The intelligent use of deep learning (DL) techniques can assist in overcoming noise and uncertainty during fingerprinting-based localization. With the rise in the available computational power on mobile devices, it is now possible to employ DL techniques, such as convolutional neural networks (CNNs), for smartphones. In this paper, we introduce a CNN model based on received signal strength indicator (RSSI) fingerprint datasets and compare it with different CNN application models, such as AlexNet, ResNet, ZFNet, Inception v3, and MobileNet v2, for indoor localization. The experimental results show that the proposed CNN model can achieve a test accuracy of 94.45% and an average location error as low as 1.44 m. Therefore, our CNN model outperforms conventional CNN applications for RSSI-based indoor positioning.
In this paper, we propose two data augmentation schemes for deep learning architecture that can be used to directly estimate user location in an indoor environment using mobile phone tracking and electronic fingerprints based on reference points and access points. Using a pretrained model, the deep learning approach can significantly reduce data collection time, while the runtime is also significantly reduced. Numerical results indicate that an augmented training database containing seven days’ worth of measurements is sufficient to generate acceptable performance using a pretrained model. Experimental results find that the proposed augmentation schemes can achieve a test accuracy of 89.73% and an average location error that is as low as 2.54 m. Therefore, the proposed schemes demonstrate the feasibility of data augmentation using a deep neural network (DNN)-based indoor localization system that lowers the complexity required for use on mobile devices.
Recently, deep-learning-based indoor localisation systems have attracted attention owing to their higher performance compared with traditional indoor localization systems. However, to achieve satisfactory performance, the former systems require large amounts of data to train deep learning models. Since obtaining the data is usually a tedious task, this requirement deters the use of deep learning approaches. To address this problem, we propose an improved data augmentation technique based on received signal strength indication (RSSI) values for fingerprint indoor positioning systems. The technique is implemented using available RSSI values at one reference point, and unlike existing techniques, it mimics the constantly varying RSSI signals. With this technique, the proposed method achieves a test accuracy of 95.26% in the laboratory simulation and 94.59% in a real-time environment, and the average location error is as low as 1.45 and 1.60 m, respectively. The method exhibits higher performance compared with an existing augmentation method. In particular, the data augmentation technique can be applied irrespective of the positioning algorithm used.
Wi-Fi-based indoor positioning systems have a simple layout and a low cost, and they have gradually become popular in both academia and industry. However, due to the poor stability of Wi-Fi signals, it is difficult to accurately decide the position based on a received signal strength indicator (RSSI) by using a traditional dataset and a deep learning classifier. To overcome this difficulty, we present a clustering-based noise elimination scheme (CNES) for RSSI-based datasets. The scheme facilitates the region-based clustering of RSSIs through density-based spatial clustering of applications with noise. In this scheme, the RSSI-based dataset is preprocessed and noise samples are removed by CNES. This experiment was carried out in a dynamic environment, and we evaluated the lab simulation results of CNES using deep learning classifiers. The results showed that applying CNES to the test database to eliminate noise will increase the success probability of fingerprint location. The lab simulation results show that after using CNES, the average positioning accuracy of margin-zero (zero-meter error), margin-one (two-meter error), and margin-two (four-meter error) in the database increased by 17.78%, 7.24%, and 4.75%, respectively. We evaluated the simulation results with a real time testing experiment, where the result showed that CNES improved the average positioning accuracy to 22.43%, 9.15%, and 5.21% for margin-zero, margin-one, and margin-two error, respectively.
With the rapid development of future wireless networks, device-to-device (D2D) technology is widely used as the communication system in the Internet of Things (IoT) fifth generation (5G) network. The IoT 5G network based on D2D communication technology provides pervasive intelligent applications. However, to realize this reliable technology, several issues need to be critically addressed. Firstly, the device’s energy is constrained during its vital operations due to limited battery power; thereby, the connectivity will suffer from link failures when the device’s energy is exhausted. Similarly, the device’s mobility alters the network topology in an arbitrary manner, which affects the stability of established routes. Meanwhile, traffic congestion occurs in the network due to the backlog packet in the queue of devices. This paper presents a Mobility, Battery, and Queue length Multipath-Aware (MBMQA) routing scheme for the IoT 5G network based on D2D communication to cope with these key challenges. The back-pressure algorithm strategy is employed to divert packet flow and illuminate the device selection’s estimated value. Furthermore, a Multiple-Attributes Route Selection (MARS) metric is applied for the optimal route selection with load balancing in the D2D-based IoT 5G network. Overall, the obtained simulation results demonstrate that the proposed MBMQA routing scheme significantly improves the network performance and quality of service (QoS) as compared with the other existing routing schemes.