Aqeel Hussain Naqvi

Mr. Aqeel Hussain Naqvi

Chung Ang University
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 September 2018 in Sensors
Verified
Journal Article
Open access
PDF file
Aqeel Hussain NaqviAqeel Hussain Naqvi
Aqeel Hussain Naqvi
Sungjoon LimSungjoon Lim
Sungjoon Lim
Owing to the rapid growth in wireless data traffic, millimeter-wave (mm-wave) communications have shown tremendous promise and are considered an attractive technique in fifth-generation (5G) wireless communication systems. However, to design robust communication systems, it is important to understand the channel dynamics with respect to space and time at these frequencies. Millimeter-wave signals are highly susceptible to blocking, and they have communication limitations owing to their poor signal attenuation compared with microwave signals. Therefore, by employing highly directional antennas, co-channel interference to or from other systems can be alleviated using line-of-sight (LOS) propagation. Because of the ability to shape, switch, or scan the propagating beam, phased arrays play an important role in advanced wireless communication systems. Beam-switching, beam-scanning, and multibeam arrays can be realized at mm-wave frequencies using analog or digital system architectures. This review article presents state-of-the-art phased arrays for mm-wave mobile terminals (MSs) and base stations (BSs), with an emphasis on beamforming arrays. We also discuss challenges and strategies used to address unfavorable path loss and blockage issues related to mm-wave applications, which sets future directions.

18 March 2019 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Aqeel Hussain NaqviAqeel Hussain Naqvi
Aqeel Hussain Naqvi
Sungjoon LimSungjoon Lim
Sungjoon Lim
In this paper, we demonstrate a beam-steering antenna using a fluidically programmable metasurface (FPMS). The proposed FPMS-based antenna consists of a source antenna and a bi-layered programmable metasurface as a superstrate. The metasurface is composed of a 4 × 4 square-ring element array on the top side of a thin dielectric substrate and 3-D-printed fluidic channels for fluid movement as the bottom layer. The switchable phase of the metasurface was obtained by realizing air holes of equal dimensions inside the dielectric polylactic acid substrate using 3-D-printing technology. The simplicity of the approach is acquired from the beam-steering properties through programmable water injection in different channels. Beam-steering of ±20° in the elevation plane with a 10-dB impedance bandwidth of 2.57–2.64 GHz was achieved. A stable radiation gain of more than 6 dBi was demonstrated across the operating bandwidth. To validate the concept, an antenna prototype was fabricated, and far-field measurements were performed. The simulation and measurement results showed good agreement and confirmed the proposed concept. The proposed antenna has a low profile and was fabricated at low cost, and thus is a cheap and accessible way to control the electromagnetic waves in the microwave region using water.

22 August 2019 in IEEE Access
Verified
Journal Article
Open access
Syeda NaqviSyeda Naqvi
Syeda Naqvi
Aqeel Hussain NaqviAqeel Hussain Naqvi
Aqeel Hussain Naqvi
FAFarzana Arshad
Farzana Arshad
MRMuhammad A. Riaz
Muhammad A. Riaz
MAMuhammad Azam
Muhammad Azam
HTHannu Tenhunen
Hannu Tenhunen
In this work, an integrated antenna system with Defected Ground Structure (DGS) is presented for Fourth Generation (4G) and millimeter (mm)-wave Fifth Generation (5G) wireless applications and handheld devices. The proposed design with overall dimensions of 110 mm × 75 mm is modeled on 0.508 mm thick Rogers RT/Duroid 5880 substrate. Radiating structure consists of antenna arrays excited by the T-shape 1 × 2 power divider/combiner. Dual bands for 4G centered at 3.8 GHz and 5.5 GHz are attained, whereas the 10-dB impedance bandwidth of 24.4 -29.3 GHz is achieved for the 5G antenna array. In addition, a peak gain of 5.41 dBi is demonstrated across the operating bandwidth of the 4G antenna array. Similarly, for the 5G mm-wave configuration the attained peak gain is 10.29 dBi. Moreover, significant isolation is obtained between the two antenna modules ensuring efficient dualfrequency band operation using a single integrated solution. To endorse the concept, antenna prototype is fabricated and far-field measurements are procured. Simulated and measured results exhibit coherence. Also the proposed design is investigated for the beam steering capability of the mm-wave 5G antenna array using CST®MWS®. The demonstrated structure offers various advantages including compactness, wide bandwidth, high gain, and planar configuration. Hence, the attained radiation characteristics prove the suitability of the proposed design for the current and future wireless handheld devices.

