Miloš Milić

Miloš Milić

Auto-generated profile, based on publicly available information

Miloš Milić

University of Nis

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 December 2022 in Periodica Polytechnica Civil Engineering
Verified
Journal Article
Open access
PDF file
TVTodor Vacev
Todor Vacev
AZAndrija Zorić
Andrija Zorić
Dusan GrdicDusan Grdic
Dusan Grdic
NRNenad Ristic
Nenad Ristic
ZGZoran Jure Grdic
Zoran Jure Grdic
MMMiloš Milić
Miloš Milić
The topic of this paper is experimental and numerical analysis of the impact strength of unreinforced concrete slabs. Impact strength of concrete is significant in case of some accidental loads during exploitation. Impact strength can be determined experimentally, using Drop-weight test, Charpy test, Projectile impact test, Explosive test, etc. In this research, a numerical model for determining the impact strength of concrete slabs based on Finite element method (FEM) and high-end engineering software has been proposed. Modelling approach to this problem was applying the Explicit dynamics FEM analysis. Thereat, two different existing material models for concrete were enforced: Concrete damage plasticity model – CDP (implemented in ABAQUS/Explicit software), and the Riedel-Hiermaier-Thoma model – RHT (implemented in ANSYS Workbench software). Analysis parameters for both material models, necessary as input data, have been determined through a series of FEM analyses and validated by performed experiments, using drop-weight test. Results of the numerical analyses have been compared with the experimental ones, as well as mutually. Advantages and drawbacks of both material models are highlighted, as well as the reliability of the proposed numerical models. The proposed numerical FE models, confirmed by experiments, can be successfully used for determining impact strength of concrete slabs in further research.

16 August 2023 in Periodica Polytechnica Civil Engineering
Verified
Journal Article
Closed access
PDF file
MMMiloš Milić
Miloš Milić
TVTodor Vacev
Todor Vacev
Predrag PetronijevićPredrag Petronijević
Predrag Petronijević
INIvan Nešović
Ivan Nešović
AZAndrija Zorić
Andrija Zorić
BMBiljana Matejević-Nikolić
Biljana Matejević-Nikolić
Steel-timber composite structures have numerous advantages compared to steel only and timber only structures. One of the most important parts of a composite structure is the composite connection. Object of this research was a steel-CLT composite connection consisting of a steel profile, a cross-laminated timber (CLT) panel and a bolt with nut and washer. Aim of the research was to develop an efficient finite element (FE) model of a bolted steel-CLT composite connection and to validate it experimentally. The research process consisted of several steps: experimental testing of the considered connection using asymmetrical push-out test, numerical modelling and analysis of the connection using Finite Element Method (FEM), validation of the numerical model using experimental results, and parametric study of the proposed numerical model. For numerical analysis, an innovative method for timber modelling has been proposed. The comparison between the experimental and numerical research results demonstrated that the proposed numerical model was convenient for practical application in structure analyses. The parametric study showed that, in some cases, atypical failure modes of the connection occurred. Based on registered behavior, a recommendation is given to calculate the load capacity of the connection integrally, taking into account both the primary (Johansen’s) and the secondary (rope effect) part of the connection strength, instead partially, as proposed by EN standards.

1 January 2026
Verified
Conference Paper
Closed access
RPRadovan Perić
Radovan Perić
MMMiloš Milić
Miloš Milić
NRNiklola Romic
Niklola Romic
This paper presents a condition assessment and an analysis of the degradation causes for the road bridge over the Nišava River near the village of Vrandol, in the municipality of Bela Palanka. The structure represents a specific modification of the „Karpoš“ precast system, where steel wagon-type beams were utilized for the superstructure alongside standard substructure elements – specifically, precast piles. Through field investigation and macroscopic inspection, a critical structural condition was identified, primarily caused by the loss of stability in the substructure. Due to the impact of debris and ice, significant deviations from the vertical alignment were observed in the reinforced concrete conical piles. These geometric imperfections induced substantial parasitic stresses within the columns and main girders. Coupled with evident corrosion of the steel elements and degradation of the deck slab due to inadequate drainage, the bridge’s load capacity has been reduced below safety limits. This paper categorizes the recorded damages and proposes urgent rehabilitationl measures, while recommending a temporary traffic ban to prevent structural collapse.

1 January 2022 in Facta universitatis - series: Architecture and Civil Engineering
Verified
Journal Article
Open access
PDF file
MMMilos Milic
Milos Milic
Predrag PetronijevićPredrag Petronijević
Predrag Petronijević
TVTodor Vacev
Todor Vacev
AZAndrija Zorić
Andrija Zorić
INIvan Nesovic
Ivan Nesovic
During rehabilitation of residential buildings built in the first half of the 20th century, it is necessary to strengthen timber floors so they can fulfill the requirements of strength and serviceability according to contemporary regulations. Floors made of monolithic timber girders can be most easily strengthened by forming a composite structure with a reinforced concrete slab supported on a trapezoidal steel sheeting, with appropriate connections between different materials. In the paper, the procedure of calculation of nails used as shear connectors for composite action of timber and concrete is presented. The procedure is based on equations given in Eurocode 5, and besides that, a calculation applying FEM has been conducted, and a comparison of results is presented.

1 January 2025
Verified
Conference Paper
Closed access
Predrag PetronijevićPredrag Petronijević
Predrag Petronijević
MMMiloš Milić
Miloš Milić
AZAndrija Zorić
Andrija Zorić
The paper shows the reconstruction of the supporting structure of the main hall of the Leskovac Fair. The specifics of the construction with a roof structure in the form of a network of orthogonal cables were analyzed. The significance of the building is reflected in the innovative system applied to the roof and in the architectural achievement of Yugoslav architecture in the mid-20th century. In this period, only a few buildings with this design were built in the world. In terms of historical heritage, the Fair building is the embodiment of former economic development and a witness to the industrial and cultural life of Leskovac and its surroundings. The paper presents the measures aimed at rehabilitating the building. The reconstruction design envisaged the addition of two floors with commercial function along with the conversion of the building into a shopping center. The newly designed part of the structure is subtly incorporated into the existing reinforced concrete structure. The design provided for maximum preservation of the authenticity of the external appearance of the hall.

23 September 2026
Verified
Conference Paper
Open access
PDF file
MMMiloš Milić
Miloš Milić
This paper presents the development of an innovative steel-cross laminated timber (steel-CLT) shear connector designed for efficient shear transfer. The structural performance and mechanical behaviour of the proposed system were comprehensively evaluated through experimental testing and numerical modelling. Push-out tests were conducted to evaluate the load-carrying capacity, stiffness, and failure modes under static loading. Additionally, a three-dimensional finite element model was developed to simulate the nonlinear response, material behaviour, and contact mechanics between the steel components and timber layers. The numerical model was validated against experimental results, showing strong agreement in terms of load-displacement behaviour and ultimate capacity. The findings demonstrate that the proposed connection achieves high strength and ductility, offering a promising solution for composite steel-timber structures.