Samal Muratova

Samal Muratova

Auto-generated profile, based on publicly available information

Samal Muratova

Satbayev University

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 April 2023 in Machines
Verified
Journal Article
Open access
PDF file
BRBoranbay Ratov
Boranbay Ratov
Miroslaw RuckiMiroslaw Rucki
Miroslaw Rucki
BFBoris Fedorov
Boris Fedorov
Edwin Spartak GevorkyanEdwin Spartak Gevorkyan
Edwin Spartak Gevorkyan
ZSZbigniew Siemiątkowski
Zbigniew Siemiątkowski
NBNikolai Bondarenko
Nikolai Bondarenko
The paper is dedicated to the enhancement of Polycrystalline Diamond Bits (PDC) designed for oil and gas industry. A novel diamond-reinforced composite was applied for cutting inserts, with the addition of 4 wt% chromium diboride to the WC-Co matrix. The addition of CrB2 ensured improvement of bending strength and fracture toughness by nearly 30% and 40%, respectively, and enhanced the diamond retention force. The efficiency of PDC bits was further improved by incorporating constructional features in both bottomhole and reaming parts. An analytical relationship between the feeding speed and geometrical parameters was found, including the wings and calibrating inserts numbers, as well as the rotational speed of the cutter. Under the conditions of rock fracture by reaming inserts, the approximate value of the required power was calculated.

29 February 2024 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Verified
Journal Article
Closed access
MBM. T Biletskiy
M. T Biletskiy
BRBoranbay Ratov
Boranbay Ratov
Volodymyr KhomenkoVolodymyr Khomenko
Volodymyr Khomenko
ABA. R Borash
A. R Borash
SMS. K Muratova
S. K Muratova
New+Mining +https://doi.org/10.33271/nvngu/2024-1 +/jdownloads/pdf/2024/1/01_2024_contents-en-GB.pdf

15 December 2023 in Neft i Gaz
Verified
Journal Article
Closed access
SUSATBAYEV UNIVERSITY
SATBAYEV UNIVERSITY
BRBoranbay Ratov
Boranbay Ratov
MBM.T. Biletskiy
M.T. Biletskiy
AMAssyl Makyzhanova
Assyl Makyzhanova
ABA.R. Borash
A.R. Borash
SMS.K. Muratova
S.K. Muratova
The peculiarities of the collimation zones of the productive formation are taken into account when rotary drilling of wells using drilling mud. A brief analysis of the most common and fundamentally different decollatation procedures, such as washing wells with water, pumping and gelation, is presented. A very effective and promising method of decollatation using the implosion effect has a special influence. A detailed example of a well-known device is given with an analysis of the features of its application, as well as significant disadvantages in the form of complexity and functionality, high cost. A fundamentally different new device was developed and proposed, free from all the disadvantages of the opposite device for which the invention was requested. This eliminates the use of pumping and compressor pipes and their sealing, as well as a sealant for the neck. There is also no need for a compressor and surface wiring with numerous valves. Replacing the intake valve valve with a disc valve eliminates the possibility of closing the intake valve as a result of the influx of reservoir fluid with a high content of collating materials caused by the implosion effect. The design and functioning features of the proposed device and its individual elements are taken into account both when creating a single, and with any number of repeated implosive effects. The generation limits necessary for the explosion effect of the liquid-filled space were mathematically analyzed to prevent the case from crumpling under the hydrostatic pressure of the solution remaining in the storage space. An example of the dependence of the permissible length of empty space on the thickness of the housing column and, in particular, on the thickness of the walls is illustrated using a computer program.

