Ultrasonic curing is an effective way to enhance the curing extent of composite material bonding in the aerospace industry. The non-thermal effect of ultrasonic has been revealed to improve curing efficiency. However, the mechanism of the ultrasonic non-thermal effect is still not clear. In this work, a variable activation energy model of ultrasonic curing was established by utilizing the iso-conversional method, including the activation energy of the thermal effect and activation energy of the non-thermal effect. The thermal effect caused by ultrasonic was accurately peeled off. An obvious decrease in activation energy was found from 54 kJ/mol in thermal curing to 38 kJ/mol in ultrasonic curing. The activation energy of the reaction system in ultrasonic curing was substituted into the modified Kamal autocatalytic equation, and the parameters of the ultrasonic curing kinetic model were estimated by means of an ALO algorithm. Further discussion based on in situ FTIR showed that the non-thermal effect of ultrasonic can affect the vibration strength, stability, and chemical bond energy of internal groups, but cannot cause the fracture of chemical bonds. Moreover, frontier molecular orbital analysis showed that the chemical reactivity of epoxy/amine molecules increased and the HOMO–LUMO energy gap decreased from 6.511 eV to 5.617 eV under the effect of ultrasonic.
The surface microstructure formed by physical or chemical modification is essential for the desired joint strength. However, defects in the bonding interface and adhesive can be found. Such defects decrease shear strength and durability. In this study, ultrasonic vibration was applied to liquid adhesive on the sandblasted aluminum alloy plates. With ultrasonic treatment, the joints obtained the compact bonding interfaces and lower porosity of the adhesive layer. The treatment improved the shear strength by 9.1%. After two weeks of hydrothermal aging, the shear strength of joints only sandblasted decreased drastically by 48.9%, while it was 14% for the joints with ultrasonic vibration. The cavitation effect in the adhesive was detected by the aluminum foil erosion method. The result showed that a great number of micro-jets generated by the cavitation effect have intensive impact on the bonding interface which provide the adhesive with powerful force to fill the micro-grooves. Another finding in this work is that bubbles were gathered in the adhesive away from the vibration area. This mechanism was successfully used to reduce the porosity of the adhesive layer of joints.
The benefits of co-integrating sensors and electronics are well known, yet many biosensors require post-processing to realize sensor or actuator structures above CMOS integrated circuits. This is typically accomplished with Electron Beam Lithography (EBL) for patterning small geometry features. However, the optical alignment with respect to the on-chip alignment marks heavily affects the precision of such patterning. Moreover, high-energy electrons can damage the underlying transistor circuits, resulting in performance degradation. This paper investigates how to design the alignment marks for robust EBL pattern-transferring and the degradation effect and affected area of EBL patterning on CMOS transistors. Results show that the different device types (PMOS, NMOS, thick-oxide, thin-oxide) can be affected to different degrees by EBL, and while metal shielding offers no mitigation for such degradation, an efficient technique is to avoid a "blast radius" of 60 μm around the EBL site for circuit protection.
The interface between the body and recovery insulation in factory joints is susceptible to localized electromechanical weaknesses, potentially compromising the long-term reliability of high-voltage direct current (HVDC) submarine cable systems. This study introduces ultrasonic vibration into the insulation recovery process of these joints. The effects of ultrasonic treatment are evaluated through tensile tests, thermal elongation tests, DC breakdown tests, and space-charge characterization. Results demonstrate that ultrasonic treatment significantly enhances interfacial tensile properties, improves deformation stability under thermal loading, increases the DC breakdown strength of the insulation interface, and significantly suppresses negative space-charge accumulation. These improvements are attributed to the high-frequency acoustic pressure and localized temperature rise induced by ultrasonic vibration, which promote molecular-chain melting and rearrangement, thereby reducing microscopic defects. This study provides an innovative method for the insulation recovery forming process in factory joints to improve interfacial reliability.
1 June 2022 in Journal of Physics: Conference Series
We propose a miniature FBG(Fiber Bragg Grating) interrogation based on the LVF(Linear Variable Fliter ), which is very suitable for measurements in aircraft because of its small size, light weight and vibration insensitivity compared to conventional interrogation. We analyzed the relationship between the performance of the interrogation and the optical properties of the LVF by simulating the light passing through the LVF demodulator by means of theoretical simulations before the actual construction of the instrument, and we also find that the inhomogeneous illumination of the incident light can impair the performance of the interrogation.