13 March 2020 in ACS Photonics
12 December 2018 in Optics Letters
We present a silicon nitride/silicon dioxide add–drop filter operating on arbitrarily spaced channels using multimode interferometers (MMIs) and complex waveguide Bragg gratings (CWBGs). The add–drop filter shows a rejection ratio of on all five channels, with a line width of 1.2 nm and an on-chip loss of . By designing the CWBG with the Layer Peeling/Layer Adding algorithm, this MMI-CWBG add–drop filter platform has the capability for ultrabroadband add–drop operation on arbitrarily spaced channels.
20 June 2022 in IEEE Photonics Journal
On-chip high extinction ratio Mach-Zehnder interferometers (MZI) have always attracted interest from researchers as it can be used in many applications including astrophotonics, optical switching, programmable photonic circuit, and quantum information. However, in previous research studies, ultra-high extinction ratio on-chip MZIs have only been achieved by using a multi-stage MZI approach. In this paper, we investigate a high extinction ratio single-stage MZI based on two cascaded multimode interferometers (MMI). We determine that TM noise is an important factor that can prevent us from achieving high extinction ratio MZI. By introducing a bend-based TM filter without additional loss, we experimentally demonstrate that such a TM filter can improve the maximum extinction ratio of the MMI-MZI by more than 10 dB. With the TM filter, we report a record high 61.2 dB extinction ratio on a single stage, thermally tunable MMI-MZI with only 1.5 dB insertion loss and more than 60 nm bandwidth. These results pave the way for many interesting applications.
16 November 2018 in IEEE Photonics Journal
6 May 2020 in Journal of Lightwave Technology
We report the design and characterization of a high performance integrated arbitrary filter from 1450 to 1640 nm. The filter's target spectrum is chosen to suppress the night-sky OH emission lines, which is critical for ground-based astronomical telescopes. This type of filter is featured by its large spectral range, high rejection ratio, and narrow notch width. Traditionally it is only successfully accomplished with fiber Bragg gratings. The technique we demonstrate here is proven to be very efficient for on-chip platforms, which can bring many benefits for device footprint, performance, and cost. For the design part, two inverse scattering algorithms are compared, the frequency domain discrete layer-peeling (f-DLP) and the time domain discrete layer-peeling (t-DLP). f-DLP is found to be superior for the grating reconstruction in terms of accuracy and robustness. A method is proposed to resolve the non-uniformity issue caused by the non-zero layer size in the DLP algorithm. The designed 55-notch filter is 50-mm-long and implemented on a compact Si 3 N 4 /SiO 2 spiral waveguide with a total length of 63 mm. Experimentally, we demonstrate that the device has a insertion loss as low as 2.5 dB, and that the waveguide propagation loss is as low as 0.10 dB/cm. We are also able to achieve uniform notch depths and 3-dB widths of about 28 dB and 0.22 nm, respectively.
18 November 2019 in Journal of the Optical Society of America B
We present experimental and simulation results of sidewall Bragg gratings (BGs) implemented on a silicon nitride waveguide platform, with emphasis on the appreciable drop of transmission on the high-frequency side of the grating stopband due to the coupling into backward cladding/radiative modes. We differentiate this from the coupling into backward slab modes as observed in BGs implemented in silicon-on-insulator ridge waveguides. The dimension of the device top cladding affects the shape of the drop pattern. Different approaches for circumventing this drop pattern are discussed. A better understanding of this physical phenomenon will help guide the design of BGs on integrated photonic platforms.