Due to the constantly growing geriatric population and the projected increase of the prevalence of chronic diseases that are refractory to drugs, implantable medical devices (IMDs) such as neurostimulators, endoscopic capsules, artificial retinal prostheses, and brain-machine interfaces are being developed. According to many business forecast firms, the IMD market is expected to grow and they are subject to much research aiming to overcome the numerous challenges of their development. One of these challenges consists of designing a wireless power and data transmission system that has high power efficiency, high data rates, low power consumption, and high robustness against noise. This is in addition to minimal design and implementation complexity. This manuscript concerns a comprehensive survey of the latest techniques used to power up and communicate between an external base station and an IMD. Patient safety considerations related to biological, physical, electromagnetic, and electromagnetic interference concerns for wireless IMDs are also explored. The simultaneous powering and data communication techniques using a single inductive link for both power transfer and bidirectional data communication, including the various data modulation/demodulation techniques, are also reviewed. This review will hopefully contribute to the persistent efforts to implement compact reliable IMDs while lowering their cost and upsurging their benefits.
31 July 2020 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper presents a wireless power and downlink data transfer system for medical implants operating over a single 10 MHz inductive link. The system is based on a Carrier Width Modulation (CWM) scheme for high-speed communication and efficient power delivery using a novel modulator circuit design. Unlike conventional modulation techniques, the data rate of the proposed CWM is not limited by the quality factors of the primary and secondary coils. The functionality of the new modulation method is proven using a hybrid implementation comprising a custom-integrated demodulator circuit and board-level discrete components. The proposed Wireless Power and Data Transfer (WPDT) system is also capable of operating under a wide range of data rates. It allows a maximum data rate of 3.33 Mb/s for a maximum power delivery of 6.1 mW at 1 cm coils separation distance. The system can recover more power, reaching 55 mW at 100 kb/s. Due to the system genericity, an operator can select the best compromise between power and data rates in accordance to application or current need, without reconfiguring the receiver. Another advantage of this modulation technique is the simple implementation and the ultra-low power consumption of the CWM demodulator despite its high-speed demodulation.
In this paper, we present a new Carrier Width Modulation (CWM) scheme for simultaneous transfer of power and data over a single inductive link. An ultra-low power CWM demodulator is also proposed. Unlike conventional demodulators for a similar modulation scheme, the proposed CWM circuit allows higher-speed demodulation and simple implementation. It works well as a generic demodulator operating at a frequency range between 10 and 31 MHz. It also supports a wide range of data rates under any selected frequency from the operating range. A CWM-based scheme encoding two-bit-per-symbol, called Quad-level CWM (QCWM) is also proposed. The latter allows high data-rates-to-frequency ratios. Using a 0.13-μm CMOS process and 1.2 V power supply, both CWM and QCWM demodulators were implemented and fabricated. They respectively occupy die sizes of 2137 and 3256 μm2 and dissipate, in worst conditions, 16.9 and 35.5 μW. Compared with state-of-the-art demodulators used for inductive forward data transmission, the proposed demodulators are distinctive given their low-energy efficiency and small silicon areas.
9 August 2018 in IEEE Transactions on Circuits and Systems II: Express Briefs
This brief relates to a novel approach for downlink data transmission based on a carrier-width modulation (CWM). This modulation technique offers high performances and allows simultaneous data and power transmission over a single 27.12-MHz inductive link. A CWM demodulator is designed and fabricated in 130-nm CMOS technology. The proposed demodulator is intended for implantable medical devices, but can be applicable to other wireless systems. Excellent measurement results are obtained in comparison with state-of-the-art demodulators used in inductive communication systems. The proposed demodulator that was designed, fabricated, and tested provides high data rates at an ultra-low power budget and a very small silicon area of 2100 μm 2 . More specifically, a data rate of 9.04 Mb/s can be achieved at a cost of only 13.68 μW power consumption. This represents an energy efficiency of 1.5 pJ/bit, which is 8 times smaller than the best state-of-the-art competitive demodulator.
DC-DC buck converters in automotive and aerospace applications are often required to handle large disturbances in their input supply and abrupt variations in their loads. This paper proposes a systematic method to combine input-voltage feedforward (IVFF) and voltage-mode feedback (VFB) controllers, aiming to enhance the closed-loop performance of these DC-DC converters. This method relies on the stability boundary locus approach to help select the proper control parameters that achieve strong dynamic stability across the full operating range regardless of practical implementation challenges. Also, an optimization approach is employed to minimize the passive components’ area within the compensator, achieving a 79% reduction in integration size compared to conventional designs. The controller was fabricated in a 0.35- $\mu \text{m}$ CMOS technology, occupying a core area of 0.438 mm2. The prototype chip was experimentally tested to regulate a buck converter that leverages an e-GaN half-bridge while operating at 1 MHz. Measurement results show a remarkable closed-loop performance against line and load variations, reaching up to ±80 V/ms and ±535 mA per 150 $\mu \text{s}$ , respectively. The output remains stable, showcasing very small (<100 mV) to non-existent spikes and fast recovery periods. In addition, the system shows fast startup times ( $ < 100\mu \text{s}$ ) with small overshoots (<1%) observed at the output. The system power efficiency, tested across various loads, peaks at 95.14% while operating at 695 mA load current. It is shown that the combined-controller approach entirely eliminates transient voltage spikes, offering up to 100% improvement in dynamic performance over a standalone VFB controller.