The paper reviews the state of water quality in Ialomita River Basin (IRB), Romania, between 2007 and 2018 using the land use/land cover and basin-specific conditions effects on sediments and nutrients load. On-site monitoring was performed in two control sections of the Ialomita River, one in the upper part of the basin (near Targoviste city) and the second near the discharge into the Danube (downstream of Tandarei town). The statistical averages of water parameters for 10 years’ monitoring in the control section that is close to the Ialomita River discharge in Danube were pH = 7.60 (range: 6.41–8.40), NH₄-N = 1.20 mg/L (0.02–14.87), alkalinity = 4.12 mmol/L (1.34–6.27), NO₃-N = 2.60 mg/L (0.08–17.30), PO₄-P = 0.09 mg/L (0–0,31), dissolved oxygen (DO) = 8.87 mg/L (2.72–15.96), BOD₅ = 5.50 mg/L (0.01–74.71), suspended solids (TSS) = 508.32 mg/L (15.2–4457), total dissolved salts (TDS) = 733.69 mg/L (455.2–1053), and river discharge = 38.60 m³/s (8.22–165). Expected mean concentration and soil and water assessment tool (SWAT) modeling have been employed in the GIS environment to extend the approach to large spatial patterns within the basin. The estimated average specific emission on the total area for nitrogen was 3.2 kg N/ha, and 0.3 kg P/ha for phosphorus highly influenced by the agricultural activities. The results are useful to raise awareness regarding water-quality degradation and the need to stop and even reverse such trends for local and national sustainable development.

As the fertile topsoil is constantly washed away and agricultural production is decreased, soil erosion is a serious environmental issue that affects the entire planet. All river basins experience changes in land use that affect sediment dynamics, soil erodibility, and hydrologic response. The main reason for the faster erosion rates is frequently attributed to those alterations. In the current study, the Intensity of Erosion and Outflow (IntErO) model was used to estimate the sediment yield and maximum outflow from three river basins in Cluj County, Transylvania, Romania. Because the county is hilly and has significant erosion issues, it is essential to have a solid understanding of how soil erosion occurs in river basins. This will allow for more precise planning of soil conservation projects and will allow for more effective management of the severity of the erosion processes. The IntErO model offers quick, efficient, and feasible insight into how changing land use affects soil erosion processes. The testing of the procedures that have been put into place is an essential component of the ongoing development of watershed management strategies at the regional level. The relief characteristics and predominant land use of the three selected prototype river basins significantly influenced the resulting real soil losses. The application of the IntErO model in assessing soil erosion rates in the Transylvanian hills represents a novel approach. The findings of this study hold potential for informing policymakers in the formulation of more robust regulations pertaining to soil and water conservation. Consequently, the implementation of such measures is expected to contribute to the safeguarding of river basin soils.

This paper explores the broad probiotic and functional properties of two non-Saccharomyces strains (MI120 and MI125) and one Saccharomyces cerevisiae BB06 strain (as a reference probiotic). Torulaspora delbrueckii MI120 and Starmerella bacillaris MI125 were identified via 5.8S rDNA sequencing. All the strains survived well in simulated gastrointestinal conditions and had strong antioxidant activity (>68%). S. bacillaris MI125 excelled in antimicrobial activity against Gram-positive and Gram-negative bacteria. S. bacillaris MI125 and Sacch. cerevisiae BB06 resisted all the tested antibiotics. No strain displayed hemolytic behavior. The freeze-dried yeast strains achieved survival rates between 76.62% and 93.38%. Based on our physiological characterization analysis (carbon assimilation, ethanol tolerance, acetic acid and H₂S production, temperature and low pH tolerance, enzymatic pattern, and killer phenotype), all the strains showed interesting attributes, with Sacch. cerevisiae BB06 fermenting vigorously in malt extract medium. Beer fermented with T. delbrueckii MI120 had the highest phenolic content (96.02 μg GAE·mL⁻¹) and antioxidant activity (90.43%), matching commercial Sacch. cerevisiae US-05 in sensory traits such as taste and aroma. However, after two months in bottled beer, the yeast viability decreased to 2–3 log CFU·mL⁻¹. The pilot brewing and the assessments of the strains’ technological, physico-chemical, and sensorial properties confirmed their suitability for industrial brewing. Overall, T. delbrueckii MI120 emerges as a promising brewing strain, and S. bacillaris MI125 is a potential probiotic.

