Quan Yin

Quan Yin

Auto-generated profile, based on publicly available information

Quan Yin

School of Artificial Intelligence and Automation, Huazhong University of Science and Technology, Wuhan, China

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 March 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
LHli haichun
li haichun
QYQuan Yin
Quan Yin
WQWang Qingyi
Wang Qingyi
HLHui Luo
Hui Luo
YHYanting Hou
Yanting Hou
In a small dc-link drive system, the LC resonance is a typical phenomenon caused by the negative inverter admittance related to the constant power load, which is considered an instability problem that needs to be resolved well. In this article, a novel dc-link voltage feedback active damping control method is proposed to improve system stability. First, the feedback control loop with time delay is established. Based on the inverter admittance, the feedback gain is designed to handle various operating conditions properly. Meanwhile, the inverter equivalent admittance can be changed into positive to improve the system stability. Then, the oversampling method is proposed to reduce the digital control delay time and improve the damping current precision. Therefore, the system damping performance is further enhanced. Finally, the damping current modification is applied, in which the damping current is modified to negative in the motor regenerative braking mode to improve the grid power factor. Compared with the conventional active damping method, the power factor is increased to 0.989 and the grid current harmonics are reduced to satisfy the requirements of EN61000-3-2. The effectiveness of the proposed active damping method is also verified by the experimental results.

29 September 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
JMJigui Miao
Jigui Miao
LYLiu Yang
Liu Yang
QYQuan Yin
Quan Yin
BJBinlei Ju
Binlei Ju
GZGuoqing Zhang
Guoqing Zhang
Huai WangHuai Wang
Huai Wang
DC/DC converter is widely used in power electronic applications as a critical part of power supply. During operation, component parameters of the DC/DC converter gradually degrade subjected to various environmental stresses. When they degrade to deviate from the normal value, soft faults will occur and directly affect the functionality and reliability of the whole system. To identify these anomalies effectively, a novel soft fault detection and diagnosis method based on contrastive learning is proposed for a DC/DC Buck converter. First, the output voltage ripples of the converter under healthy and faulty conditions are collected. Then, a feature representation of the voltage ripple is obtained through hierarchical contrastive learning at temporal-level and instance-level. Based on the learned representation, a support vector machine classifier is established to detect and locate soft faults. The proposed method does not need extra hardware or signal injection, thereby reducing the cost and complexity. Simulation and physical experiment results verify the effectiveness and robustness of the proposed method.

18 March 2024 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
LYLiu Yang
Liu Yang
GZGuoqing Zhang
Guoqing Zhang
JMJigui Miao
Jigui Miao
ZZZijiang Zhao
Zijiang Zhao
QYQuan Yin
Quan Yin
JZJin Zhao
Jin Zhao
With the increasing demand for ocean missions, the development of autonomous marine vehicles (AMVs) has flourished. AMVs rely on electricity to power various systems, so the high reliability and stability of dc-dc converters are critical to the normal operation of AMVs. In reality, fault diagnosis and optimization of converters under the low sampling frequency and computational capability conditions remain practical challenges. This article focuses on the buck converter circuit and utilizes undersampling techniques to obtain output voltage signals sampled at a low sampling frequency. Support vector machine recursive feature elimination is employed for feature selection to reduce computation. Bayesian optimization-based extreme learning machine is used for fault diagnosis, which is suitable for actual deployment and shown to outperform three classical machine learning models. The diagnosis results are used to propose a reliability optimization strategy involving switching frequency adjustment. Physical experiments based on a digital signal processor prove the feasibility of this method.

11 July 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
JMJigui Miao
Jigui Miao
LYLiu Yang
Liu Yang
QYQuan Yin
Quan Yin
QLQian Liu
Qian Liu
YPYuxuan Pei
Yuxuan Pei
Haoran WangHaoran Wang
Haoran Wang
As critical components in power electronic systems for energy conversion and power management, DC/DC converters are commonly employed in aerospace, electric vehicles, and other electronic devices. Their degradation may lead to instability failure of the power electronic system, significantly impacting the reliability of devices. To prevent irreversible damage, various degradation detection methods have been proposed, which have advantages such as automatic, real-time, accurate, and non-invasive. However, few studies have considered effective degradation detection with reduced resource demands and sampling costs. In this paper, a signal reconstruction technique is adopted in signal acquisition and a novel early degradation detection method is proposed for the output filter capacitor and energy storage inductor of a DC/DC buck converter. In the proposed method, degradation features are extracted from output voltage ripples through long short-term memory fully convolutional network and contrastive learning. Based on the learned features of normal and degraded samples, the converter degradation state is identified. To enhance robustness against noise, the Mixup-based data augmentation is applied to increase data diversity. The effectiveness of the proposed method is verified by simulation and experiment.

9 December 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YMYuxiang Ma
Yuxiang Ma
QYQuan Yin
Quan Yin
HLHui Luo
Hui Luo
The torque ripple is an important concern in the electrolytic capacitor-less interior permanent magnet synchronous motor (IPMSM) drive system. In this article, a novel method based on d-axis harmonic current injection is proposed to reduce the torque ripple while maintaining a high power factor. The main fluctuating components in the torque with respect to the d-q axis current are derived, and possible configurations of the d-axis current reference are analyzed to obtain an optimal solution to reduce the torque fluctuations. To further improve the power factor, an active damping method based on virtual damping resistor is used to suppress harmonics in the grid current, and a feedforward power compensation link is added to improve the grid current quality. The torque ripple component can be reduced and the requirements of EN61000-3-2 can be satisfied by applying the proposed method. Experimental results on an IPMSM drive platform with a small film capacitor verify the effectiveness of the proposed method.

8 April 2020 in IEEE Access
Verified
Journal Article
Open access
LHli haichun
li haichun
QYQuan Yin
Quan Yin
WQWang Qingyi
Wang Qingyi
JMJigui Miao
Jigui Miao
YHYanting Hou
Yanting Hou
In traditional motor drive system, large volume electrolytic capacitors are utilized to buffer energy and stabilize the dc-link voltage. However, these capacitors affect the reliability of the drives and narrow the conduction angle of diode-rectifier. As a result, the grid side current is distorted and the power factor is deteriorated. In order to settle these issues, small dc-link capacitors can replace the electrolytic capacitors. In this paper, a motor torque control method with dc-link voltage feed-forward compensation for an interior permanent magnet synchronous motor (IPMSM) drive system is proposed. Hence, an integration multi-resonant (I-MR) controller is established to regulate the motor torque to obtain high input power factor and low grid current harmonics. In addition, a voltage feed-forward compensation is used to diminish the error of motor torque control. The effectiveness of the proposed method is verified through simulation and experiments. Results indicate that the input power factor can reach about 99.4% and the grid current harmonics are considerably lower than the requirement of EN-61000-3-2 standard.