9 June 2011 in IEEE Transactions on Circuits and Systems I: Regular Papers
A two-stage fully differential CMOS amplifier comprising inverters as input structures and employing self-biasing techniques is presented. The proposed amplifier benefits from an optimum compensation through time-domain optimization which permits achieving high energy efficiency. Moreover, it achieves the highest efficiency of its class and although it relies on a quasi-class-A topology, it is comparable to class-AB amplifiers. Detailed circuit analyses such as differential-mode, common-mode feedback, noise, slew rate, and input/output range are carried out. Based on these analyses, a manual design methodology and a genetic algorithm based optimization are presented. Finally, the most relevant experimental results for an integrated circuit prototype designed in a 0.13 μm 1.2 V standard CMOS technology are shown.
12 August 2016 in IEEE Transactions on Education
The two projects presented in this paper can be used either as two separate assignments in two different semesters or as a final assignment for undergraduate students of electrical engineering. They have two main objectives: first, to teach basic electronic circuit design concepts and, second, to motivate the students to learn more about analog circuit design. The two projects are: 1) the design of an audio power amplifier, and 2) the design of an amplitude-modulated optical link with a pulsed light-emitting diode (LED) at the emitter and a photodiode and a transimpedance amplifier at the receiver. An audio signal is used to modulate the oscillator that drives the LED, and the receiver demodulates this signal to produce an audio signal (music, for example) that can be sent to a loudspeaker. The intent of this optical communication system was to allow students to design and build various electronic circuits that have an overall objective and a clear practical application. Students are motivated by using this system to transmit, receive, and listen to their own music.
19 August 2024 in IEEE Access
This paper proposes new techniques for automatic simulation-based analog circuit synthesis using genetic algorithms. This is intended to contribute to the set of electronic design automation tools that use genetic algorithms in circuit synthesis, especially those that use the simulator-in-the-loop paradigm. In this study, a genetic algorithm was employed as the generation engine for analog circuits, and variable-length chromosomes were used to describe circuit topology. The entire process is carried out on a flat level (device level), i.e. using the transistor and other elementary devices (e.g. resistors) as the basic elementary blocks. Circuit synthesis is accomplished without any knowledge of previously defined topologies (or analog block cells). Three techniques are presented for analog circuit synthesis that are incorporated in the genetic algorithm, which contribute to its robustness, leading to better and faster results. These techniques can be summarized as follows: 1) adaptive probability of chromosome acceptance, 2) removal of redundant or useless components, and 3) segmented evolution. The automatic process starts with the circuit input and output specifications and proceeds with the evolution of both circuit topology and component sizing. The results shown in this paper include a 40 dB DC amplifier, which, when evaluated by CADENCE 6.0, using UMC 130 nm technology, with a load capacitor of 10pF, has a gain of 102V/V, a GBW product of 70 MHz, and a figure of merit of 1436 MHz.pF/mW.