Muhammad Aulia Rahman

Mr. Muhammad Aulia Rahman

Gadjah Mada University, Yogyakarta, Indonesia
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 March 2022 in Energies
Verified
Journal Article
Open access
PDF file
IPIndro Pranoto
Indro Pranoto
MRMuhammad Aulia Rahman
Muhammad Aulia Rahman
PMPradhana A. P. Mahardhika
Pradhana A. P. Mahardhika
In this paper, an experimental study investigating the effect of the geometrical shape of the circular and rectangular pin fins on the heat transfer performance and the boiling phenomenon is presented. A pool boiling experiment in the HFE-7100 dielectric working fluid under atmospheric pressure was conducted. Boiling curves and boiling heat transfer coefficients of different test cases were plotted to evaluate the heat transfer performance as well as the captured images of the boiling phenomenon on the test samples. Two quantities, flow resistance and wetted perimeter, were calculated to understand the behaviour of the boiling physics due to variation of fin geometrical shape and, hence, their effect on the heat transfer performance. It was found that the cooling performance of the rectangular pin fins was higher than that of the circular pin fins, despite having a slightly higher flow resistance of 4% and 7%, respectively. This is believed to be the result of the longer wetted perimeter up to 27%, whereby the nucleation site has a higher probability of generating more bubbles in the same boiling surface area. For the tested modified boiling surface with 196 and 144 pin fins, the average heat transfer performances were found to have differences of up to 3.54 and 1.58 times larger, respectively.

8 July 2022 in Fluids
Verified
Journal Article
Open access
PDF file
IPIndro Pranoto
Indro Pranoto
MRMuhammad Aulia Rahman
Muhammad Aulia Rahman
JWJoko Waluyo
Joko Waluyo
Pool boiling surface modification by pin fin array has demonstrated a practical but effective cooling enhancement. Whilst the main challenge is to determine the best configuration of the pin fin dimensions and positioning, it is known that the result varies among the working conditions. To obtain a more general formulation, it is utterly vital to obtain a deep understanding of the pool boiling mechanism during the phase-change process. This study aimed to analyze the role of pin fin array configuration on the pool boiling phenomenon by generating visualization and non-dimensional analysis. The results illustrated three different regimes occurring during the boiling process: natural convection, isolated bubble, and merged bubble. For all regimes, the average heat transfer performance was enhanced as the fin gap rose to 17% and 63% for circular and rectangular pin fins, respectively. Furthermore, Grashof (Gr) and Bond (Bo) numbers were calculated to quantitatively describe the effect on the bubble dynamics. From these approaches, it was found that the insulated bubble regime provides a better means of cooling by around 60% due to the better bubble dynamics.

20 March 2023 in Fluids
Verified
Journal Article
Open access
PDF file
IPIndro Pranoto
Indro Pranoto
MRMuhammad Aulia Rahman
Muhammad Aulia Rahman
CWCahya Dhika Wicaksana
Cahya Dhika Wicaksana
AWAlan Eksi Wibisono
Alan Eksi Wibisono
FFFauzun Fauzun
Fauzun Fauzun
AWArif Widyatama
Arif Widyatama
The trend of miniaturisation in recent decades has led to the development of compact electronic devices. The reduction in the required dimension leads to the exponential rise in the heat flux dissipated from such a system. A proper thermal management system is necessary to keep the temperature of a computer chip’s junction within acceptable limits and maintain its performance. Flow boiling modification using straight fins in microchannels has proven to be an effective passive enhancement of the cooling system. The core interest of this research is figuring out the optimal configuration of the fin shapes and configurations. Hence, it is crucial to gain a comprehensive understanding of the flow boiling phenomenon to establish a more general approach. In this study, the boiling heat transfer performance of fin microchannels with various shapes and dimensions is investigated experimentally. The study has shown that the choice of fin geometry has a significant impact on the thermal performance of a heat transfer system. Specifically, the results indicate that a rectangular cross-section fin performs better than a trapezoidal one with the same fin gap. The rectangular cross-section fin exhibits the highest heat transfer coefficient of 5066.84 W/m2∙K, outperforming the trapezoidal fin in terms of heat transfer capability. As the hydraulic diameter reduces, the thermal boundary layer becomes denser, providing a more distributed saturated region. This leads to the increase in the heat transfer coefficient up to 22.5% and 17.1% for rectangular and trapezoidal fins, respectively. Additionally, the efficiency analysis shows that, albeit increasing the mass flux and reducing the gap increase the average cooling performance, but the pressure drop jumps up to 48%, reducing the efficiency of the heat removal system.

26 April 2024 in Applied Mechanics and Materials
Verified
Journal Article
Closed access
PDF file
MHMuhammad Raihan Hilmy
Muhammad Raihan Hilmy
MRMuhammad Aulia Rahman
Muhammad Aulia Rahman
IPIndro Pranoto
Indro Pranoto
KKKhasani Khasani
Khasani Khasani
JWJoko Waluyo
Joko Waluyo
The battery remains the primary choice of energy and power storage in electric vehicles. To optimize battery performance, manufacturers have developed various technologies, including the battery thermal management system (BTMS). In this study, an experimental investigation was conducted to determine the cooling performance and characteristics of a liquid cold plate cooling system for 18650 lithium-ion battery. The testing involved an 18650 SONY 2100 mAh lithium-ion battery and a 400 W DC Load Tester. Testing was carried out by discharging the battery module and taking data on battery temperature and working fluid temperature to get the heat transfer coefficient. The discharge current varied at 1.25 C, 1.5 C, 1.75 C, and 2 C, while the flow rate was set at 0.2 LPM, 0.5 LPM, and 0.8 LPM. The results indicate that the cooling rate increases as the flow rate rises. The battery temperature rises quicker near the negative pole than at the further location. Furthermore, the pressure drop on the liquid cold plate increases as the flow rate rises, while the highest heat transfer coefficient to pressure drop ratio is observed at 0.2 LPM.

1 July 2019
Verified
Conference Paper
Closed access
MRMuhammad Aulia Rahman
Muhammad Aulia Rahman
AWArif Widyatama
Arif Widyatama
AMAkmal Irfan Majid
Akmal Irfan Majid
SSSuhanan Suhanan
Suhanan Suhanan
Indonesia is a maritime country with many traditional fishermen still relies on land-based cold storage. While there is a limitation of space and energy consumption in the most fishermen’s vessel, conventional vapor compression cycle cannot be used. Thus, thermoelectric based cold storage is a promising way to overwhelm that problem. However, the Coefficient of Performance (CoP) of that system is currently much lower than the conventional vapor compression cycle. Many researches have been developed in order to increase the efficiency of this system. This report addresses the current development of a suitable thermoelectric cold storage system as well as the trend of research objective, method, and the forecast of thermoelectric cold storage research in the future.

3 December 2025 in Franklin Open
Verified
Journal Article
Open access
BSBenny Susanto
Benny Susanto
WSWangi Sari
Wangi Sari
AWAdhika Widyaparaga
Adhika Widyaparaga
SRSyahirul Alim Ritonga
Syahirul Alim Ritonga
MRMuhammad Aulia Rahman
Muhammad Aulia Rahman
III. Indarto
I. Indarto