Zhe Zhao

Zhe Zhao

Auto-generated profile, based on publicly available information

Zhe Zhao

Department of Electrical Engineering, University of Arkansas, Fayetteville, AR, USA

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 April 2023 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
FDFei and company (john Diao
Fei and company (john Diao
XDXinyuan Du
Xinyuan Du
ZMZhuxuan Ma
Zhuxuan Ma
YWYuheng Wu
Yuheng Wu
Feng GuoFeng Guo
Feng Guo
YZYue Zhao
Yue Zhao
This paper presents the design and development of a megawatt-scale medium-voltage (MV) hybrid inverter prototype to validate its feasibility and potentials for the electric propulsion on the next-generation electric aircraft system with an onboard MV dc distribution, e.g., 3 kV dc bus in this work. The proposed hybrid converter consists of a three-level active-neutral-point-clamped (ANPC) stage using 3.3 kV silicon IGBTs cascaded with an H-bridge stage using cost-effective 1.2 kV SiC MOSFETs in each phase. Comprehensive design and evaluation of the full-scale prototype are elaborated, including the low-inductance busbar design, converter architecture optimization and system integration. In addition, a low computational cost space vector modulation with common-mode voltage (CMV) reduction feature is proposed to fully exploit the benefits of SiC MOSFET in this hybrid topology. Extensive simulation and experimental results are provided to demonstrate the performance of each power stage and the full converter assembly in both the steady-state operation and variable frequency operations. Compared with the widely adopted IGBT based ANPC converter in MV applications, the proposed 7-L hybrid inverter system features higher power efficiency, reduced harmonics, higher dc voltage utilization, reduced CMV and lower dv/dt, while remains cost effective compared to the solution using MV SiC MOSFETs.

23 March 2022 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
ZZZhe Zhao
Zhe Zhao
YWYuheng Wu
Yuheng Wu
FDFei and company (john Diao
Fei and company (john Diao
NLNan Lin
Nan Lin
XDXinyuan Du
Xinyuan Du
GZGuangqi Zhu
Guangqi Zhu
The rapid development of more electric aircraft (MEA) raises the demand for high-power converters with significant weight and volume reduction for onboard power distribution. The isolated dc/dc converter using the medium-frequency transformer (MFT) is a feasible solution. To design an MFT with improved electromagnetic and thermal performance, a matrix core transformer (MCT) architecture is proposed with accurate models in this article. With superior heat dissipation ability, the high current windings can be effectively cooled with both natural and forced air convection. In addition, an optimization methodology for MCT design is presented. As a result, the prototype of a 100-kW, 50-kHz MCT with an additive manufactured bobbin is built. The results of both finite element analysis (FEA) simulation and experimental study in a full power dual active bridge (DAB) with the MCT prototype are presented to verify the theoretical design. The power density and efficiency of the MCT reach 17.7 kW/L and 99.63%, respectively.

18 July 2022 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
XDXinyuan Du
Xinyuan Du
FDFei and company (john Diao
Fei and company (john Diao
ZZZhe Zhao
Zhe Zhao
YZYue Zhao
Yue Zhao
In this work, an all silicon carbide (SiC) series-resonant converter (SRC) design is proposed and demonstrate to achieve a single stage dc-to-dc conversion from 3kV to 540V (±270V) for future electric aircraft applications. The proposed SRC consists of a neutral-point-clamped (NPC) converter using 3.3kV SiC MOSFETs on the primary side, a H-bridge converter using 900V SiC MOSFET on the secondary side and a high frequency (HF) transformer. The detailed design methods for the SRC power stage and the HF transformer are presented. Especially, a tradeoff between the complexity for the cooling system and the need for high power density and voltage insulation is addressed in the transformer design, leading to a novel multi-layer winding structure design to enhance the insulation capability and also the mechanical robustness. The proposed bobbin design is realized using additive manufacturing. The detailed analysis and modeling of the parasitic capacitance between sections introduced by fringe electrical field is presented. To validate the effectiveness of the proposed SRC design, a 25kW converter prototype using 3.3kV SiC discrete devices has been developed with a peak efficiency of 99.08% achieved in experimental studies.

