The review provides an up-to-date overview and discussion of phenomena related to positive streamer breakdowns in short uniform and non-uniform field (corona) gaps. The terminology used to specify different types of streamer phenomena is critically discussed in light of a unified theory of high-pressure gas discharges describing the sequence of ionization events from initial electron avalanches up to a partial or complete breakdown. The emphasis is given to the understanding of the formation of an active cathode spot by the streamer arrival to the cathode, which is the critical but still obscure phase of the breakdown development. Based on the analysis including a computer simulation model a hypothesis is advanced that also such widely studied and practically important gas discharge phenomena as negative corona Trichel pulses and fast ionization instabilities in cathode regions of high-pressure gas discharges are due to the formation of positive streamers in the immediate cathode vicinity. The proposed hypothesis offers attractive feature of the unification of a wide scale of high-pressure gas discharges within the general class of positive streamer initiated breakdown phenomena. Moreover, it provides indications for further study in the field both by experiment and computer simulations.
The work is focused on the study of surface plasma treatment (DCSBD) of films from biodegradable polymers from renewable sources based on polylactic acid (PLA) and polyhydroxybutyrate (PHB). A 4-factor design of experiment was used where the selected variable parameters were the plasma device power, the time of plasma treatment, the ratio of PHB in the polymer blend with PLA, and the content of acetyl tributyl citrate (ATBC) plasticizer in the PLA + PHB blend. The surface total energy and the polar component were evaluated immediately after surface plasma treatment and after 5 h of sitting. Topography of foil surfaces was also studied by AFM. In terms of plasma power and activation time, the greatest increase in surface energy values was observed with a short plasma time of 2 s and a high power of 400 W. Increasing the content of ATBC in interaction with the high concentration of PHB in the blend results in a reduction in the difference of both the polar component and the total free surface energy.
29 September 2020 in Journal of Physics D: Applied Physics
In the current work, we studied the effect of multiphasic dielectric material on coplanar dielectric barrier discharge. To enhance the application potential of standard alumina ( ) ceramic barriers, composite materials composed of immiscible and Mg-spinel ( ) phases were prepared and investigated. The effect on coplanar dielectric barrier discharge was studied in a broad concentration profile of the composite materials ranging from 0 to 100 vol.% in an alumina matrix. The study was mainly focused on the determination of ignition voltage as a crucial parameter for industrial applications. The minimum ignition voltage was found in the ceramic composite with 15 vol.% . We also noticed differences in plasma filament localization on the ceramic surfaces of different composites. This work also brings comprehensive investigation of the electrical and microstructural properties of this biphasic barrier material. Detailed investigation revealed that the ignition voltage was a nontrivial combination of both bulk (phase and chemical compositions) as well as surface (phase distribution, grain size, surface roughness) properties of the barrier materials.