Bruno Santos Ferreira

Prof. Dr. Bruno Santos Ferreira

UNESP/ICE, Itapeva, São Paulo, Brazil
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 May 2019 in BioResources
Verified
Journal Article
Closed access
ESESTEFANI SUANA SUGAHARA
ESTEFANI SUANA SUGAHARA
Particleboards were made using particles from sugarcane bagasse and eucalyptus residues of the pulp industry. The particleboard properties were evaluated according to ABNT NBR 14810-1 (2013), ABNT NBR 14810-2 (2013), and ANSI A208.1 (1999) standards, which compared the efficiency of castor oil-based polyurethane resin (PU-Castor) and urea-formaldehyde resin (UF). The particleboards were composed of 60% wood particles and 40% bagasse, with a 10% adhesive dose based on the dry mass of particles. The following parameters were evaluated: apparent density, moisture content (MC), thickness swelling after 24 h, modulus of rupture (MOR), modulus of elasticity to static bending (MOE), and internal bond strength of panels (IB). The results obtained demonstrated the potential use of eucalyptus and sugarcane bagasse residues in the production of high-density particleboards. The panels produced with PU-Castor showed greater efficiency, and their physical and mechanical properties were compatible with the requirements of the Brazilian standard for P4 panels (structural panels for use in dry conditions) and the American standard for H-3 panels (high industrial density).
1

1 May 2017 in BioResources
Verified
Journal Article
Open access
PDF file
Bruno Santos FerreiraBruno Santos Ferreira
Bruno Santos Ferreira
JVJoão Vitor
João Vitor
FSFelippe Silva
Felippe Silva
CCCristiane Inácio de Campos
Cristiane Inácio de Campos
BFBruno Santos Ferreira
Bruno Santos Ferreira
Plywood can be used in the furniture industry and in civil construction due to its structural strength. However, for long useful life in construction, especially in tropical countries, it needs to undergo treatments against xylophagous organisms. The most common preservative treatment is the chemical chromated copper arsenate (CCA); there are alternatives, such as heat treatment, that do not use chemicals. The objective of this work was to evaluate the mechanical resistance of CCA and heat-treated plywood prepared at three different temperatures (160 °C, 180 °C, and 200 °C). Pinus taeda plywood with seven veneers and phenol-formaldehyde adhesive was produced and subjected to the preservative treatments. The results showed that the CCA treatment reduced the mechanical strength of the panels, while the heat treatment did not. Heat treatment also decreased panel hygroscopicity, indicating a better dimensional stability.

31 August 2022 in Forests
Verified
Journal Article
Open access
PDF file
Bruno Santos FerreiraBruno Santos Ferreira
Bruno Santos Ferreira
FAFelipe Nascimento Arroyo
Felipe Nascimento Arroyo
MKMarcel Yuzo Kondo
Marcel Yuzo Kondo
HSHerisson FERREIRA Santos
Herisson FERREIRA Santos
RBRogério Lima Barreto
Rogério Lima Barreto
CCCristiane Inácio de Campos
Cristiane Inácio de Campos
Plywood is a structural composite mainly applied in construction. For this purpose, some sort of preservative treatment is recommended to increase its durability. One option of the available treatments is heat treatment, which promotes the modification of the wood properties. This treatment is carried out on the final product (plywood), because it can reduce strength if applied to the veneers. However, no study has proven such a reduction. Therefore, the aim of this work was to evaluate three different temperatures (160 °C, 180 °C and 200 °C) of the heat treatment on the veneer surface and on the physical properties (specific gravity, moisture content and swelling in thickness) and mechanical properties (MOE and MOR in static bending) of Pinus taeda plywood. A reduction was observed in the roughness of the veneer’s surfaces and the total extractives content changed, with a minimum value reached in the 160 °C treatment. The plywood specific gravity initially increased with the heat treatment and did not change at higher temperatures, moisture content reduced, and thickness swelling was not affected. There was no change in the mechanical properties of the plywood, evidencing that the veneer heat treatment does not prejudice mechanically the final product.

5 August 2015 in BioResources
Verified
Journal Article
Open access
PDF file
Maristela GavaMaristela Gava
Maristela Gava
SMSarah David Müzel
Sarah David Müzel
LLLarissa Ribas De Lima
Larissa Ribas De Lima
JBJuliana Cortez Barbosa
Juliana Cortez Barbosa
JGJosé Nivaldo Garcia
José Nivaldo Garcia
Victor De AraujoVictor De Araujo
Victor De Araujo
Production of Particleboards from Hevea brasiliensis Clones and Castor Oil-based Polyurethane Resin

20 July 2022 in Forests
Verified
Journal Article
Open access
PDF file
ESESTEFANI SUANA SUGAHARA
ESTEFANI SUANA SUGAHARA
BCBruno Casagrande
Bruno Casagrande
FAFelipe Nascimento Arroyo
Felipe Nascimento Arroyo
Victor De AraujoVictor De Araujo
Victor De Araujo
HSHerisson FERREIRA Santos
Herisson FERREIRA Santos
CCCristiane Inácio de Campos
Cristiane Inácio de Campos
Plywood is widely used in civil construction. Due to the importance of preservation and gluing in bio-composites, this study compares the influence of a chemical treatment with CCA (chromated-copper-arsenate) on Pinus taeda L. wood veneers to produce two plywood types using phenol-formaldehyde (PF) and castor oil-based polyurethane (PU). Four different treatments were performed to analyze both varieties’ physical and mechanical properties. As a result, an improvement in the properties of the treated panels was observed. Lower moisture contents and better interactions caused by less thickness swelling and water absorption were identified in the PU-based plywoods. The treatment with CCA was efficient, improving these properties when they were compared to the reference panels. Most treatments evidenced increases in the modulus of elasticity and modulus of rupture for both adhesives when the CCA treatment was applied to the veneers. Comparing the resins, the PF showed the best values of modulus of elasticity. All treatments met the requirements defined by the Brazilian standard document for the glue line shear.

7 December 2022 in Forests
Verified
Journal Article
Open access
PDF file
ESESTEFANI SUANA SUGAHARA
ESTEFANI SUANA SUGAHARA
ADAndré Manuel Dias
André Manuel Dias
FAFelipe Nascimento Arroyo
Felipe Nascimento Arroyo
André Luis ChristoforoAndré Luis Christoforo
André Luis Christoforo
MCMichelle L. Costa
Michelle L. Costa
CCCristiane Inácio de Campos
Cristiane Inácio de Campos
In view of the lack of studies aimed at producing and assessing the effects of heat treatment of Oriented Strand Board (OSB) panels, this paper evaluated the thermal degradation kinetics of the raw materials, and the physical and mechanical properties of the panels made with eucalyptus wood and castor oil-based polyurethane adhesive. The OSB panels were subjected to post-production heat treatment (at 175 and 200 °C), replacing the use of wood chemical preservatives. Furthermore, the quantity of materials varied in the face:core:face layers in the proportions of 25:50:25 and 30:40:30, aiming to evaluate the possibility of structural applications for the panels. The results were statistically analyzed and compared with the specifications and classifications for OSB indicated by the European Standard EN 300 and the literature. The application of heat treatment improved the physical properties by decreasing the interaction with water and did not reduce the mechanical properties below the recommended levels. The variation in layer proportions indicated that all of them can be adopted without compromising the panel’s physical-mechanical performance. All treatments are compatible with the EN 300 classification for OSB/4 (heavy duty load-bearing boards for use in humid conditions), presenting technical feasibility and excellent structural profile for civil construction applications.