18 March 2024 in IEEE Transactions on Vehicular Technology
The literature shows increasing interest in the energy efficiency aspects of electric vehicles with multiple actuators, e.g., capable of individual wheel torque and rear-wheel-steering control, and proposes controllers considering the relevant vehicle power losses. However, the available studies lack systematic analyses on: i) the energy saving potential of the individual actuation methods, and their combinations; and ii) the operating conditions in which a set of actuators is particularly effective in reducing power consumption. This paper targets the identified gap. After providing background on the relevant power losses, three forms of actuation, i.e., torque-vectoring through two or four electric powertrains, active suspensions for front-to-total anti-roll moment distribution control, and rear-wheel-steering, are explored through a set of simulations in quasi-steady-state conditions, by using an experimentally validated high-fidelity non-linear vehicle model. The analysis covers a range of vehicle speeds, longitudinal and lateral accelerations, and tire-road friction conditions, and determines: a) the most energy-efficient understeer characteristics, i.e., the loci of the front steering angle as a function of lateral acceleration providing the minimum power consumption, for each set of actuators; b) the energy-efficient actuations for achieving given understeer characteristics; and c) the power consumption penalty of each considered configuration with respect to the one with the complete set of actuators.
3 October 2024 in IEEE Access
Although the literature includes examples of model predictive controllers for trailer sway mitigation through direct yaw moment control in car-semitrailer configurations, the available studies do not consider the integration of direct yaw moment control and other actuations within the towing vehicle, e.g., anti-roll moment distribution control through active suspension (AS) systems. This study focuses on the integration of torque-vectoring (TV) and AS control on the towing car, to provide yaw rate tracking, sideslip angle limitation, and trailer sway reduction. Given the nonlinearity of the effect of the anti-roll moment distribution on the articulated vehicle dynamics, nonlinear model predictive control (NMPC) is selected as an effective technique for the specific problem. The paper presents and analyzes several alternative real-time implementable NMPC algorithms, using either the predicted trailer hitch dynamics or the estimated hitch joint forces for the control of an electric all-wheel-drive car towing a semitrailer. The simulation results, obtained through a high-fidelity simulation environment, including an optimization based tuning routine for a fair comparison of the controllers, show that: i) AS actuated in isolation brings higher semitrailer stability than a baseline TV controller focusing only on the towing car; ii) the best performance is provided by the integrated control of AS and TV, with respect to (w.r.t.) the other considered configurations; iii) the NMPCs based on car prediction models considering the current hitch joint forces can be a valuable alternative to the NMPCs embedding the hitch dynamics; and iv) all NMPC approaches are rather robust w.r.t. significant variations of semitrailer parameters.