3 August 2018 in Metrologia
9 April 2014 in IEEE Transactions on Electromagnetic Compatibility
In this paper, we study statistical methods for estimating the Rician K-factor when this parameter is small. A fiducial approach for making statistical inference on the K-factor is discussed. The approach requires a Monte Carlo method to compute the uncertainty of a K-factor estimate. Simulation and measurement studies are carried out to evaluate the performance of the proposed procedure and compare it with some of the existing procedures. A procedure for assessing the adequacy of the estimation of the K-factor via quantile plots is presented.
30 January 2014 in Measurement Science and Technology
Diverse measurement contexts require estimates of time-varying quantities. Ideally the measurement device responds to signal variations more rapidly than the modulation of the signal itself. If so, then well-developed techniques may be used for the calibration and analysis of the measurement system. By contrast, as the characteristic timescales for signal modulation and measurement response become commensurate, the situation becomes more complicated; directly measured quantities may require correction for the finite bandwidth of the measurement system response. Toward this goal heuristic estimation rules have evolved over time and are now widely used. We rederive these common rules of thumb, and present sufficient conditions for their validity. Furthermore, we investigate their quantitative performance in cases for which these conditions are violated and encounter surprisingly poor results. As an alternative, we demonstrate that regularized deconvolution analysis exhibits more general quantitative utility at the expense of increased measurement burden and analytical complexity.
18 April 2022 in IEEE Microwave and Wireless Components Letters
We report a monolithic microwave integrated-circuit (MMIC) comb generator capable of producing a repetitive narrow pulse (7.1 ps pulse duration) with sharp edges (4.2 ps falling time). The circuit was designed in a 250 nm indium phosphide (InP) heterojunction bipolar transistor (HBT) technology using differential pairs. We characterized the output signal with a 110 GHz sampling oscilloscope and de-embedded the band-limited frequency spectrum of the pulse in the circuit reference plane. We measured a pulse duration of 7.1 ps and a peak amplitude of -0.333 V. In the frequency domain, the comb generator provided -48.7 dBm of output power at 110 GHz when the circuit is fed with a 1 GHz input signal.