Chih-Sung Ho

Chih-Sung Ho

Auto-generated profile, based on publicly available information

Chih-Sung Ho

Graduate School of Chemical and Materials Engineering, Tunghai University, Taichung, Taiwan

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 June 2021 in Polymers
Verified
Journal Article
Open access
PDF file
Yu-Hsun NienYu-Hsun Nien
Yu-Hsun Nien
ZKZhi-Xuan Kang
Zhi-Xuan Kang
TSTzu-Yu Su
Tzu-Yu Su
CHChih-Sung Ho
Chih-Sung Ho
Jung-Chuan ChouJung-Chuan Chou
Jung-Chuan Chou
YHYu-Hao Huang
Yu-Hao Huang
Potentiometric biosensors based on flexible arrayed silver paste electrode and copper-doped zinc oxide sensing film modified by iron-platinum nanoparticles (FePt NPs) are designed and manufactured to detect lactate in human. The sensing film is made of copper-doped zinc oxide (CZO) by a radio frequency (RF) sputtering system, and then modified by iron-platinum nanoparticles (FePt NPs). The surface morphology of copper-doped zinc oxide (CZO) is analyzed by scanning electron microscope (SEM). FePt NPs are analyzed by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The average sensitivity, response time, and interference effect of the lactate biosensors are analyzed by voltage-time (V-T) measurement system. The electrochemical impedance is analyzed by electrochemical impedance spectroscopy (EIS). The average sensitivity and linearity over the concentration range 0.2–5 mM are 25.32 mV/mM and 0.977 mV/mM, respectively. The response time of the lactate biosensor is 16 s, with excellent selectivity.

23 September 2020 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
Yu-Hsun NienYu-Hsun Nien
Yu-Hsun Nien
TSTzu-Yu Su
Tzu-Yu Su
CHChih-Sung Ho
Chih-Sung Ho
Jung-Chuan ChouJung-Chuan Chou
Jung-Chuan Chou
CLChih-Hsien Lai
Chih-Hsien Lai
CWChu-Hsuan Wang
Chu-Hsuan Wang
In this work, we used radio frequency (RF) system and screen printing technology to fabricate urea biosensor based on urease-maghemite nanoparticles (ɣ-Fe₂O₃ NPs)/graphene oxide (GO)/nickel oxide (NiO) sensing membrane on silver conductive wire printed polyethylene terephthalate (PET) substrate. The V-T measurement system was used to investigate the sensing characteristics of urea biosensors based on GO/NiO sensing membrane modified by ɣ-Fe₂O₃ NPs. The sensing membrane was modified by adding different contents of ɣ-Fe₂O₃ NPs. The concentration of ɣ-Fe₂O₃ NPs was 1 mg/mL. When the volume ratio of urease/ɣ-Fe₂O₃ NPs was 1/1, it had the best sensitivity. The average sensitivity, the linearity, and the limit of detection of (LOD) of the best urea biosensor in this work were 52.36 mV/decade ± 0.22 mV/decade, 0.996, and 7.91 μ M, respectively. The effect of temperature on the urea biosensor was investigated from 25 °C to 65 °C. The stability of urea biosensors was evaluated by the effect of hysteresis and long-term storage stability. After 29 days, the average sensitivity remained 80.62% of the initial value. Compared with other urea biosensors, our urea biosensor based on urease-ɣ-Fe₂O₃ NPs/GO/NiO sensing membrane has better average sensitivity.

8 January 2021 in IEEE Journal of the Electron Devices Society
Verified
Journal Article
Open access
Yu-Hsun NienYu-Hsun Nien
Yu-Hsun Nien
TSTzu-Yu Su
Tzu-Yu Su
Jung-Chuan ChouJung-Chuan Chou
Jung-Chuan Chou
Po-Yu KuoPo-Yu Kuo
Po-Yu Kuo
CLChih-Hsien Lai
Chih-Hsien Lai
TLTsu-Yang Lai
Tsu-Yang Lai
From our other works, we have developed urea biosensor based on graphene oxide/nickel oxide sensing film modified either by Au nanoparticles or ${\gamma }$ -Fe 2 O 3 nanoparticles. In this study, we have further developed back-end calibration circuit to reduce the drift effect and hysteresis effect of the two types of the urea biosensors. The back-end calibration circuit is composed of non-inverting amplifiers, error amplifiers, P-MOSFET transmission transistor, feedback networks, output voltage capacitors and resistor dividers. After applying the back-end calibration circuit, the drift rate of urea biosensor modified by Au NPs is reduced from 3.06 mV/hr to 0.28 mV/hr, which is 90.85% reduction. The drift rate of urea biosensor modified by ${\gamma }$ -Fe 2 O 3 NPs is reduced from 3.92 mV/hr to 0.57 mV/hr, which is 85.46% reduction. Through the back-end calibration circuit to reduce the hysteresis effect, the hysteresis voltage for the forward cycle and reverse cycle of the urea biosensor modified by Au NPs are reduced by 26% and 30%, respectively. The hysteresis voltage for the forward cycle and reverse cycle of the urea biosensor modified by ${\gamma }$ -Fe 2 O 3 NPs are reduced by 23% and 28%, respectively.

