We report on and emphasize the versatility of conductive atomic force microscopy in characterizing vertically aligned carbon nanotubes (CNTs) aimed to be used in via interconnect technology. The study is conducted on multi-walled CNT arrays vertically grown on a copper-based metal line. Voltage-dependent current mapping and current–voltage characteristics recorded down to single CNT allow for a comprehensive insight into the electric behaviour of the hybrid structure.
Magnetic sensors are key elements in many industrial, security, military, and biomedical applications. Heusler alloys are promising materials for magnetic sensor applications due to their high spin polarization and tunable magnetic properties. The dynamic field range of magnetic sensors is strongly related to the perpendicular magnetic anisotropy (PMA). By tuning the PMA, it is possible to modify the sensing direction, sensitivity and even the accuracy of the magnetic sensors. Here, we report the tuning of PMA in a Co2MnGa Heusler alloy film via argon (Ar) ion irradiation. MgO/Co2MnGa/Pd films with an initial PMA were irradiated with 30 keV 40Ar+ ions with fluences (ions·cm−2) between 1 × 1013 and 1 × 1015 Ar·cm−2, which corresponds to displacement per atom values between 0.17 and 17, estimated from Monte-Carlo-based simulations. The magneto optical and magnetization results showed that the effective anisotropy energy (Keff) decreased from ~153 kJ·m−3 for the un-irradiated film to ~14 kJ·m−3 for the 1 × 1014 Ar·cm−2 irradiated film. The reduced Keff and PMA are attributed to ion-irradiation-induced interface intermixing that decreased the interfacial anisotropy. These results demonstrate that ion irradiation is a promising technique for shaping the PMA of Co2MnGa Heusler alloy for magnetic sensor applications.
17 March 2021 in Journal of the Royal Society of New Zealand
This manuscript outlines current research activities based on ion beam science at GNS Science in New Zealand. Ion beam analysis methods include Rutherford backscattering and nuclear reaction analysis which trace back to Rutherford's famous ‘gold foil’ and ‘splitting the atom’ experiments. These ion beam‐based methods generally offer the ability to analyse materials for every element of the periodic table, to ppm concentrations, and with depth profiles ranging from a few nm to several microns. Ion beam methods are now also used to modify and create new materials precisely. Rutherford's early research now has a legacy at GNS Science's Materials team to discover, design, and develop materials for energy efficient modern applications for a low carbon future. These include magnetic sensors for security products, nanostructured magnetic materials for energy conversion, thermoelectric devices for energy harvesting, and catalytic development for clean energy carriers and energy efficient communication devices.