In this work, it is demonstrated that the buck converter using a GaN/Si hybrid switch can achieve an even higher power conversion efficiency than the one using a pure-GaN switch with the same ratings. By replacing one of the dual paralleled GaN HEMTs with a Si superjunction mosfet having the same voltage rating yet a slightly higher resistance, the total conduction loss, however, is significantly decreased. This is accomplished through suppressing the dynamic ON-state resistance peculiar to GaN HEMTs. Optimizing the gate timing between the GaN and the Si devices within the hybrid switch enables exceptional low-loss performance. Both device-level and system-level demonstrations are performed. The experimental results prove that the p-GaN gate HEMT/Si MOSFET hybrid switch increases the efficiency by 2% and 3%, respectively, when compared to its pure-GaN and pure-Si counterparts, at an output power of 240 W and a switching frequency of 500 kHz.
In this work, a GaN/Si hybrid power switch is proposed to overcome the disadvantages of dynamic ON-resistance degradation and limited avalanche capability for pure-GaN switches. The proposed hybrid switch exhibits suppressed dynamic ON-resistance, increased power conversion efficiency and enhanced avalanche robustness when compared to the pure-GaN switch with exactly the same ratings. By employing an active gate control pattern between GaN and Si devices within the hybrid switch, the dynamic ON-resistance is significantly reduced by more than 20%. Consequently, it increases the efficiency by 2% in a 48-to-24 V DC-DC buck converter at the switching frequency of 500 kHz and an output power of 240 W. The single-event avalanche energy withstanding capability shows a two-order-of-magnitude improvement and no failure is observed after a 1000-cycle repetitive UIS (Unclamped Inductive Switching) test.
1 January 2026 in IEEE Transactions on Electron Devices