9 April 2024 in IEEE Transactions on Energy Conversion
Direct torque control (DTC) is increasingly attracted for high performance control of surface permanent magnet synchronous motors (SPMSMs) due to its easy implementation and fast dynamic response. However, the conventional switching-table-based method inevitably produces large torque and stator flux ripples because the selection of inverter's active-voltage vector is depending on the sign of torque and flux errors through hysteresis comparators regardless of their amplitude errors. To resolve these problems, a novel DTC strategy based on flux-torque decoupling is proposed in this paper. With the proposed method, two desired voltage vectors are firstly constructed to achieve the decoupling control of stator flux and torque by analyzing the relationships between applied voltage and torque and stator flux derivative. Afterwards, by applying vector synthesis to analyze the generation of two desired voltage vectors, the corresponding inverter's active-voltage vectors and their duty ratios are determined, so as to achieve the precise regulation of stator flux and torque with little ripples. Furthermore, in order to minimize the influence of machine parameters variations, a simple and real-time identification method for the ratio between permanent magnet flux linkage and stator inductance is presented. Finally, the experimental results indicate the effectiveness and feasibility of the proposed strategy
14 November 2025 in IEEE Transactions on Power Electronics
In the sensorless control of surface-mounted permanent magnet synchronous motors (SPMSMs), the model reference adaptive system (MRAS) is known for its favorable dynamic performance. However, the conventional MRAS method, which estimates the rotor position by integrating the speed estimation results, inherently results in a relatively slow convergence rate of position errors during dynamic control. To address this issue, a dual MRAS sensorless control method based on model predictive current control (MPCC) is proposed in this article. A novel dual MRAS scheme for rotor speed and position error estimation is constructed, leveraging two components of the total electromotive force (EMF) in the synchronous rotating frame through distinct estimation and prediction models. Small-signal analysis reveals that the position error equation transitions from a second-order system in the traditional method to a zero-order system in the proposed method, thereby enabling faster response and reduced dynamic position estimation errors. Furthermore, by incorporating MPCC into the current loop, the proposed method achieves a closed-loop prediction, thereby enhancing estimation accuracy and the dynamic response performance. Comprehensive experimental validations are conducted to evaluate the performance of the proposed dual MRAS method based on MPCC (D-MRAS-MPCC) methodology. The results demonstrate that the proposed method exhibits superior dynamic control performance compared to the conventional MRAS method.