4 March 2021 in Electronics
Verified
Journal Article
Open access
PDF file
Adnan GhaffarAdnan Ghaffar
Adnan Ghaffar
Xue Jun LiXue Jun Li
Xue Jun Li
Wahaj Abbas AwanWahaj Abbas Awan
Wahaj Abbas Awan
Aqeel Hussain NaqviAqeel Hussain Naqvi
Aqeel Hussain Naqvi
Niamat HussainNiamat Hussain
Niamat Hussain
Ernesto LimitiErnesto Limiti
Ernesto Limiti
This research article proposes a compact frequency and pattern reconfigurable flexible antenna for heterogeneous applications. A triangular monopole antenna with a semicircular stub is made frequency and pattern tunable by connecting and disconnecting two inverted L-shaped stubs utilizing diodes. When either of the stubs is connected to the radiator, a relative phase difference happens at both ends of the radiator that changes the direction of the electromagnetic radiations, consequently pattern reconfigurability can be obtain. Besides that, because of the reactive load introduced by the stubs, the antenna’s effective length has changed and, as a result, the frequency reconfigurability can be attained. The antenna features a compact size of 40 × 50 × 0.254 mm3 corresponding to 0.22λo × 0.27λo × 0.001λo, where λo is free-space wavelength at 1.65 GHz, while its operational bandwidth is from 1.65 GHz to 2.51 GHz, with an average gain and radiation efficiency of better than 2.2 dBi and 80%, exhibiting a pattern reconfigurability of 180° in the E-plane. The frequency of the proposed antenna can be switched from 2.1 GHz to 1.8 GHz by switching the state of both diodes in OFF and ON-state, respectively. The fabricated prototype of the antenna is tested to verify its performance parameters. In addition, to validate the proposed design, it has been compared with prior arts in terms of the overall size, reconfigurability type, flexibility, radio frequency (RF) switch type used for reconfigurability, and frequency bandwidth. The proposed antenna provides smaller size with a large bandwidth coverage alongside with discrete RF switch type with the advantages of flexibility and both frequency and pattern reconfigurability. As a result, the proposed compact flexible and pattern reconfigurable antenna is a promising candidate for heterogeneous applications, including the global system for mobile (GSM) band (1800 and 1900 MHz) and industrial, scientific and medical (ISM) band (2.4 GHz) along with well-known cellular communication bands of 3G, 4G, and long term evolution (LTE) bands ranging from 1700–2300 MHz around the globe.

18 August 2020 in IEEE Access
Verified
Journal Article
Open access
ASAhmed Salim
Ahmed Salim
Aqeel Hussain NaqviAqeel Hussain Naqvi
Aqeel Hussain Naqvi
DPDuc Anh Pham
Duc Anh Pham
Sungjoon LimSungjoon Lim
Sungjoon Lim
Single-resonance-based radio frequency (RF) resonators cannot detect multiple cracks simultaneously nor localize the position of a crack. To address these drawbacks, we propose a complementary split-ring resonator (CSRR)-loaded array. In this array, there are four channels and each channel consists of three CSRRs, forming a 4×3 sensing array that is developed in the ground plane of a microstrip line using a low-cost FR4 substrate. A voltage-controlled oscillator (VCO) generates three discrete frequencies: 1.88 GHz, 2.60 GHz, and 3.61 GHz to each channel, which is sequentially selected using a single-pole four-throw (SP4T) switch. The transmitted RF signals are converted into the DC voltage levels and are interpreted by a microcontroller. Aluminum sheets with cracks embedded in the surface are used to demonstrate the detection of cracks of various shapes, sizes and locations/orientations (horizontal, diagonal, and vertical) with simulations and measurements. The detection of the minimum detectable crack (Wc×Lc×Dc = 1 mm × 10 mm × 0.1 mm) is experimentally verified. Full-length longer cracks (Lc = 100 mm) are also detected using our proposed detection system with the SP4T switch in addition to our proposed algorithm that scans the CSRRs of each selected channel.

26 September 2018 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
Aqeel Hussain NaqviAqeel Hussain Naqvi
Aqeel Hussain Naqvi
Sungjoon LimSungjoon Lim
Sungjoon Lim
This paper reports a polarization-switchable metasurfaced antenna, which comprises a source antenna and a metasurface as a superstrate. The metasurface consists of a 4 × 4 microfluidic element array, and each element is designed with a rectangular loop with diagonals formed by microfluidic injection. The left-hand circular polarization (LHCP), right-hand circular polarization (RHCP), and linear polarization (LP) are achieved by microfluidic injection through different channel inlets on the metasurface. The performance of proposed antenna in terms of polarization reconfigurability, axial ratio bandwidth (ARBW), impedance bandwidth, broadside gain, and radiation pattern are experimentally verified after fabrication. The experimental results show that the proposed antenna achieves a 3-dB ARBW from 2.47 to 2.55 GHz (i.e., fractional bandwidth of 3.18%) for LHCP and RHCP, with the realized peak gains of 5.86 dBi and 5.84 dBi in boresight for LHCP and RHCP respectively, at 2.51 GHz. The 10-dB impedance bandwidth of the antenna in LP mode is from 2.32 to 2.52 GHz and from 2.41 to 2.59 GHz in LHCP and RHCP modes, respectively (i.e., fractional bandwidth of 7.2%).