Organic farmers farming on arable land have often had, in addition to the cultivation of common species of cultivated crops (such as wheat, rye, triticale or potatoes), interest in the cultivation of marginal crops such as hulled wheat species (Einkorn, Emmer and Spelt wheat). The production of marginal cereals has seen significant developments in the European Union related to the development of the organic farming sector. Just the average annual organic production of spelt in the Czech Republic reached more than 9000 tons in 2018. The cultivation of these cereals requires post-harvest treatment in the special method of dehulling. The waste emerging after dehulling of spikelet (i.e., chaff) accounts for about 30% of the total amount of harvest and can be used as an alternative fuel material. When considering the energy utilization of this waste, it is also necessary to obtain information on the energy quality of the material, as well as environmental aspects linked to their life cycle. For evaluating the energy parameters, the higher and lower heating value, based on the elemental (CHNS) analysis, was determined. The environmental aspects were determinate according to the Life Cycle Assessment (LCA) methodology where the system boundary includes all the processes from cradle to farm gate, and the mass unit was chosen. The SimaPro v9.1.0.11 software and ReCiPe Midpoint (H) within the characterization model was used for the data expression. The results predict the energy potential of chaff about 50–90 TJ per year. The results of this study show that in some selected impact categories, 1 kg of chaff, as a potential fuel, represents a higher load on the environment than 1 kg of lignite, respectively potential energy gain (1 GJ) from the materials.

The use of renewable energy resources is gaining more and more ground, thanks to the continuous increase in the price of fossil energy and the decrease in stocks, and the management of waste from nuclear energy production, respectively. The implementation of an energy strategy to harness the potential of renewable energy sources (RES) is part of the coordinates of Romania’s medium – and long-term energy development and provides the appropriate framework for the making of decisions on energy alternatives and the inclusion in the Community acquis in the field. In this respect, a study on the biomass potential of Timiş County and on the possibilities of producing unconventional energy from biomass has been carried out. The study is based on research, data collection from the literature, as well as from official documents or official websites, the processing and interpretation of the data and their quantitative and qualitative analysis. It was concluded that biomass is a promising renewable energy source for Romania, both in terms of potential and in terms of usability.

This study investigates the synergistic influence of multi-walled carbon nanotubes (MWC-NTs), nanosilica powder (NSP), and polypropylene fiber waste (PFW) on the mechanical performance of mortar incorporating demolished concrete waste aggregates (DCWA). The replacement of natural aggregates with DCWA typically results in strength reductions and weak interfacial transition zones; therefore, the combined use of nanomaterials and microfibers is proposed as a mitigation strategy. A Taguchi Design of Experiments (DOE) approach was employed to optimize mix parameters, including MWCNT dosage, NSP content, PFW volume fraction, and DCWA replacement level. Mortar mixtures were prepared with MWCNTs (0–0.1% by binder weight), NSP (0–2% by binder weight), PFW (0–0.3% by volume), and DCWA (0–20% replacement of fine sand). Mechanical performance was assessed through compressive and flexural strength tests. A combined statistical approach using the Pareto chart and ANOVA identified the most influential parameters and their respective contributions to the response variable. The innovative aspect of this research lies in the synergistic integration of MWCNTs, NSP, demolished concrete waste, and polypropylene fiber waste within the mortar matrix, with the incorporation of nanomaterials specifically intended to compensate for the strength reduction typically induced by the use of demolition concrete waste aggregates. Although a potential nano-scale synergy between MWCNTs and NSP was initially considered, the experimental results indicated that the most relevant synergistic effects occurred among broader mix parameters rather than specifically between the two nanomaterials. Even so, when assessed individually, both nanomaterials contributed to improving the mechanical characteristics of the mortar—particularly nanosilica, which demonstrated a more pronounced effect—yet these individual enhancements did not translate into a distinct synergistic interaction between MWCNTs and NSP. The Taguchi DOE proved to be an efficient tool for multiple factor analysis, enabling reliable identification of the most influential parameters with a minimum number of tests. Its application facilitated the development of mortar mixtures that effectively integrate demolition waste while achieving enhanced mechanical performance through nano- and micro-scale reinforcement.