The environmental problems of the formation and accumulation of various types of wastes, in particular, galvanic sludge (GS), which are pollutants of biosphere complexes, are considered. By polluting air, soil, surface and underground waters, they pose a serious ecological hazard to the environment and public health. Along with this, galvanic sludge often contains very valuable components - ferrous and non-ferrous metals, which can be used to obtain products and goods that are of great importance for national economic. The paper presents the results on the utilization of galvanic sludge into materials for the creation of magneto sorbents (MS) when removing various oil contaminants from waste and surface waters. A method for ferritization of iron-containing galvanic waste is proposed, in which, due to the presence of iron, the material acquires magnetic properties and can be used as a magnetic component of composite MS, which greatly simplifies the process of cleaning the water surface from a film of oil and oil products using magnetic separation. During ferritization, films of mixed oxides of ions of heavy metals and iron - ferrites with the general formula MeOFe2O3 are formed on the surface of metal hydroxide particles. Investigation of the process of ferritization of iron-containing GS by the thermal method has been carried out. The main parameters of the ferritization process have been empirically established: t = 1000 degrees C and tau = 1.5 h. Received powdery ferritized galvanic sludge (FGSt) has well-pronounced magnetic properties, the saturation induction determined using a vibration magnetometer was 0.02 T. This allows it to be used as a component in the preparation of composite MS. For hydrophobization of FGSt and obtaining granular oil sorbents, paraffin was used in a ratio of components 1 : 2 by weight. It was found that the buoyancy of the obtained composite magneto sorbents (CMS) for 96 h was 98-100%, respectively, the water absorption did not exceed 0.2 g water/g. The wettability of the materials was evaluated by measuring the contact angles of a sitting drop formed on the surface of the compacted layer of the material. The contact angle is 140 degrees, which indicates good hydrophobicity of the materials. Technological solutions have been developed, environmentally friendly methods of manufacturing composite sorption materials for purification of waste and surface waters from various types of oil and oil products have been proposed. It is shown that with the disposal and rational use of galvanic sludge waste in the production of composite MS for the purification of water bodies from oil and oil products, ecological, economic and social benefits can be obtained.