13 January 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
In this brief we propose a technique to compensate the distortion of an open-loop VCO-based ADC. The VCO is linearized by placing an analog feedback loop based on a frequency-to-current converter which uses an asynchronous switched capacitor circuit. The feedback loop relies on the VCO gain to linearize the ADC without requiring additional amplifiers. This permits the use of a ring oscillator with small input range to efficiently encode a large signal. The proposed technique has been experimentally demonstrated in an audio ADC. The proof-of-concept chip was fabricated in 130nm CMOS and achieves 76.64 dBA of peak SNDR with a Dynamic Range of 90dB and a power consumption of 482 $\mu \text{W}$ in 20kHz.
15 November 2018 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper presents a novel approach to analyze clock jitter influence in the performance of continuous-time sigma-delta modulators. The analysis is based on projecting all the signals and operations over an artificial time-base relative to the sampling clock, on which the sampling period can be considered constant. In the proposed time-base, clock jitter can be modeled as the modulation of the input signal frequency and the integrators gain. Unlike standard techniques, we do not rely on the feedback pulse properties, which enables a broader application of our technique to band-pass or VCO-based Σ Δ modulators. In this paper, we present the basic theory of this technique and its application to some practical examples, showing a good matching between prediction and numerical simulation.
6 January 2025 in IEEE Transactions on Circuits and Systems I: Regular Papers
One of the limitations of conventional VCO-ADCs is the restriction to first-order noise shaping. True VCO-ADC architectures have been proposed to increase the noise-shaping order by cascading several VCO integrators, but without requiring analog feedback loops. A high noise-shaping order allows to reduce the input VCO frequency compared to a conventional VCO-ADC with similar dynamic range, which improves power consumption. Prior-art True VCO-ADC architectures represent state variables either with a unity-weighted code or with a single-bit. Unity-weighted encoding is a natural choice when ring oscillators are selected as loop filter integrators. However, chip area restrictions force unity-weighted state variables to have few levels. A reduced number of levels in the state variables limits the dynamic range of True VCO-ADCs. In this paper, we experimentally demonstrate a second-order audio VCO-based ADC that uses ring oscillators as integrators but employs Gray and binary encoded state variables. As a consequence, the complexity and area of the True VCO-ADC architecture is reduced, breaking the barrier that limits the dynamic range of prior designs. The proof-of-concept chip shows a dynamic range of 103 dB achieving a peak SNDR of 76.5 dB-A with a power of 250 $\mu$ W occupying 0.095 $\text{mm}^2$ in 130 nm CMOS.
15 May 2024 in IEEE Circuits and Systems Magazine
The fact that VCO-ADCs produce noise-shaped quantization noise suggests that a link between frequency modulation and Sigma-Delta modulation should exist. The connection between a VCO-ADC and a first-order Sigma-Delta modulator has been already explained using Pulse Frequency Modulation. In this article, we attempt to extend this explanation to a generic Sigma-Delta modulator. We show that the link between Sigma-Delta modulation and Pulse Frequency Modulation relies in a sampling invariance property that defines the equivalence between both entities. This equivalence property, allows to go beyond the white quantization noise model of a Sigma-Delta modulator, revealing the origin of some nonlinear phenomena. We first predict spurious tones which cannot be explained by circuit non linearity. Multi-bit and single-bit modulators are shown to belong to a same generic class of systems. Finally, quantizer overload is analyzed using our model. The results are applied to Continuous-Time Sigma-Delta modulators of orders one, two and three and then extended to a generic case.
9 November 2022 in IEEE Transactions on Circuits and Systems II: Express Briefs
The most common implementation of a VCO-based ADC consists of a ring oscillator connected to a thermometer-encoded frequency-to-digital converter. The area of the frequency-to-digital converter depends linearly on the ring oscillator number of taps. In this paper, we show a new frequency-to-digital converter which directly provides a Gray-encoded binary output from the ring oscillator signals. This implementation reduces the digital hardware area in a logarithmic factor keeping the same metastability robustness than the thermometric frequency-to-digital converter. Direct binary coding may simplify data compression and transfer in area-constrained multi-channel instrumentation systems such as neural probes. We show the basic system level structure along with a practical example with circuit simulations in 0.13um CMOS technology.