4 April 2018 in IEEE Transactions on Power Electronics
This paper presents a novel high voltage conversion ratio (HVCR) bidirectional CLTC resonant DC-DC converter. Based on LLC, SRC and CLLC, the novel CLTC structure is proposed. With the use of auxiliary transformer and extra resonant capacitor, CLTC resonant DC-DC converter can achieve zero voltage switching (ZVS) in all load range. Also, CLTC has a good gain characteristic with high power load. In this study, a review of the statuses for the isolated HVCR bidirectional converters is made. The operating principle of bidirectional power flow in two directions is analyzed in details. In addition, by changing AC output resistance, a modified fundamental harmonic analysis (FHA) method makes the calculated gain curve more accurate than traditional FHA. Also, voltage and current stresses of power switches and resonant capacitors are given. A parameter optimization method is proposed to minimize the impedance angle of CLTC, which corresponds to less reactive power and turn-off current. The optimal parameters show advantages in voltage and current stresses. Moreover, power losses are analyzed in this study, showing advantage of CLTC in efficiency. At last, the experimental results based on a 5 kW prototype converter are presented to validate the theoretical analyses.
1 April 2019 in IEEE Transactions on Industrial Electronics
A novel high conversion ratio bidirectional C-dual transformers-LC (CDT-LC) resonant DC-DC converter is proposed in this paper. Based on the traditional LLC, an auxiliary transformer and an extra resonant capacitance are employed in CDT-LC structure. It not only harvests high efficiency but exhibits a good voltage gain feature. Especially for the case of light load, CDT-LC still harvests a high efficiency, compared with traditional converters. Also, it can achieves a fast gain reduction when the switching frequency is higher than resonant frequency. In this paper, the operating principles of the converter are analyzed in both bi-directional operation modes. In additional, its dual-transformers structure feature and voltage gain characteristics are discussed in details. Furthermore, the parameter design method is provided. Moreover, the loss breakdown for the converter is given in details. At last, a 2.5kW prototype is established to verify the performance of the CDT-LC converter, and its maximum efficiency reaches 97%.
17 October 2022 in IEEE Transactions on Power Electronics
A novel s LC _ LCC resonant dc–dc converter is proposed in this article. With the combination of a notch filter and a new s LC excitation structure of the transformer, wide and fast gain characteristics are obtained. With the frequency modulation, the notch filter structure helps the converter realize a wide output voltage range adjustable from zero theoretically. Besides, the fast voltage gain regulation capacity is achieved in a narrow frequency range with the s LC excitation structure. In the text, topology structure, operation principle, and characteristics analysis are illustrated in detail. For numerous passive components, an effective design method is necessary to guide parameter determination. And a detailed parameter design process is discussed. With the selected parameters, the soft-switching feature is realized. Finally, a 500 W experimental prototype is fabricated to verify the feasibility and effectiveness of theoretical analysis. The converter achieves 59.3–16.3 V output voltage regulation ability in a narrow frequency range (86 kHz, 189 kHz) under the condition of power 500 W and input voltage 375 V. High efficiency is maintained in the full load range, and the maximal efficiency of the converter reaches 97.7% at 99.5 kHz.
16 October 2023 in IEEE Transactions on Industrial Electronics
In order to enlarge the voltage gain range and improve the conversion efficiency over the whole load, the combination between ISOP- LLC and configurable rectifier is conducted in this article, which constructed three operation modes. On this basis, in order to solve the problem of volume and parameter consistency caused by multiple magnetic components faced by ISOP- LLC converter, and further improve efficiency, a novel integrated magnetic and PCB winding design method is mainly studied and proposed. The detailed analysis is carried out for the three working conditions. Finally, to verify the proposed theory, a 250 W/350 kHz-rated prototype is designed and established to handle 95–225 V/24 V voltage conversion, which has the peak efficiency of 97.4%.