9 April 2018 in IEEE Transactions on Electron Devices
This paper focuses on the time-dependent breakdown of the AlGaN/GaN Schottky barrier diodes with a gated edge termination (GET) submitted to high-voltage stress. The impact of the GET structure, the passivation layer thickness, and a preclean process (sulfuric acid and hydrogen peroxide mixture + ammonia and hydrogen peroxide mixture) before the GET layer deposition on the time to breakdown t BD is analyzed. Initially, a reference structure with a single-GET structure, a thick passivation layer and excellent performance under dc, and pulse characterization is submitted to stress. The results show that the time to failure follows a Weibull distribution with high shape parameter values (β ~ 3 and/or β ~ 5) related to intrinsic failure mechanisms. The exponential dependence of tBD on the stress voltage suggests a degradation driven by the electric field, while lower thermal activation energies indicate that temperature acts as a weak acceleration factor. A more uniform distribution of the electric field-by adding an additional peak (double-GET structure) or with more equilibrated peaks (thin passivation structure)-and a more aggressive preclean process before the GET layer deposition improves the breakdown voltage and prolongs the device lifetime.
1 June 2017 in Microelectronic Engineering
27 January 2020 in IEEE Transactions on Device and Materials Reliability
This article aims to study the degradation of Schottky Barrier Diodes (SBDs) with a Gated Edge Termination (GET) under ON-state stress conditions. After all the stress experiments a recoverable behavior is observed, which indicates charge trapping in pre-existing defects and no creation of new traps. A broad statistical analysis demonstrates better reliability and a longer lifetime compared to previous works in a 200-V technology. Some systematic differences in parameter degradation are observed depending on wafer location, likely caused by process-related variations. By using matched pairs (MPs) technique, we have demonstrated that probability distributions characterized by single Weibull slopes can be obtained over the wafer that could allow better characterization of the intrinsic reliability of these devices.
1 January 2019 in IEEE Transactions on Electron Devices
30 June 2026 in Physics Letters B