Vu Thai Son

Mr. Vu Thai Son

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 June 2025 in Aerospace
Verified
Journal Article
Open access
PDF file
Quan Hoang CHUQuan Hoang CHU
Quan Hoang CHU
QDQuang Ngoc Dinh
Quang Ngoc Dinh
Vu Thai SonVu Thai Son
Vu Thai Son
VPVan-Yen Pham
Van-Yen Pham
VBVan-Trung Bui
Van-Trung Bui
CDCong-Truong Dinh
Cong-Truong Dinh
Electric ducted fans are gaining prominence in aviation due to their compact size, low noise, and zero emissions compared to conventional gas turbines. This study presents an experimental test system for a 390 mm electric Ducted Propulsion Fan developed by the Aerospace Propulsion Systems group at Hanoi University of Science and Technology. The carbon fiber composite thruster, driven by a centrally located BLDC motor, was mounted on a test stand equipped with force and rotational speed (rpm) sensors. Power was supplied through two battery configurations, eight-pack and nine-pack, with voltage and current monitored and controlled via an ESC module. Experiments conducted from 2000 to 7000 rpm explored the relationship between electrical inputs and aero-propulsive outputs. The results revealed that input power, current, and sound pressure level (SPL) amplified meaningfully with rpm, while the voltage slightly declined. The maximum rpm reached 6500 rpm for the eight-pack and 7000 rpm for the nine-pack configurations. When greater than 6000 rpm, the SPL reaches close to 120 dB. The eight-pack configuration provided higher thrust per volt, whereas the nine-pack offered better thrust per ampere and improved starting power. Although dimensionless indices, including power coefficient (CP), thrust coefficient (CT), and figure of merit (FM), reduced with rpm, the FM remained between 0.7 and 0.75 at medium speeds, demonstrating effective energy conversion.

22 April 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
Quan Hoang CHUQuan Hoang CHU
Quan Hoang CHU
QDQuang Ngoc Dinh
Quang Ngoc Dinh
Vu Thai SonVu Thai Son
Vu Thai Son
VPVan-Yen Pham
Van-Yen Pham
VBVan-Trung Bui
Van-Trung Bui
CDCong-Truong Dinh
Cong-Truong Dinh
Electric ducted fans are increasingly being applied in the aviation sector due to their advantages in compact size, low noise, and zero emissions when compared to conventional gas turbine engines. This paper presents a test system for an electric Ducted Propulsion Fan (eDPF) developed by the Aerospace Propulsion Systems group at the School of Mechanical Engineering, Hanoi University of Science and Technology, Vietnam. The core component of the experimental system is a 390 mm diameter eDPF, made of carbon fiber composite and driven by a BLDC electric motor located within the fan core. The eDPF is mounted on a test stand equipped with force sensors and an optical RPM sensor, which are connected to digital display gauges. The power supply consists of LiFePO₄ battery packs, with voltage and current monitored by multimeters and controlled via a potentiometer connected to an ESC module. This electric thruster was experimentally operated at rotational speeds ranging from 2000 rpm to 7000 rpm in order to establish the relationship between its electrical and aero-propulsion characteristics. Initially, the testing aimed to determine the operational thrust range of the eDPF. Subsequently, comparisons were made between the electrical and aero-propulsion performance, as well as dimensionless parameters—including power coefficient (CP), thrust coefficient (CT), and figure of merit (FM)—under two configurations: 8-pack and 9-pack battery setups. In addition, an acoustic test was performed to measure the sound pressure level (SPL) at a distance of 1.0 m. The experimental results provide insights and recommendations for operating the eDPF at different power levels to achieve optimal thrust efficiency.

3 August 2025
Verified
Book Chapter
Closed access
PDF file
Vu Thai SonVu Thai Son
Vu Thai Son
DHDang-Thang Ha
Dang-Thang Ha
QNQuoc-Viet Nguyen
Quoc-Viet Nguyen
GPGia-Diem Pham
Gia-Diem Pham
CDCong-Truong Dinh
Cong-Truong Dinh


27 April 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
Vu Thai SonVu Thai Son
Vu Thai Son
NNNguyen Binh Nguyen
Nguyen Binh Nguyen
Quan Hoang CHUQuan Hoang CHU
Quan Hoang CHU
GPGia-Diem Pham
Gia-Diem Pham
CDCong-Truong Dinh
Cong-Truong Dinh
Today, the aviation industry is transitioning from fossil fuel to renewable energy. Re-newable energy systems have advantages, such as cleanliness and reduced emissions, but also face limitations in battery energy density and aerodynamic performance dur-ing operation. Therefore, electric ducted propulsion fans (eDPFs) are a promising so-lution that uses duct components to enhance aerodynamic efficiency and operational safety. This study utilizes average Navier-Stokes analysis, incorporating Reynolds numbers and a k-ω SST turbulence model, to examine eDPF configurations both with and without a secondary air intake channel, concentrating on internal flow dynamics and aerodynamic efficiency. The air intake channel, which is located close to the tip of the rotor blade, helps the eDPF move more mass and create more thrust. Several dif-ferent configurations of the secondary air intake channel were tested by varying the intake channel position, curvature, and size of the inlet and outlet ports under static conditions at 6000 rpm. The best design improved thrust by an additional 2.2% com-pared to the baseline case without the auxiliary intake port

30 September 2026 in International Journal of Marine Science and Technology
Verified
Journal Article
Open access
PDF file
Vu Thai SonVu Thai Son
Vu Thai Son
NNNguyen Binh Nguyen
Nguyen Binh Nguyen
Quan Hoang CHUQuan Hoang CHU
Quan Hoang CHU
CDCong-Truong Dinh
Cong-Truong Dinh
Electric ducted propulsion fans (EDPFs) have become a key propulsion technology for next–generation electric aircraft, urban air mobility (UAM) vehicles, and unmanned aerial systems, offering high propulsive efficiency, a compact configuration, and reduced noise emissions. This study presents both numerical and experimental performance evaluations of an EDPF with a rotational speed range from 2,000 to 7,000 rpm. The aerodynamic thrust and torque performance of an EDPF were evaluated using 3D Reynolds–Averaged Navier–Stokes (RANS) simulations with the SST k–ω turbulence model and subsequently validated against experiment. The results showed that the maximum difference between the numerical and experimental thrust at 6,000 rpm was very small with only 0.86%. The peak efficiency of the EDPF reaches 93% at 7,000 rpm. These numerical and experimental results confirm the accuracy of the computational model with RANS and demonstrate its applicability in the performance analysis and optimization of EDPF. With this design, it could be used as a propulsion system for unmanned surface vehicles (USVs) if the rotating drive mechanism is driven by a drive shaft or the electric motor can operate in a water environment.