Maksim Dudkin

Prof. Maksim Dudkin

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2017
Verified
Conference Paper
Closed access
MDMaksim Dudkin
Maksim Dudkin
OBO. G. Brylina
O. G. Brylina
DPD. A. Ponosov
D. A. Ponosov
The paper is focused on technical performance and design of the thyristor voltage converter (TVC) with an adaptive control system for a smooth start of induction motors and a power semiconductor thyristor-diode. A distinctive feature of ab adaptive TVC is that its pulse-phase control system is based on closed integrating scanning converters (SCs). All SCs operate in an external synchronization mode with supply mains frequency and are used as synchronization and phase-shift units in the control system. They essentially simplify technical implementation of the TVC and ensure its reliable operation at high external noises including commutative and impulsive distortions, as well as at amplitude and frequency instability of supply mains. All the above benefits allows application of these converters at the facilities with problematic mains and at stand-alone power supplies of limited capacity. The paper shows TVC's implementation results, technical and economic indices of asynchronous electric drives used for process facilities at the Chelyabinsk pipe-rolling plant.

27 September 2023 in Izvestia MGTU MAMI
Verified
Journal Article
Open access
PDF file
ASAlexander Николаевич N. Shishkov
Alexander Николаевич N. Shishkov
MDMaksim Dudkin
Maksim Dudkin
VLVan Kan Le
Van Kan Le
BACKGROUND:Ensuring the voltage balance of the neutral point of the DC link within acceptable limits is one of the mandatory requirements during the operation of a three-level autonomous neutral point clamped voltage source inverter. It is known that neutral point voltage imbalance can adversely affect the operation of the inverter and the load at all, lead to the failure of both power switches and capacitors in the DC link. Neutral point voltage imbalance mostly often occurs due to the asymmetry of the nominal values of DC capacitors, inconsistent properties of switching devices, asymmetric three-phase load, and also due to the imperfection of the converter control algorithm. AIMS:Selection of the optimal switching sequence that ensures the smallest deviation of the neutral point voltage and the number of switching of power switches in a three-level voltage source inverter. METHODS:For an objective comparison of the considered switching sequences and their influence on the neutral point voltage balance, a simulation model of a three-level neutral point clamped voltage source inverter was developed in theMATLAB/Simulinksoftware. To control this inverter, a space vector modulation method was used with three different switching sequences: five-segment, seven-segment and standard. RESULTS:The topology of a three-level neutral point clamped voltage source inverter is presented. The experimental dependencies of the neutral point voltage deviation error was taken with a change in the modulation coefficient, the frequency of the fundamental harmonic at the inverter output, and load characteristics for three different switching sequences. CONCLUSIONS:In this paper, the influence of the basic vectors and the influence of switching sequences on the neutral point voltage balance are studied. Combinations of states of large and zero basic vectors do not affect the neutral point voltage. For the medium basic vectors, the neutral point voltage can increase or decrease depending on the operating conditions of the inverter. The small basic vectors significantly affect the neutral point voltage. Considering the abovementioned, the seven-segment sequence that ensures both the optimal balance of the neutral point voltage and the level of switching losses should be considered as the best switching sequence for a three-level inverter.

1 January 2025 in Bulletin of the South Ural State University Series "Power Engineering"
Verified
Journal Article
Open access
PDF file
SUSouth Ural State University
South Ural State University
MDMaksim Dudkin
Maksim Dudkin
NEN.A. Eremin
N.A. Eremin
MDM.A. Dziuba
M.A. Dziuba
VSV.D. Sycheva
V.D. Sycheva
This paper considers a current stabilization system (CSS) for non-ferrous metal electrolysis (NME) based on a three-phase alternating voltage regulator (VR) with a booster transformer (BT) and a 12-pulse diode rectifier. The system differs from prior art by its improved indicators of electromagnetic compatibility (EMC) of the complex with the power supply network due to reduced reactive power consumption and improved supply voltage quality. The DC voltage (current) is regulated at the CSS output by switching taps in the rectifier transformer (RT) and regulating the alternating voltage between the taps using the VR on the high voltage side. The paper proposes a control system for the VR which provides for the automatic switching of the RT taps with a smooth regulation of the alternating voltage in the in-phase and antiphase modes between the taps. It allows cutting the VR power in half and, as a consequence, its cost. The proposed system also compensates for higher harmonics of the voltage at the VR output caused by the nonlinear input current of the 12-pulse diode rectifier, which improves supply voltage quality. The efficiency of the current stabilization system based on the VR with the BT is confirmed by computer modeling in the MatLab+Simulink environment. It was used to compare the results with a widespread current stabilization system, in which the DC voltage is jointly regulated by the phase control of thyristors or saturable reactors and switching of the RT taps on the primary side. The experimental dependences of tgφ, the power factor, and harmonic distortions of the network current and voltage are presented depending on the regulation depth of the 12-pulse rectifier within the first switching zone of the no-load tap changer (NLTC-1) in the rectifier transformer. The obtained results showed that in the nominal operating mode of the CSS based on the VR with the BT, compared to the CSS based on the thyristor or saturable reactor phase control method, the maximum consumption of reactive power decreases from 0.422 to 0.267 (according to the average value within one tap from 0.348 to 0.267), and the voltage distortion coefficient of the network decreases from 8.8% to 6.2% (according to the average value within one tap from 7.7% to 6.2%) at a given ratio of the network short-circuit power. This will allow non-ferrous metal electrolysis enterprises to avoid fines for excess permissible reactive power or additional capital investments in the purchase of expensive equipment for reactive power compensation, as well as to improve the EMC and operational reliability of the complex. В статье рассмотрена система стабилизации тока (ССТ) для электролиза цветных металлов (ЭЦМ) на основе трехфазного регулятора переменного напряжения (РН) с вольтодобавочным трансформатором (ВДТ) и 12-пульсным диодным выпрямителем, отличающаяся от известных технических решений улучшенными показателями электромагнитной совместимости (ЭМС) комплекса с питающей сетью за счет снижения потребления реактивной мощности и улучшения качества питающего напряжения. Регулирование постоянного напряжения (тока) на выходе ССТ осуществляется за счет переключения отпаек в выпрямительном трансформаторе (ВТ) и регулирования переменного напряжения между отпайками с помощью РН на стороне высокого напряжения. В работе предложена система управления РН, позволяющая автоматически переключать отпайки ВТ с возможностью плавного регулирования переменного напряжения в синфазном и противофазном режимах между отпайками, что позволяет уменьшить мощность РН в два раза и, как следствие, его стоимость. Предложенная система также компенсирует высшие гармоники напряжения на выходе РН, вызванные нелинейным входным током 12-пульсного диодного выпрямителя, что способствует улучшению качества питающего напряжения. Эффективность системы стабилизации тока на основе РН с ВДТ подтверждена при помощи компьютерного моделирования в среде MATLAB + Simulink при сравнении результатов с широко применяемой в промышленности ССТ, в которой регулирование постоянного напряжения осуществляется за счет фазового управления тиристорами или дросселями насыщения совместно с переключением отпаек ВТ на первичной стороне. Приведены экспериментальные зависимости tgφ, коэффициента мощности и гармонических искажений сетевого тока и напряжения в зависимости от глубины регулирования 12-пульсного выпрямителя в ения без снятия возбуждения (ПБВ-1) в ВТ....

