11 June 2019 in IEEE Transactions on Power Electronics
State-of-the-art silicon carbide (SiC) power devices provide superior performance over silicon devices with much higher switching frequencies/speed and lower losses. High switching speed is preferred for achieving low switching loss, yet high dv/dt and di/dt can result in high EMI emission during switching transients. These switching dynamics can be controlled by the device gate driving strategy. The multi-level active gate driver (AGD) approach is able to tradeoff the switching losses with the dv/dt and di/dt for each switching transient. A novel three-level (3-L) AGD for SiC power mosfet trajectory control is introduced. Its turn-off profile has a shorter turn-off delay compared to any existing methodology. Accordingly, a comprehensive datasheet-driven trajectory model for the online model-based optimization of the 3-L turn-off is introduced. The main factors that impact the 3-L turn-off performance are analyzed with this model. The experimental results of double pulse tests validate the approach. Additionally, the benefits of the proposed 3-L AGD method over two-stage turn-off and conventional gate drivers on the market are illustrated through experiments.
13 June 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Using silicon carbide (SiC) power devices can potentially improve the efficiency of the power electronic system, but it may also introduce severe electromagnetic interference (EMI) problems due to the fast switching speed. The conventional gate driver cannot provide the flexibility to adjust the switching speed of SiC dynamically. To address this issue, an intelligent versatile active gate driver (AGD) is proposed to achieve an optimized switching trajectory for power devices. The proposed AGD has five operation modes, i.e., faster/normal/slower the turn-on process and slower/normal turn-off process. The availability of multiple operation modes offers an extra freedom to improve the switching performance and enable it to be versatile. The proposed AGD can provide more switching speed adjustment resolution than the other AGDs and this feature will allow the proposed AGD to fine tune the switching speed of SiC power devices. In addition, a novel model-based trajectory optimization strategy is proposed to determine the optimal gate driver output voltage by trading the EMI noise against the switching energy losses. The functionalities of the multi-level AGD are validated with the experimental results. The hardware design consideration is also given for the product commercialization purpose.
29 May 2020 in IEEE Transactions on Power Electronics
The silicon carbide (SiC) devices have faster switching speed than that of the conventional silicon (Si) devices, which however may cause excessive device voltage overshoot. Larger gate resistance can help to restrain the overshoot, it however slows down the switching speed and increases switching losses. There are other methods that can mitigate the voltage overshoot, e.g., using low-inductance busbars, adding snubber circuits, etc. In this article, the busbar design for a 250-kW SiC three-level T-type inverter is investigated. The current commutation loops (CCLs) are first analyzed using a single-phase equivalent circuit. Then the detailed busbar design methods, especially a 3-D busbar design concept, are proposed to select the optimal stacking order for the multilayer laminated busbar and to address constraints posed by the physical terminal arrangements of SiC modules and dc-link capacitors. The stray inductance in each CCL is extracted via a finite element analysis and validated on the actual inverter busbar prototypes using an impedance analyzer. To further minimize the busbar stray inductance, a hybrid busbar structure with printed circuit board based buffer circuit using high-frequency decoupling capacitors is designed and evaluated in this article. Finally, the effectiveness of the designed busbars as well as the buffer circuit are validated using experimental studies.
22 June 2021 in IEEE Open Journal of Industry Applications
This paper presents a performance investigation and design optimization of a high efficiency three-level Active Neutral Point Clamped (ANPC) inverter topology using hybrid Si/SiC switches. It uses a modulation strategy that produces a cluster of low frequency switches commutating at fundamental line frequency (realized with Si IGBTs) and high frequency switches commutating at carrier frequency (realized with hybrid Si/SiC switches) to facilitate a tradeoff between the inverter efficiency and cost. A generalized Si/SiC current rating ratio optimization algorithm is presented for the hybrid Si/SiC switches based on the power loss profile of ANPC inverter. This algorithm determines the optimal current rating ratio between the Si IGBT and SiC MOSFET for the hybrid Si/SiC switches based on the inverter operating specification and Si/SiC gate control technique to achieve the best tradeoff between cost, loss and reliability. The proposed ANPC inverter system achieves higher efficiency compared to an all Si IGBT ANPC inverter system, an all SiC MOSFET ANPC inverter system and mixed Si IGBT and SiC MOSFET ANPC inverter system while it has lower cost compared to an all SiC MOSFET based ANPC inverter system and the mixed SI IGBT and SiC MOSFET based ANPC inverter systems.
17 November 2017 in IEEE Transactions on Industrial Electronics
In constant-voltage constant-frequency (CV CF) pulsewidth modulation (PWM) dc-ac inverters, the lumped disturbance, including the parameter uncertainties, unmodeled dynamics, and nonlinear loads, will deteriorate the performance and cause high harmonic distortions, or even result in instability. Conventional disturbance observer (CDOB), in which a low-pass Q filter is adopted to estimate the lumped disturbance, cannot completely eliminate the harmonics. While the conventional repetitive control (CRC) can attenuate the harmonics by using the error signal of previous period(s), that may result in slow transient response due to nonperiodic components in the tracking error during the transient state. In this paper, an internal model-based disturbance observer (IM-DOB) is proposed and has been applied in a CVCF PWM inverter to improve the control performance. In IM-DOB, a novel IM-based disturbance estimation observer is proposed to estimate the disturbance both in the low-frequency region and at harmonic frequencies, while compensation filters are introduced to enhance the robustness and stability. The IM-DOB scheme, which fuses the merit of CDOB and CRC, is actually a two-degree-of-freedom scheme. The stability analysis and a design case are also given. Comparative experiments are conducted to demonstrate the effectiveness of the proposed scheme.
15 June 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The finite-control-set model predictive control (FCSMPC) has been widely studied to control voltage source converters (VSCs) due to its fast-dynamic response and robustness. To design an FCS-MPC for a three-level VSC, it is necessary to design a multi-objective cost function, which usually consists of a term dedicated to control the neutral-point voltage (NP-V) of the VSC dc-link. Nevertheless, selecting weighting factors for the multiple control objectives is time consuming. To address this issue, this paper proposes a new FCS-MPC, which only uses voltage vectors and virtual voltage vectors that do not affect NP-V, such that an inherent dc-link voltage balancing can be achieved. The proposed approach does not only simplify the controller design by using a simplified cost function, which significantly reduce the execution time of the MPC, but also eliminate the voltage and current sensors for the dc-link. Moreover, the proposed MPC can improve the quality of VSC output waveforms. Simulation studies are carried out to verify the superiority of the proposed MPC over the existing ones. The effectiveness of the presented FCS-MPC is also experimentally validated on a T-type converter prototype.