8 November 2021 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
NLNan Lin
Nan Lin
ZZZhe Zhao
Zhe Zhao
FDFei and company (john Diao
Fei and company (john Diao
YZYue Zhao
Yue Zhao
JBJuan Carlos Balda
Juan Carlos Balda
Due to its frequent occurrence in the electric vehicle (EV) and hybrid electric vehicle (HEV) applications, light-load efficiency of the dc–dc converter is critical. Different from the conventional boost converter, in this work, a novel composite converter is proposed and investigated to achieve significantly improved light-load efficiency. The proposed converter consists of a current-fed dual-half-bridge (CF-DHB) converter module and a boost converter module, which can be controlled and optimized independently. The interconnection of the two modules leads to advantages, such as lower voltage stress across the power device and a wide conversion ratio. In this article, a multi-variable efficiency optimization method is proposed utilizing the topology advantages of the proposed converter to address the light-load efficiency issue. Based on the loss model, the power sharing between the two converter modules and the switching frequency of the boost converter module are optimized at light load. A 30-kW silicon carbide (SiC)-based composite dc–dc converter prototype is built to validate the proposed multi-variable efficiency optimization method in the light-load operating conditions. Extensive experimental results are presented to demonstrate the noticeable efficiency improvement brought by the proposed method.

20 March 2022
Verified
Conference Paper
Closed access
ZZZhe Zhao
Zhe Zhao
YWYuheng Wu
Yuheng Wu
FDFei and company (john Diao
Fei and company (john Diao
NLNan Lin
Nan Lin
XDXinyuan Du
Xinyuan Du
YZYue Zhao
Yue Zhao
In this work, the analytical models and optimization procedure for the design of high-power matrix core transformer (MCT) aiming at isolated DC/DC converter applications, especially for dual active bridge (DAB) converters, are proposed. The loss models, leakage inductance and thermal network models of MCT are presented, and a multi-variable, multi-objective optimization methodology of MCT is proposed. A 100 kW/50 kHz MCT design is selected and prototyped based on the optimization results. An additive manufactured bobbin design is also presented to control the leakage inductance and the path of the airflow. The electrical, magnetic, and thermal performance of the prototype are validated using by experimental studies.

20 April 2026 in Future Science OA
Verified
Journal Article
Open access
JLJingxin Li
Jingxin Li
CMChangliang Ma
Changliang Ma
WJWenting Jiang
Wenting Jiang
XCXiaoqiang Chen
Xiaoqiang Chen
JLJianquan Liu
Jianquan Liu
ZDZhiqin Deng
Zhiqin Deng
Chondrocyte hypertrophy is a pivotal biological process in skeletal development and disease progression, with its precise regulation being essential for maintaining cartilage homeostasis and promoting tissue repair. This review systematically summarizes the molecular mechanisms of chondrocyte hypertrophy and its roles in both physiology and pathology, with a focus on its central involvement in osteoarthritis (OA), growth plate dysplasia, and heterotopic ossification. Key signaling pathways, including RUNX2, BMP, Wnt/β-catenin, and PTHrP, orchestrate hypertrophy through intricate crosstalk. Conversely, inhibitory factors such as SOX9, HIFs, and miRNAs preserve chondrocyte phenotype stability. Pathologically, dysregulated hypertrophy drives cartilage matrix degradation, metabolic reprogramming, and pro-inflammatory microenvironments, thereby exacerbating OA progression. Single-cell omics has unveiled cellular heterogeneity in OA cartilage, and innovative biomaterials combined with stem cell therapies offer promising regenerative approaches. However, limitations persist in understanding pathway interactions, replicating in vivo complexity in vitro, and translating findings to clinical applications. Future research should integrate multidisciplinary technologies to develop precise therapeutic strategies, advancing the treatment of cartilage-related disorders. This review is designed as a narrative review, aiming to systematically synthesize the molecular mechanisms, pathophysiological roles, and therapeutic implications of chondrocyte hypertrophy.