10 January 2023 in IEEE Transactions on Semiconductor Manufacturing
Verified
Journal Article
Closed access
Yu-Hsun NienYu-Hsun Nien
Yu-Hsun Nien
SZShang-Wen Zhuang
Shang-Wen Zhuang
Jung-Chuan ChouJung-Chuan Chou
Jung-Chuan Chou
PYPo-Hui Yang
Po-Hui Yang
CLChih-Hsien Lai
Chih-Hsien Lai
PCPo-Feng Chen
Po-Feng Chen
In this study, iron oxide (Fe2O3)/graphitic carbon nitride (g-C3N4)/titanium dioxide (TiO2) nanofibers (NFs) were used as an additional layer on photoanode in dye-sensitized solar cells (DSSCs) to improve the photovoltaic performance of DSSCs. The nanofibers were prepared by electrospinning with double jets. The heterogeneous nanofiber composite mainly includes Fe2O3, g-C3N4, and TiO2. The Fe2O3/g-C3N4/TiO2 NFs were characterized by X-ray diffractometer (XRD), and the surface morphology was observed by a field emission scanning electron microscope (Fe-SEM). The electrochemical impedance spectroscopy (EIS) was applied to analyze the impedance of the cell. The incident photon current efficiency (IPCE) measurements were applied to determine the quantum efficiency, and ultraviolet-visible (UV-Vis) spectrophotometer was applied to observe the dye adsorption and absorption wavelength. To understand the performance of the modified photoanodes in DSSCs, we analyzed the photovoltaic parameters. The results suggest that the addition of Fe2O3/g-C3N4/TiO2 NFs is able to improve the conversion efficiency of the modified DSSCs to 4.81%. In addition, the efficiency under different illumination was also analyzed, and the highest conversion efficiency was 6.81% at 30 mW/cm2.

1 October 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
Yu-Hsun NienYu-Hsun Nien
Yu-Hsun Nien
ZKZhi-Xuan Kang
Zhi-Xuan Kang
Jung-Chuan ChouJung-Chuan Chou
Jung-Chuan Chou
CHChih-Sung Ho
Chih-Sung Ho
CLChih-Hsien Lai
Chih-Hsien Lai
YHYu-Hao Huang
Yu-Hao Huang
This study proposed a nonenzymatic sensor for lactic acid detection based on copper doped zinc oxide (CZO) modified by graphitic carbon nitride (g-C 3 N 4 ) and iron–platinum nanoparticles (FePt NPs). The silver paste electrodes of the sensor were prepared using screen printing technology, and the CZO sensing film was deposited using radio frequency (R.F.) sputtering system. The g-C 3 N 4 nanosheet solution was prepared through liquid exfoliating of the g-C 3 N 4 in water. The sensing film was modified by adding different contents of the FePt NPs in g-C 3 N 4 solution. The various concentrations of the FePt NPs were 0.03, 0.1, and 0.3 wt%. The ${V}$ – ${T}$ measurement system was applied to investigate the sensing characteristics of the lactic acid sensors based on CZO sensing film modified by g-C 3 N 4 and FePt NPs. The surface morphology of the sensor was analyzed by scanning electron microscope (SEM), X-ray diffraction (XRD), and dynamic light scattering (DLS). In this work, the 0.1 wt% FePt NPs-g-C 3 N 4 lactic acid sensor has the best sensitivity, linearity, response time, and the limit of detection (LOD).

28 January 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
Yu-Hsun NienYu-Hsun Nien
Yu-Hsun Nien
YWYi-Ting Wu
Yi-Ting Wu
Jung-Chuan ChouJung-Chuan Chou
Jung-Chuan Chou
CHChih-Sung Ho
Chih-Sung Ho
CLChih-Hsien Lai
Chih-Hsien Lai
RSRuei-Hong Syu
Ruei-Hong Syu
PbTiO 3 was used as a dopant and PbTiO 3 /titanium dioxide (TiO 2 ) nanofibers (NFs) were used as a scattering layer in the photoanode of dye-sensitized solar cell (DSSC). Their effects on the characteristics of the photoanode of DSSC were studied. The DSSC with the modified photoanode by PbTiO 3 and PbTiO 3 /TiO 2 NFs was characterized by X-ray diffractometer (XRD), electrochemical impedance spectroscopy (EIS), ${J}$ – ${V}$ characterization, and incident photon current efficiency (IPCE) measurement. The results show that PbTiO 3 and PbTiO 3 /TiO 2 NFs can improve the photovoltaic characteristics of DSSC photoanode. The DSSC with modified photoanode by PbTiO 3 /TiO 2 NFs shows better photoelectric conversion efficiency ( $\eta $ ). Compared with the DSSC without modification (TiO 2 photoanode), the photovoltaic conversion efficiency ( $\eta $ ) of the DSSC with modified photoanode by PbTiO 3 /TiO 2 NFs has increased by 19%. Based on this research, it can be considered that PbTiO 3 /TiO 2 NFs can be used as one of the candidate materials to improve the photovoltaic performance of DSSCs.