Jiahao Zhan

Jiahao Zhan

Auto-generated profile, based on publicly available information

Jiahao Zhan

University of Maryland

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 April 2021 in Optics Express
Verified
Journal Article
Open access
PDF file
JZJiahao Zhan
Jiahao Zhan
JBJoseph Brock
Joseph Brock
SVSylvain Veilleux
Sylvain Veilleux
MDMario Dagenais
Mario Dagenais
We present the design and experimental results of a novel polarization beam splitter (PBS) with a high polarization extinction ratio (PER) made on a Si3N4 platform. The PBS is composed of two identical polarization-independent multi-mode interferometers and two identical apodized Bragg gratings. The operating principle of this device is based on the fact that the TE and TM stopbands of the grating are centered at different wavelengths. The reflected and transmitted light from the gratings are routed to separate output ports by the two-MMI configuration. The experimental results show that a PER of > 30 dB is achieved over a bandwidth of 22 nm, with an insertion loss of ∼ 1.1 dB. The total length of the device is ∼ 820 µm.

12 July 2023 in Optics Express
Verified
Journal Article
Closed access
TBThomas Baehr-Jones
Thomas Baehr-Jones
SAShahab Ardalan
Shahab Ardalan
MCMatthew Chang
Matthew Chang
SJSaman Jafarlou
Saman Jafarlou
XSXavier Serey
Xavier Serey
MSMatthew Streshinsky
Matthew Streshinsky
We demonstrate a transmitter and receiver in a silicon photonics platform for O-band optical communication that monolithically incorporates a modulator driver, traveling-wave Mach-Zehnder modulator, control circuitry, photodetector, and transimpedance amplifier (TIA) in the GlobalFoundries Fotonix (45SPCLO) platform. The transmitter and receiver show an open 112 Gbps PAM4 eye at a 4.3 pJ/bit energy efficiency, not including the laser. Extensive use of gain-peaking enables our modulator driver and TIA to achieve the high bandwidths needed in the 45 nm CMOS-silicon photonics process. Our results suggest an alternative to the frequent approach of bump-bonding BiCMOS drivers and TIAs to silicon photonics.

6 May 2020 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
YHYi-Wen Hu
Yi-Wen Hu
SXShengjie Xie
Shengjie Xie
JZJiahao Zhan
Jiahao Zhan
YZYang Zhang
Yang Zhang
SVSylvain Veilleux
Sylvain Veilleux
MDMario Dagenais
Mario Dagenais
We report the design and characterization of a high performance integrated arbitrary filter from 1450 to 1640 nm. The filter's target spectrum is chosen to suppress the night-sky OH emission lines, which is critical for ground-based astronomical telescopes. This type of filter is featured by its large spectral range, high rejection ratio, and narrow notch width. Traditionally it is only successfully accomplished with fiber Bragg gratings. The technique we demonstrate here is proven to be very efficient for on-chip platforms, which can bring many benefits for device footprint, performance, and cost. For the design part, two inverse scattering algorithms are compared, the frequency domain discrete layer-peeling (f-DLP) and the time domain discrete layer-peeling (t-DLP). f-DLP is found to be superior for the grating reconstruction in terms of accuracy and robustness. A method is proposed to resolve the non-uniformity issue caused by the non-zero layer size in the DLP algorithm. The designed 55-notch filter is 50-mm-long and implemented on a compact Si 3 N 4 /SiO 2 spiral waveguide with a total length of 63 mm. Experimentally, we demonstrate that the device has a insertion loss as low as 2.5 dB, and that the waveguide propagation loss is as low as 0.10 dB/cm. We are also able to achieve uniform notch depths and 3-dB widths of about 28 dB and 0.22 nm, respectively.

1 June 2020 in APL Photonics
Verified
Journal Article
Open access
PDF file
JZJiahao Zhan
Jiahao Zhan
ZJZeinab Jafari
Zeinab Jafari
SVSylvain Veilleux
Sylvain Veilleux
MDMario Dagenais
Mario Dagenais
ILIsrael De Leon
Israel De Leon
Silicon nitride integrated photonic devices benefit from a wide working spectral range covering the visible and near-infrared spectra, which in turn enables important applications in bio-photonics, optical communications, and sensing. High-quality factor optical resonators are essential photonic devices for such applications. However, implementing such resonators on a silicon nitride platform is quite challenging due to the low refractive index contrast attainable with this material. Here, we demonstrate that silicon nitride photonic cavities comprising a slow-light waveguide bounded by mirrors can in principle exhibit quality factors in the order of several millions despite a relatively low refractive index contrast. We show that the energy stored in such a slow-light cavity exhibits a cubic dependence on the cavity length, which can enable extremely large quality factors with modest-length cavities. We present the design and experimental characterization of silicon nitride slow-light nanobeam-type cavities. Two sets of nanobeam cavities were fabricated to experimentally verify the cubic dependence of the Q factor on the cavity length. The highest measured Q factor in our devices is 4.42 × 105, which is limited by fabrication imperfections.

8 February 2023 in Optics Express
Verified
Journal Article
Closed access
JZJiahao Zhan
Jiahao Zhan
YZYang Zhang
Yang Zhang
WHWei-Lun Hsu
Wei-Lun Hsu
SVSylvain Veilleux
Sylvain Veilleux
MDMario Dagenais
Mario Dagenais
To provide a solution to the issue of the non-flat focal surface in traditional Rowland AWGs, we have designed and implemented a Si3N4 three-stigmatic-point arrayed waveguide grating (TSP AWG) with three inputs, and a spectral resolving power over 17,000 has been achieved experimentally. The flat focal surface of this AWG can accommodate a butt-coupled detector array positioned at the output facet without any reduction of the resolving power of the edge channels. Therefore, it is particularly advantageous to some astronomical applications which require an AWG as a light-dispersing component to obtain a complete 2D spectrum. As a proof-of-concept for next generation devices, the multi-input aspect of the design accommodates multiple single-mode fibers coming into the AWG. In addition, because the device is implemented on a high-index-contrast platform (Si3N4/SiO2), a compact size of ∼9.3 × 9.3 mm2 is achieved.

18 November 2019 in Journal of the Optical Society of America B
Verified
Journal Article
Closed access
PDF file
JZJiahao Zhan
Jiahao Zhan
YZYang Zhang
Yang Zhang
YHYiwen Hu
Yiwen Hu
SXShengjie Xie
Shengjie Xie
SVSylvain Veilleux
Sylvain Veilleux
MDMario Dagenais
Mario Dagenais
We present experimental and simulation results of sidewall Bragg gratings (BGs) implemented on a silicon nitride waveguide platform, with emphasis on the appreciable drop of transmission on the high-frequency side of the grating stopband due to the coupling into backward cladding/radiative modes. We differentiate this from the coupling into backward slab modes as observed in BGs implemented in silicon-on-insulator ridge waveguides. The dimension of the device top cladding affects the shape of the drop pattern. Different approaches for circumventing this drop pattern are discussed. A better understanding of this physical phenomenon will help guide the design of BGs on integrated photonic platforms.