351 showed the lowest rate (da/dN = 2.76×10⁻⁹ mm/cycle, ΔK = 1.65 MPa√m, Nf ≈ 5.27×10⁹ cycles) — a 10.4-fold reduction in da/dN and 11.5-fold increase in fatigue life. At R = 0.5, 2024-T351 achieved da/dN < 1.0×10⁻⁸ mm/cycle with Nf > 6×10⁹ cycles, outperforming 2024-T42 (da/dN = 3.82×10⁻⁹ mm/cycle, Nf ≈ 2.92×10⁹) and 2524-T3 (da/dN = 2.76×10⁻⁹ mm/cycle, Nf ≈ 5.27×10⁹). Kr curve analysis revealed steep resistance decay for 2524-T3 (R = 0.1), stable plateau behavior for 2024-T42 (R = 0.3–0.5), and rising Kr trends for 2024-T351 across all R-ratios, indicating active crack-tip shielding mechanisms. SEM fractography validated simulation trends: 2524-T3 showed brittle trans granular features with secondary crack density of 12.3 ± 2.1 cracks/mm²; 2024-T42 exhibited mixed-mode fracture with moderate dimple density (8.7 ± 1.4 μm⁻²); 2024-T351 displayed ductile dimple morphology with the highest dimple density (18.4 ± 2.6 μm⁻²) and minimal secondary cracking (2.1 ± 0.8 cracks/mm²). These microstructural metrics confirm 2024-T351 as the optimal candidate for fatigue-critical aerospace and automotive applications.