In this paper, a method is proposed, for the first time, to increase the linear modulation range till full base speed irrespective of load power factor for a multilevel inverter fed induction motor (IM) drive. A 5-level inverter with a single DC source is used for the proposed scheme. Using this method, linear PWM operation of the inverter can be achieved till peak phase fundamental voltage of 0.637Vdc without exceeding machine phase voltage rating. This method eliminates all the lower order harmonics from machine phase voltage till the full speed range of operation. The proposed 5-level inverter scheme is realized by cascading a 2-Level inverter with a capacitor fed H-Bridge, feeding Open-End Induction Motor (OEIM) drive from one end and a capacitor fed 2-Level inverter from the other end. The proposed scheme uses Space Vector (SV) redundancy to balance all the capacitors during its operation. Operation of the proposed drive is analyzed extensively for normal 5- Level operation as well as during the extended modulation range. Experimental results for steady state and transient state operation are presented to validate the proposed scheme.
31 March 2022 in IEEE Transactions on Power Electronics
This article proposes a novel nine-level multilevel inverter topology with an instantaneous voltage balancing scheme of stacked dc-link capacitors for an induction motor (IM) drive application. Three neutral points (NPs, terminal joints of four series-connected capacitors) across a single dc-link are balanced instantaneously (within a sampling interval) by ensuring zero current at the NPs. The proper selection of pole voltage from the redundancies provides zero current at any NP during the pulsewidth modulation operation under a steady-state and transient operation. A five-level stacked inverter and three cascaded hybrid-bridge (CHB) inverter cells are used in each phase. Along with the balancing of dc-link capacitors, CHB capacitors’ voltage balancing is also achieved using the pole voltage redundancies at all modulation indexes for all power factor and load. It is also possible to increase more number of levels using more low-voltage switches, and a generalized form of the topology is presented. The concept is validated using a laboratory-developed nine-level inverter with a three-phase IM load, operated under “V/f” control. The detailed experimental results for the steady and transient condition, simulation studies for switching loss, and harmonic content in the phase voltage are also presented.
29 December 2021 in IEEE Transactions on Industrial Electronics
In this article, a nine-level multilevel topology is proposed by stacking of low voltage basic inverter cells and then cascading with H-bridges. The dc-link is split into four equal halves by series-connected capacitors from a common dc-link. Three common coupling points (CCPs) are formed due to the stacking of four capacitors, which are connected across the dc-link. The CCP voltage balancing is ensured by drawing or injecting zero instantaneous currents from each of these points at any instant. A six-phase symmetrical IM is used to generate equal and opposite instantaneous phase currents by applying exactly equal and opposite phase voltages for two opposite phases from the six-phase inverter. Simultaneously, the capacitor voltage balancing of H-bridge inverter cells is also achieved by proper selection of redundancies from the available pole voltage redundancies. The concept is verified with a nine-level inverter laboratory prototype, which consists of a five-level stacked inverter, and followed by two low voltage cascaded H-bridge inverters in each phase. Detailed experimental results of steady-state and transient conditions are included to validate the proposed scheme.
8 April 2022 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
This article proposes a multilevel 24-sided polygonal voltage space vector structure (VSVS), eliminating lower order harmonics up to 19th order and suppressing higher order harmonics in motor phase voltage throughout the modulation range. Unlike switched average vectors in literature, the proposed scheme generates real active vectors that have the advantage of less switching frequency operation. The proposed VSVS consists of two concentric polygons divided into similar triangles resulting in a simple modulation algorithm. Instantaneous error in phase voltage reduces due to the multilevel property of the proposed VSVS. The proposed scheme extends the dc bus utilization and linear range of operation. The proposed scheme is implemented on an open-end winding induction motor fed with primary and secondary inverters from either end. This article also presents a modulating wave-based method to compute nearest vector timings using sampled reference waves only. Unlike conventional methods, the proposed timing calculation method does not require trigonometric operations, sorting algorithms, and iterative search algorithms. Experimental verification of the proposed scheme is performed to validate the concept. Switching loss and Fourier analysis comparison with some existing schemes is also presented.