1 January 2013 in Ingeniería e Investigación
This paper presents an extensive review of the pertinent literature regarding asphalt and asphalt mixture aging. Aging affects flexible pavement performance and is produced by intrinsic and extrinsic variables as well as exposure time. Intrinsic variables include asphalt and aggregate properties, a mixture's asphalt content, binder film thickness and air void content; extrinsic variables are associated with production (short-term aging) and exposure to environmental field conditions (long-term aging). Taken together, both variables demonstrate that aging results from three distinct mechanisms: volatilisation, oxidation and steric hardening. Temperature, pressure and photo degradation treatments are used to simulate aging in the laboratory and empirical and semi-empirical models are created to represent and study aging. Aging increases asphalt complex modulus and decreases the phase angle. Mixtures become stiffer while fatigue life becomes reduced. Carbonyl and sulfoxide group formation in asphalt are often studied as such chemical changes show oxidation in aged asphalts. The prevailing models used to predict asphalt aging are discussed, though more comprehensive research into asphalt aging is still needed.
24 September 2022 in Journal of Traffic and Transportation Engineering (English Edition)
1 October 2018 in Journal of Materials in Civil Engineering
Blast furnace slags (BFS) have interesting physical properties and chemical compositions for the production of mastics in asphalt mixtures. However, most of the studies conducted on this material and their applications in asphalt mixtures have been as substitutes for the coarse fraction of natural aggregates (NGA). In the present study, an experimental program was devised to evaluate the effect on the resistance of a hot mix asphalt (HMA), due to the replacement of fine fraction of a NGA by a BFS. The mechanical properties investigated were indirect tensile strengths, resilient modulus, permanent deformation, resistance to fatigue, and moisture damage. Analysis of variance (ANOVA) tests were performed to verify or reject the null hypothesis that the results are statically equal to those of the reference mixture. X-ray diffractometry (XRD) and X-ray fluorescence (XRF) tests were carried out on particles of BFS and NGA. Additionally, the samples were subjected to imaging processing in a scanning electron microscope (SEM). Characterization tests (viscosity, softening point, penetration, and indirect tension) were performed on mixtures made of fine particles (NGA and BFS) and asphalt. The BFS used as fine aggregate tends to generate, in conjunction with asphalt, a material with improved properties of resistance under monotonic and dynamic load.
28 June 2016 in International Journal of Pavement Engineering
In Central and South America, pavement deterioration due to moisture is high. The deterioration is directly related to the compatibility between the asphalt and aggregates, as well as the cohesiveness of the asphalt matrix. The affinity between these materials affects how well the bond will behave in the presence of water, and therefore the susceptibility of the asphalt mixture to moisture in the long term. It is well accepted that traditional tests for assessing moisture damage are not necessarily representative of high moisture conditions, such as those present in Colombia and Costa Rica. Therefore, it is imperative that methods to quantify the actual moisture susceptibility of hot-mix asphalt be adopted and implemented in local specifications. In order to characterise the true adhesion properties of regional materials, both physicochemical and mechanical analysis has been implemented to determine the moisture susceptibility of different binder–aggregate combinations typically used in Costa Rica and Colombia. The effect of antistrip additives on the water resistance of such combinations was also evaluated. The asphalt bond strength test was applied to mechanically determine the adhesive and cohesive strength of the binder–aggregate pairs. In addition, the measurement of physicochemical properties such as surface free energies of aggregates and binders allowed the determination of work of adhesion, cohesion and debonding of asphalt from the aggregate surface in the presence of water. A correlation between the physicochemical and the mechanical properties was found for most of the cases.