Increasing the average power of broadband, few-cycle terahertz (THz) sources is currently a topic of intense investigation, fueled by recent immense progress in high average power femtosecond laser driving sources at 1030 nm. However, many crucial applications would benefit not only from an increase in average power, but also from ultra-broad bandwidth, while maintaining high dynamic range at these frequencies. This calls for the challenging combination of high repetition rates and high average power simultaneously. Here, we discuss the recent progress in the promising approach enabled by organic crystals for THz-generation. Specifically, this review article discusses advances with the most commonly used organic crystals BNA, DAST, DSTMS, OH1 and HMQ-TMS. We place special emphasis on nonlinear and thermal properties and discuss future directions for this field.
Metallic spintronic terahertz (THz) emitters have become well-established for offering ultra-broadband, gapless THz emission in a variety of excitation regimes, in combination with reliable fabrication and excellent scalability. However, so far, their potential for high-average-power excitation to reach strong THz fields at high repetition rates has not been thoroughly investigated. In this article, we explore the power scaling behavior of tri-layer spintronic emitters using an Yb-fiber excitation source, delivering an average power of 18.5 W (7 W incident on the emitter after chopping) at 400 kHz repetition rate, temporally compressed to a pulse duration of 27 fs. We confirm that a reflection geometry with back-side cooling is ideally suited for these emitters in the high-average-power excitation regime. In order to understand limiting mechanisms, we disentangle the effects on THz power generation by average power and pulse energy by varying the repetition rate of the laser. Our results show that the conversion efficiency is predominantly determined by the incident fluence in this high-average-power, high-repetition-rate excitation regime if the emitters are efficiently cooled. Using these findings, we optimize the conversion efficiency and reach highest excitation powers in the back-cooled reflection geometry. Our findings provide guidelines for scaling the power of THz radiation emitted by spintronic emitters to the milliwatt-level by using state-of-the-art femtosecond sources with multi-hundred-Watt average power to reach ultra-broadband, strong-field THz sources with high repetition rate.
We demonstrate a 13.3 MHz repetition rate, broadband THz source with milliwatt- average power, obtained by collinear optical rectification of a high-power Yb-doped thin-disk laser in the organic crystal BNA (N-benzyl-2-methyl-4-nitroaniline). Our source reaches a maximum THz average power of 0.95 mW with an optical-to-THz efficiency of 4×10−4 and a spectral bandwidth spanning up to 6 THz at -50 dB, driven by 2.4 W average power (after an optical chopper with duty cycle of 10%), 85 fs-pulses. This high average power excitation was possible without damaging the crystal by using a diamond-heatsinked crystal with significantly improved thermal properties. To the best of our knowledge, this result represents the highest THz average power reported so far using the commercially available organic crystal BNA, showing the potential of these crystals for high average power, high repetition rate femtosecond excitation. The combination of high power, high dynamic range, high repetition rate and broadband spectrum makes the demonstrated THz source highly attractive to improve various time-domain spectroscopy applications. Furthermore, we present a first exploration of the thermal behavior of BNA in this excitation regime, showing that thermal effects are the main limitation in average power scaling in these crystals.
We demonstrate efficient optical rectification in the organic crystal BNA (N-benzyl-2-methyl-4-nitroaniline), driven by a temporally compressed, commercially available industrial Yb-laser system operating at a 540 kHz repetition rate. Our terahertz (THz) source reaches 5.6 mW of THz average power driven by 4.7 W, 45 fs pulses, and the resulting THz-time domain spectroscopy combines a very broad bandwidth of 7.5 THz and a high dynamic range of 75 dB (in a measurement time of 70 s). The conversion efficiency at maximum THz power is 0.12%. To the best of our knowledge, this is the highest THz power so far demonstrated with BNA, achieved at a high repetition rate and enabling to demonstrate a unique combination of bandwidth and dynamic range for THz-spectroscopy applications.
We present the highest, to the best of our knowledge, average power from a laser-driven single-cycle THz source demonstrated so far, using optical rectification in the tilted pulse front geometry in cryogenically cooled lithium niobate, pumped by a commercially available 500 W ultrafast thin-disk ytterbium (Yb) amplifier. We study repetition rate-dependent effects in our setup at 100 and 40 kHz at this high average power, revealing different optimal fluence conditions for efficient conversion. The demonstrated sources with multi-100 mW average power at these high repetition rates combine high THz pulse energies and high repetition rate and are thus ideally suited for nonlinear THz spectroscopy experiments with significantly reduced measurement times. The presented result is a first benchmark for high average power THz time-domain spectroscopy systems for nonlinear spectroscopy, driven by very high average power ultrafast Yb lasers.
Ultrafast laser driven, single-cycle THz pulsed sources hold immense potential for scientific and industrial applications; however, their limited average power hinders their widespread application. In particular, applications where high repetition rates in the multi-MHz region and beyond are required are more severely affected, due to the lower pulse energies available for frequency conversion. In this respect, resonant enhancement both in passive and active resonators is a well-known technique for boosting the efficiency of nonlinear frequency conversion; however, this route has remained poorly explored for the generation of broadband THz pulses due to the inadequacy of typically employed nonlinear crystals. Here, we demonstrate that using thin lithium niobate crystals inside multimode diode-pumped mode-locked thin-disk lasers is a promising platform to circumvent these difficulties. Using a 50 µm thin lithium niobate plate intracavity of a compact high-power mode-locked thin-disk laser, we generate milliwatt-level broadband THz pulses with a spectrum extending up to 3 THz at 44.8 MHz repetition rate, driven by 264 W of intracavity average power. This approach opens the door to efficient high-power single-cycle THz generation using affordable nonlinear crystals at very high repetition rates, scalable to kilowatt-level driving power with low cost and complexity.