The qualification of production systems that enable reliable and stable production processes is a major challenge in manufacturing large-format lithium-ion batteries. During cell assembly, the electrode sheets of the anode and the cathode are stacked, and are electrically contacted by a welding process. It was shown that laser beam welding employing a beam source in the green wavelength range is a promising joining approach in terms of high productivity. Therefore, the influence of the process parameters, such as the laser power, the welding speed, the pulse frequency, and the pulse duration, on the weld seam quality was investigated. Particular emphasis was placed on the mechanical strength of the weld seam. Statistically planned experiments were used to determine feasible parameter sets for welding the most common current collectors of lithium-ion battery electrodes, copper (Cu), and aluminum (Al). The influence of the individual process parameters on the tensile shear force was evaluated. Stacks of 40 metal foils were welded with a thin metal sheet in lap joint configuration. Based on an analysis of the requirements for minimum mechanical seam strengths, this study confirms that laser beam welding using a green high-power disk source is an auspicious process for the internal contacting of lithium-ion batteries.
30 October 2023 in Materials Science and Engineering: A
Considering the growing need for extensive energy storage solutions in smart grid technologies and affordable options for entry-level electric vehicles, sodium-ion batteries offer a promising alternative. They use raw materials that are cheaper, less toxic, and more abundant than those used in lithium-ion batteries, making them especially suitable for large-scale applications. This study comprehensively investigated four commercially available sodium-ion batteries to examine their structural and electrochemical characteristics. The cells were dissected, and the electrode dimensions, the areal mass loadings, and the material compositions were analyzed using scanning electron microscopy, energy-dispersive X-ray spectroscopy, powder X-ray diffraction, and attenuated total reflection Fourier-transform infrared spectroscopy. Electrical characterization, including electrochemical impedance spectroscopy, C-rate testing up to 6 C under different ambient temperatures, along with cyclic aging studies, provided insights into the cells’ performance and degradation mechanisms. The findings highlighted variations in electrode coatings, particle sizes, and cathode materials among the cells, which were then correlated with their electrical behavior. This emphasized the challenges in maintaining sodium-ion battery performance, especially at low temperatures. This study was designed to establish a comprehensive knowledge base for both academic and industrial research in sodium-ion battery technology.
The interpretation of sensor system data is critical for monitoring industrial welding processes and providing reliable information about the condition of the weld seam. Previous investigations have shown that acoustic emissions of frequencies up to several kilohertz during laser beam welding are parameter-dependent and contain valuable information about the process. A microphone was employed to record the acoustic emissions produced when performing deep penetration laser beam welding of copper. Experiments were conducted in which the laser power and the feed rate were varied so as to obtain acoustic data comprising frequencies of up to 1 MHz. The signals were preprocessed and features were extracted using Fourier and wavelet analysis as well as speech analysis techniques. The relationship between the features extracted from the acoustic signal and the weld depth was modeled using Gaussian process regression. The results showed that acoustic emissions during laser beam welding can be used to predict the weld depth without having to rely on process parameters, i.e., the laser power and the feed rate. Overall, 17 features were extracted from acoustic signals, with the zero-crossing rate displaying the highest significance for determining the weld depth. These investigations open up new possibilities of robust quality assurance for laser beam welding applications based on acoustic emissions.