17 February 2025 in Applied Physics Letters
Single magnetic domain soft magnetic films are the basis for many magnetic field sensing applications. The absence of magnetic domain walls reduces magnetic noise, which is relevant for magnetic sensing layers and supporting structures such as magnetic shields and flux concentrators. Here, the use of wafer-level integrated NdFeB micromagnets for on-chip field biasing of soft magnetic submicrometer thick layers for magnetic domain control is presented. Effective bias field strengths are modeled and experimentally evaluated using a magnetooptical indicator film technique. Single magnetic domain behavior in the soft magnetic layers is demonstrated. Effects of the granular micromagnet structure on the magnetic field homogeneity are discussed. The demonstrated integrated magnetic biasing scheme is applicable to various magnetic layer-based field sensing devices benefiting from single magnetic domain behavior.
16 January 2025 in Journal of Micromechanics and Microengineering
MEMS environmental sensors, including pressure, gas, and humidity sensors, require protection from mechanical damage, particle exposure, and condensing moisture, while maintaining their ability to exchange gases with the environment. This work introduces a novel packaging approach for MEMS environmental sensors using substrate-embedded filters made from microfine powders through PowderMEMS® microfabrication technology. The study demonstrates the successful fabrication of gas permeable, functionalized PowderMEMS® filters on 200 mm Si-wafers for wafer-level packaging of MEMS environmental sensors. Utilizing complete Si-wafers allows for all MEMS sensors on a device wafer to be packaged in a single substrate bonding step, followed by die singulation. The processed wafers are shown to be compatible with high-temperature glass-frit substrate bonding. Alternatively, individual chips with PowderMEMS® filters can be assembled discretely onto standard semiconductor packages to serve as gas-permeable filters. Successful hydrophobation of the inherently hydrophilic PowderMEMS® structures by deposition of hydrophobic nanofilms is demonstrated and resistance to water ingress is evaluated by immersion testing. Given that many MEMS gas sensors are cross-reactive to oxidizing gases like ozone, this study also explores the integration of ozone-degrading catalytic powder into the PowderMEMS® filters. As a proof-of-concept, commercial MEMS ozone sensors are modified with catalytic PowderMEMS® caps, and successful ozone degradation is demonstrated. While PowderMEMS® processing is typically conducted on 200 mm Si-wafers, other suitable substrates include glass and (fiber-reinforced) polymers.
18 September 2025 in IEEE Sensors Journal
Magnetic field sensors based on magneto resistive (MR) effects are fundamental components in numerous fields of application, like automotive or consumer electronics. Among them, sensors making use of the anisotropic MR effect (AMR) are in widespread use as they are inexpensive, consume low power and offer a high bandwidth from DC up to MHz. The magnetization of the ferromagnetic MR layer is commonly biased either by integration of an antiferromagnetic layer within the AMR stack or externally by means of coils or permanent magnets. Up to now, the latter approach demanded space in the sensor module and required precise discrete assembly of the external magnets. In this work, Nd-Fe-B permanent magnets are integrated in the substrate of commercial AMR devices (ADK769, Sensitec) to create customized local bias fields. The magnets are realized with the PowderMEMS® micromanufacturing technique on wafer level after processing of the AMR devices on the frontside. Magnetic measurements confirm the correct in-plane bias field strength of Hx=3.1 kA/m and thermal robustness of the magnets. The AMR devices featuring integrated magnets are assembled in a commercial current sensor design. The performance and robustness of the modified current sensor are comparable to the commercial version. The PowderMEMS® integration is scalable, avoids discrete assembly of the magnets and enables further miniaturization of the sensor module, potentially reducing packaging size and manufacturing costs. The demonstrated approach can be applied to various other microelectronic systems and MEMS whenever precise local magnetic fields are required.
19 September 2025 in IEEE Sensors Letters
This letter presents a pilot evaluation of a microelectromechanical-system (MEMS) cantilever resonator with monolithically integrated NdFeB magnets at its tip for compact generation of a time-dependent magnetic field. By applying a low-amplitude sinusoidal voltage with a predefined frequency to a piezoelectric layer, the cantilever is driven at its mechanical resonance, causing the embedded magnets to oscillate in space, resulting in a time-varying magnetic flux density. A prototype device is characterized for the first time by a superconducting quantum interference device magnetometer inside a magnetically shielded room only for evaluation purposes. A magnetic performance factor is introduced, which relates device design aspects to experimental observables and allows for the comparison of different devices. The results enable us to outline optimization steps toward robust, low-power MEMS-based magnetic field markers for biomagnetic sensing applications, industrial sensing, and magnetic measurement platforms where conventional coil-based systems are impractical.
1 January 2026 in Journal of Microelectromechanical Systems