30 August 2025 in Neft i Gaz
Verified
Journal Article
Closed access
YUYESSENOV UNIVERSITY
YESSENOV UNIVERSITY
SASarbopeyeva
Sarbopeyeva
ZMZ.T. Mataeva
Z.T. Mataeva
SUSatbayev University
Satbayev University
MAM.M. Aliakbar
M.M. Aliakbar
CUCASPIAN UNIVERSITY
CASPIAN UNIVERSITY
This work considers maintaining the required density of drilling mud using weighting agents such as barium sulfate (BaSO4) as a key factor in ensuring wellbore stability and preventing complications during drilling. However, the introduction of barite into the drilling fluid can cause contamination of productive formations, reducing their permeability and productivity. Penetration of solid barite particles into the pore space leads to clogging of pores and filtration channels, which often becomes irreversible without specialized cleaning methods. To reduce the risk of contamination, it is necessary to optimize the composition of the drill-ing fluid and carefully control drilling parameters. The use of crystallization inhibitors, stabilizers, and polymer additives helps reduce barite sedimentation and decrease its adhesion to pore walls. This significantly lowers the likelihood of damage to productive intervals. In cases of existing contamination, restorative technologies are applied. Mechanical cleaning, including high-pressure well flushing, may be effective for surface-level clogging but has limited effectiveness for deep particle penetration. A more promising approach is the use of chelating agents capable of binding barium ions and breaking down barite deposits. The effectiveness of these reagents depends on the physical and chemical characteristics of the reservoir. An alternative solution involves specialized solvents designed for selective dissolution of barite in the pore space. Their application requires engineering justification and laboratory verifica-tion. A comprehensive approach, including optimization of the drilling fluid composition, control of technological parameters, and timely application of chemical reagents, helps maintain formation productivity and reduce operational costs during well drilling.

25 June 2026 in Neft i Gaz
Verified
Journal Article
Closed access
SMS.K. Muratova
S.K. Muratova
EOE.ZH. Omirzakova
E.ZH. Omirzakova
GUGulzada Umirova
Gulzada Umirova
BRBoranbay Ratov
Boranbay Ratov
AKAidar Ermekkalievish Kuttybayev
Aidar Ermekkalievish Kuttybayev
AZA.O. Zhailiev
A.O. Zhailiev
The aim of this study was to develop a hardware–software system for real-time automated monitoring of drilling fluid density, Marsh funnel viscosity, plastic viscosity, and yield point. An automated density measurement device was developed based on variations in the inductance of an electromagnetic system caused by the interaction between a magnetic core and fluids of different densities. Continuous data analysis methods and artificial intelligence algorithms were employed to evaluate rheological parameters. Laboratory and comparative tests were conducted using a standard Fann 35 viscometer at a temperature of 80°C. The developed system provided continuous measurement of drilling fluid parameters with an error not exceeding 2.5%, in compliance with API RP 13B-1 requirements. Comparison with the Fann 35 viscometer demonstrated deviations within the range of 3–5%. The system successfully identified abnormal operating conditions, including increases in viscosity and reductions in yield point, with a response time of less than 30 seconds. The obtained results confirmed the effectiveness of intelligent methods for predicting changes in the rheological properties of drilling fluids. The developed system improves the efficiency of drilling fluid parameter monitoring, minimizes the influence of the human factor, and enables integration into digital drilling management systems. The proposed technology also demonstrates significant potential for predicting drilling complications and expanding system functionality through the inclusion of additional monitoring parameters, such as pH and gas content.

27 December 2025
Verified
Conference Paper
Closed access
SMSamal Muratova
Samal Muratova
Volodymyr KhomenkoVolodymyr Khomenko
Volodymyr Khomenko
OPOleksandr Pashchenko
Oleksandr Pashchenko
ZMZaira Matayeva
Zaira Matayeva
ZKZhanna Kenzhegalieva
Zhanna Kenzhegalieva
Drilling fluid viscosity is a critical parameter influencing the efficiency and safety of drilling operations, yet real-time monitoring under dynamic conditions remains challenging due to varying temperature, pressure, and flow rates. This study develops algorithms for continuous, automated viscosity monitoring of drilling fluids to optimize drilling processes. The primary objective is to design robust algorithms capable of accurate viscosity predictions in real-time, addressing limitations of traditional manual methods like the Fann 35 viscometer, which are labor-intensive and fail to capture rapid rheological changes. The methodology involves testing water-based and oil-based muds using inline viscometers, pressure transducers, and temperature sensors. Signal processing techniques, including low-pass filtering, and machine learning models, such as linear regression and neural networks, were developed to process sensor data and predict viscosity. The neural network model achieved accuracy (RMSE of 0.42 cP for water-based muds, 0.67 cP for oil-based muds in lab tests) compared to linear regression (RMSE of 0.85 cP and 1.12 cP). Tests confirmed robustness, with the neural network maintaining an RMSE of 0.58 cP and 0.79 cP. Statistical analysis using ANOVA and regression validated the results, demonstrating significant improvements over existing methods. The system enables real-time adjustments, enhancing drilling efficiency and safety. Future work includes improving algorithm adaptability and exploring edge computing for remote applications.