The article discusses the impact of surface emissivity on thermograms, obtained from a thermal imaging camera during measurements of construction objects. The study is carried out as an analysis of digital and thermal images for three selected materials types of building finishing such as: wood...
1 September 2021 in Advances in Science and Technology Research Journal
In this paper, the authors made attempt to analyse the influence of moisture in the external wall of a building on the distribution of the temperature field, using numerical and experimental methods. Studies were carried out in the places of heat leakage occurring in structural joints of a...
1 June 2017 in Advances in Science and Technology Research Journal
The article discusses the impact of vertical partition, technology on thermal insulation of the building, and the resulting savings and residents thermal comfort. The study is carried out as an analysis of three selected design solutions including such materials as: aerated concrete elements,...
This study explores the application of materials used in 3D printing to manufacture the housings of non-invasive sensors employed in measurements using a TDR (Time Domain Reflectometry) meter. The research investigates whether sensors designed with 3D printing technology can serve as viable alternatives to conventional invasive and non-invasive sensors. This study focuses on innovative approaches to designing humidity sensors, utilizing Fused Deposition Modeling (FDM) technology to create housings for non-invasive sensors compatible with TDR devices. The paper discusses the use of 3D modeling technology in sensor design, with particular emphasis on materials used in 3D printing, notably polylactic acid (PLA). Environmental factors, such as moisture in building materials, are characterized, and the need for dedicated sensor designs is highlighted. The software utilized in the 3D modeling and printing processes is also described. The Materials and Methods Section provides a detailed account of the construction process for the non-invasive sensor housing and the preparation for moisture measurement in silicate materials using the designed sensor. A prototype sensor was successfully fabricated through 3D printing. Using the designed sensor, measurements were conducted on silicate samples soaked in aqueous solutions with water absorption levels ranging from 0% to 10%. Experimental validation involved testing silicate samples with the prototype sensor to evaluate its effectiveness. The electrical permittivity of the material was calculated, and the root-mean-square error (RMSE) was determined using classical computational methods and machine learning techniques. The RMSE obtained using the classical method was 0.70. The results obtained were further analyzed using machine learning models, including Gaussian Process Regression (GPR) and Support Vector Machine (SVM). The GPR model achieved an RMSE of 0.15, while the SVM model yielded an RMSE of 0.25. These findings confirm the sensor’s effectiveness and its potential for further research and practical applications.
1 November 2022 in Advances in Science and Technology Research Journal
The article focuses on the subject of 3D printing. 3D printing technology and currently used solutions are described. The materials used in printing with the use of a filament printer and a resin printer are discussed. The fused deposiotion modeling technique and the LCD-based stereolithography....
22 October 2024 in Advances in Science and Technology Research Journal
The paper demonstrates the challenges in accurately measured heat transport through multilayer walls, emphasizing the need for careful sensor placement and analysis to address potential anomalies and ensure reliable data. The study was conducted on a building constructed in 2010 for agricultural...