Bidirectional switches (BiSs) own excellent characteristics, allowing bidirectional current flow during conduction period and withstanding bidirectional voltage when turned off. However, traditional BiSs are typically implemented by the association of unidirectional discrete devices, such as the series and antiparallel connection of two active devices and two diodes, which exhibit relatively large device size and conduction losses due to the on-state voltage offset. With the popularity of wide band-gap (WBG) semiconductor materials such as SiC and GaN, there is an urgent need to design BiSs with lower on-state voltage drop, smaller conduction losses, smaller device size, and consequently higher power density. Therefore, by integrating several power transistors into a single chip, monolithic bidirectional switches (MBSs) based on WBG semiconductor materials can achieve this goal very well, exhibiting high-frequency and fast switching while reducing parasitic inductance and conduction resistance. This article provides a comprehensive review of MBSs from the perspectives of materials, physical structures, characteristics, and applications for the first time, which is helpful for the in-depth optimization and future large-scale promotion of MBSs.
High-performance GaN based one-chip direct coupled field-effect-transistor logic (DCFL) circuits were demonstrated, in which enhancement-mode (E-mode) GaN high electron mobility transistors (HEMTs) were formed simultaneously with depletion-mode (D-mode) components through the selective-area growth of p-NiO gates at room temperature by sputtering. The process boasts advantages such as a low thermal budget cost, eliminating the need for high-temperature regrowth of p-GaN, and preventing dry-etch damage. The E-mode HEMT showcases a high current density of 1.3 A/mm, a positive threshold voltage of 0.83 V, and an ON-OFF current ratio of ${7}.{24}\times {10} ^{{8}}$ , which enable input/output logic level matching with a low drive/load ratio of 1.0. The E/D-mode inverter exhibits substantial logic-low and logic-high noise margins of 2.09 V and 2.45 V, respectively, a logic voltage swing of 4.78 V, a switching threshold of 2.45 V and a voltage gain of 42 at a supply voltage of 5.0 V. With the demonstrated capability to drive power switches, this architecture provides an elegant solution for high-frequency power switching applications.
5 August 2024 in IEEE Transactions on Electron Devices
This study introduces a compact gallium nitride (GaN) dc–dc power converter that uses metal–insulator–semiconductor high-electron-mobility transistors (MIS-HEMTs) in a confined space measuring 1.2 mm $^2$ . By modulating the threshold voltages and optimizing the slew rate, the GaN converter incorporates control and drive blocks that function efficiently at a frequency of 500 kHz. The versatile pulsewidth modulation (PWM) signal generator is a crucial element that generates output waveforms with varying duty cycles (ranging from 30% to 70%) and stable 5.3-V amplitude and ensures proper operation of the gate driver and power HEMT while simplifying input signal requirements and providing precise control over the output voltage. The experimental results confirm the effectiveness of the proposed All-GaN integrated circuit (IC), showcasing its appropriateness for application in power electronics.
16 April 2024 in IEEE Transactions on Electron Devices
In power conversion systems, the power devices often need to block high voltage levels during the OFF-state. The impact of such voltage stress can cause instability for the device. This article presents the investigation of the pulsed ${I}$ – ${V}$ (PIV) OFF-state drain stress test for the etch-free hydrogen plasma-treated p-GaN gate HEMT (H-treated devices). To quantitatively demonstrate the effect of the hydrogen plasma treatment process, the device with conventional p-GaN etching at the access region (etched devices) is monolithically fabricated. Remarkably, the hydrogen treatment could eliminate surface damage from the conventional etching process and provide passivation at the access region. The direct comparison of devices’ threshold voltage ( ${V} _{\text {TH}}$ ) shift and dynamic ON-resistance ( ${R} _{\text {on}}$ ) is obtained. Under a 200-V OFF-state drain stress, the H-treated device has a low ${V} _{\text {TH}}$ shift of 0.18 V, and the dynamic ${R} _{\text {on}}$ could also be efficiently suppressed by 24%. Meanwhile, the H-treated device has only a marginal 5% current reduction compared with 48% for the etched device at 200-V stress. An exploration of the origin of the superior device performances is carried out with the TCAD simulation, activation energy derivation, and capacitance measurement. For the H-treated device, the surface state improvement at the region and the reduction of the peak electric field at the gate edge become major reasons for the improved performance.
3 June 2024 in IEEE Journal of the Electron Devices Society
This study demonstrates the first work that achieves accurate modeling of Hydrogen plasma-treated (H-treated) p-GaN gate devices with the ASM-GaN model, facilitating simulations for applications in monolithic integrated circuit (IC) design. The workflow for ASM-GaN model parameter extraction and optimization using IC-CAP is proposed. The I-V characteristics of both Enhancement / Depletion (E/D) mode devices are modeled and fitted. The impact of device capacitance on the dynamic properties of monolithic IC is investigated through the ASM model. The results demonstrate that Cds, Cgd, and Cgs have different effects on the monolithic logic circuit performances. The high-level fitting of experimental data and circuit simulation of Inverter, NAND, and Comparator circuits proves the credibility of the modeling workflow and device capacitance modulation. This work provides a method to speed up the GaN monolithic IC design by accurate modeling with fast parameter extraction workflow regardless of the fabrication process. The reliable prediction of the circuits dynamic performance will lay the foundation for designing and scaling up the GaN monolithic IC application.
This Letter presents tri-gate GaN metal–insulator–semiconductor high-electron-mobility transistors (MIS-HEMTs) with improved high-temperature performance for a monolithic integration platform, utilizing a low-damage digital recess technique. The fin structure followed by the multiple cycles of plasma oxidation and wet oxide removal process enables threshold voltage modulation from −9.1 V (D-mode) to +1.1 V (E-mode) in MIS-HEMTs, achieved by tuning the fin width between 800 and 56 nm on the same wafer. The E-mode device shows a low subthreshold swing of 76 mV/dec, a low on-resistance of 8.2 Ω·mm, and a low hysteresis of 26 mV. The E-mode device exhibits a small threshold voltage (Vth) shift of −0.13 V from room temperature up to 200 °C leading to logic inverters of stable characteristics with an inverter threshold voltage shift of only 0.16 V from 25 to 250 °C. These results validate the monolithic integration of tri-gate GaN to be promising for high-frequency and compact mixed-signal systems.