The biologically discovered intrinsic plasticity (IP) learning rule, which changes the intrinsic excitability of an individual neuron by adaptively turning the firing threshold, has been shown to be crucial for efficient information processing. However, this learning rule needs extra time for updating operations at each step, causing extra energy consumption and reducing the computational efficiency. The event-driven or spike-based coding strategy of spiking neural networks (SNNs), i.e., neurons will only be active if driven by continuous spiking trains, employs all-or-none pulses (spikes) to transmit information, contributing to sparseness in neuron activations. In this article, we propose two event-driven IP learning rules, namely, input-driven and self-driven IP, based on basic IP learning. Input-driven means that IP updating occurs only when the neuron receives spiking inputs from its presynaptic neurons, whereas self-driven means that IP updating only occurs when the neuron generates a spike. A spiking convolutional neural network (SCNN) is developed based on the ANN2SNN conversion method, i.e., converting a well-trained rate-based artificial neural network to an SNN via directly mapping the connection weights. By comparing the computational performance of SCNNs with different IP rules on the recognition of MNIST, FashionMNIST, Cifar10, and SVHN datasets, we demonstrate that the two event-based IP rules can remarkably reduce IP updating operations, contributing to sparse computations and accelerating the recognition process. This work may give insights into the modeling of brain-inspired SNNs for low-power applications.

Intrabody communication (IBC) is a wireless communication technology using the human body to develop body area networks (BANs) for remote and ubiquitous monitoring. IBC uses living tissues as a transmission medium, achieving power‐saving and miniaturized transceivers, making communications more robust against external interference and attacks on the privacy of transmitted data. Due to these advantages, IBC has been included as a third physical layer in the IEEE 802.15.6 standard for wireless body area networks (WBANs) designated as Human Body Communication (HBC). Further research is needed to compare both methods depending on the characteristics of IBC application. Challenges remain for an optimal deployment of IBC technology, such as the effect of long‐term use in the human body, communication optimization through more realistic models, the influence of both anthropometric characteristics and the subject’s movement on the transmission performance, standardization of communications, and development of small‐size and energy‐efficient prototypes with increased data rate. The purpose of this work is to provide an in‐depth overview of recent advances and future challenges in human body/intrabody communication for wireless communications and mobile computing.

Muscle fatigue, as a common physiological phenomenon, has attracted much attention in the fields of rehabilitation and athletic training. A wearable technology for monitoring the muscle fatigue anytime and anywhere is urgently needed. In this paper we apply Electrical impedance myography (EIM) technique, usually used for non-invasive detection of neuromuscular diseases with the four-electrode array, for evaluation of the local muscle fatigue status via the variation of electrical impedance. An equivalent multilayer inhomogeneous 3D finite element model of human arm was built in order to optimize the four-electrode configuration to improve EIM detection sensitivity. Current density in muscle layer and differential potential of induction electrodes were selected as the evaluation indexes for optimization. Then the in vivo experiments of dynamic contraction with different maximal voluntary contractions (MVC) were performed on the biceps brachii muscle of eight healthy volunteers. The results showed that muscle resistance (R) decreased almost 8 Ω from the completely relaxed muscle to exhaustion, which is the same trend as for the median frequency (MF) of measured surface electromyography (sEMG) signals. The model and experiments in this paper indicate the feasibility and efficiency of EIM for detection of muscle fatigue using wearable devices.

Existing research on human channel modeling of galvanic coupling intra-body communication (IBC) is primarily focused on the human body itself. Although galvanic coupling IBC is less disturbed by external influences during signal transmission, there are inevitable factors in real measurement scenarios such as the parasitic impedance of electrodes, impedance matching of the transceiver, etc. which might lead to deviations between the human model and the in vivo measurements. This paper proposes a field-circuit finite element method (FEM) model of galvanic coupling IBC in a real measurement environment to estimate the human channel gain. First an anisotropic concentric cylinder model of the electric field intra-body communication for human limbs was developed based on the galvanic method. Then the electric field model was combined with several impedance elements, which were equivalent in terms of parasitic impedance of the electrodes, input and output impedance of the transceiver, establishing a field-circuit FEM model. The results indicated that a circuit module equivalent to external factors can be added to the field-circuit model, which makes this model more complete, and the estimations based on the proposed field-circuit are in better agreement with the corresponding measurement results.

People's increasing demand for high-quality network services has prompted the continuous attention and development of network traffic classification (NTC). In recent years, deep flow inspection (DFI) is considered to be the most effective and promising method to solve the NTC. However, DFI still cannot effectively address the problem of changes in flow characteristics of complex packet flows and the discovery of new traffic categories. In this paper, we propose a metric learning based deep learning solution with feature compressor, named deep flow embedding (DFE). The feature compressor is used to compress the feature information transmitted layer by layer in DL backbone while maintaining the computational accuracy, so that the backbone can remove as much noise, redundancy, and other irrelevant information from the input data as possible, and achieve more robust feature extraction of network traffic flow. The deep learning (DL) backbone generates an embedding vector for each network packet flow. Then the embedding vector is compared with the vector template preset for each traffic type in the template library to determine the category of the packet flow. Experimental results verify that our method is more effective than the traditional DFI methods in overcoming the problems of flow characteristics variation and new category discovery.