26 August 2021 in Frontiers in Materials
Pitting corrosion seriously harms the service life of oil field gathering and transportation pipelines, which is an important subject of corrosion prevention. In this study, we collected the corrosion data of pipeline steel immersion experiment and established a pitting judgment model based on machine learning algorithm. Feature reduction methods, including feature importance calculation and pearson correlation analysis, were first adopted to find the important factors affecting pitting. Then, the best input feature set for pitting judgment was constructed by combining feature combination and feature creation. Through receiver operating characteristic (ROC) curve and area under curve (AUC) calculation, random forest algorithm was selected as the modeling algorithm. As a result, the pitting judgment model based on machine learning and high dimensional feature parameters (i.e., material factors, solution factors, environment factors) showed good prediction accuracy. This study provided an effective means for processing high-dimensional and complex corrosion data, and proved the feasibility of machine learning in solving material corrosion problems.
20 December 2021 in IEEE Transactions on Instrumentation and Measurement
A microsensor-based fieldmeter with a moisture-proof function for ground-level atmospheric electric field (AEF) measurements is presented in this article. The electrical connection between the protective cover of the fieldmeter and the packaging cover plate of the microsensor significantly enhances the sensitivity. Moreover, a detailed simulation study is performed to analyze the influence of the fieldmeter structure parameters and the mounting pole on the sensitivity. Then, the prototype was developed, calibrated, verified, and tested outdoors. The results show that the sensitivity is 17.5176 mV/(kV/m), which is ~7.4 times that reported earlier. The resolution is 10 V/m, which has reached the level required for AEF measurement. The power consumption is 0.69 W, and there is still a lot of room to reduce it. The measured results show that the prototype can accurately measure the incident electric field in a high-humidity environment and meet the requirements of long-term outdoor use.