10 May 2025 in Energies
Verified
Journal Article
Open access
PDF file
ASAleksandr N. Shishkov
Aleksandr N. Shishkov
MDMaksim Dudkin
Maksim Dudkin
Alexandr S. MaklakovAlexandr S. Maklakov
Alexandr S. Maklakov
LCLe Van Canh
Le Van Canh
ARAndrey A. Radionov
Andrey A. Radionov
VBVlada S. Balabanova
Vlada S. Balabanova
The main purpose of this research is to develop an improved space vector pulse-width modulation (SVPWM) algorithm for three-level (3L) neutral point clamped (NPC) voltage source inverters (VSIs). The results of experiments conducted on the three-level power converter laboratory setup showed that the proposed SVPWM algorithm with a seven-stage switching sequence (SS) can reduce a VSI’s switching frequency by 43.48% compared to the SVPWM algorithm with the base SS. It also improves the neutral point (NP) voltage balance in the VSI DC link by 4.2% by controlling the duty factor of distributed base vectors in each SVPWM period based on phase load currents. It reduced the values of the 5th- and 7th-order harmonics of the VSI output voltage by 19% and 15.7%, respectively. The results show that the usage of the improved SVPWM algorithm helps increase the efficiency of a 3L NPC VSI by 0.6% and reduce the higher harmonics. The obtained results confirm the efficiency of the suggested algorithm and its great potential for power converters in industry.

1 January 2018 in Bulletin of the South Ural State University Series "Power Engineering"
Verified
Journal Article
Open access
PDF file
MDMaksim Dudkin
Maksim Dudkin
ЮУЮрий Семенович Усынин
Юрий Семенович Усынин
Osintsev KonstantinOsintsev Konstantin
Osintsev Konstantin
Адаптивное интегрирующее устройство синхронизации для систем управления силовыми вентильными преобразователям

21 March 2026 in Izvestia MGTU MAMI
Verified
Journal Article
Open access
PDF file
Evgeny SolominEvgeny Solomin
Evgeny Solomin
Osintsev KonstantinOsintsev Konstantin
Osintsev Konstantin
ALAndrey Anatolyevich Lisov
Andrey Anatolyevich Lisov
AMAndrey Martyanov
Andrey Martyanov
NPNikita Pshenisnov
Nikita Pshenisnov
Sergey GandzhaSergey Gandzha
Sergey Gandzha
The paper is a scientific review of unmanned aircraft systems (unmanned aerial vehicles, or drones) specializing in various types of cargo transportation. The development of the use of unmanned aircraft systems in postal and cargo logistics is presented, the main requirements of legal regulation and infrastructural requirements for the operation of drones are given, the influence of external factors and the social aspects of drone operation are described. An analysis of their practical application in various industries is given: agriculture and forestry, fisheries, wildlife protection, various types of environmental monitoring (including air quality control), mining, defense and civilian sectors, space industry, as well as during search and rescue missions. The tasks of Arctic exploration using drones are highlighted. The paper includes a historical review of the development of unmanned technologies, a description of Russian and international standards, classifications and categories of unmanned aircraft systems. In addition, the key advantages and limitations of unmanned systems are disclosed, as well as specific problems associated with the mail delivery by drones. The prospects of using unmanned vehicles are given. The main stages of scientific and technical development of unmanned systems are given. Unmanned aerial vehicles continue to evolve, and the next paper will cover the classification and development process of unmanned aerial vehicles.