1 January 2024 in Applied Physics Letters
The film bulk acoustic wave resonator (FBAR) is one of the most popular devices in the radio frequency field. Numerous researchers are simultaneously working to develop an effective electromechanical coupling coefficient (keff2) tuning technology, aiming to meet the diverse bandwidth requirements of the 5 G era. Based on a traditional FBAR process, this work prepares several different devices and then analyzes the four factors that influence keff2 from the perspective of process, material, and design. The pillar structure achieves the largest keff2 tuning range of 2.84% (33 MHz). The composite piezoelectric film can tune the overall resonant frequency in a wide range, and its keff2 tuning range is 1.75% (12.5 MHz). The area effect tunes the fs in a small range, ultimately achieving a keff2 tuning range of 1.16% (11 MHz). Film stress regulation achieves keff2 tuning range of 2.73% (30 MHz), but it has the greatest difficulty. The integration of various keff2 tunable methods has important guiding significance for the design of FBAR filters in the future.
10 July 2024 in Journal of Applied Physics
The lithographically tunable and small size features of Lamb wave resonators (LWRs) take a bright future for their use in high frequency narrow band filters. Resonant frequency drift due to temperature variation has a large impact on the narrower passband and a temperature coefficient of frequency (TCF) closer to 0 can broaden the stable temperature range of the resonator. This paper proposes a method of etching grooves in the area of the piezoelectric layer not covered by the Interdigital transducer (IDT) electrodes to improve the temperature stability of the Lamb resonator. Through the finite element method and theoretical analysis, the phase velocity, group velocity, and TCF dispersion curve of different modes of the resonator with groove structure were determined. The reason for the change of TCF under different normalized thicknesses of AlN was explained through the conversion of the LWR from a contour mode resonator (CMR) to a Cross-Sectional Lamé Mode Resonator. Simulation and test have shown that etching grooves have the effect of reducing TCF by adjusting the electromechanical coupling coefficient. The test shows that 205 nm-depth grooves can lower the TCF of the S0 mode IDT-Open LWR from −13.3 to −5.1 ppm/°C and S1 mode from −36.8 to −9.0 ppm/°C, respectively. The TCF of S0 and S1 mode LWRs decreased by 61.7% and 75.5%, respectively, after 205 nm groove etching. The groove etching method greatly raises the temperature stability of the LWR, enabling Lamb wave filters to operate stably over a wider temperature range.
16 February 2022 in Journal of Advanced Transportation
Rotary kiln is a large-scale instrument for industrial firing of cement. Due to its thermal insulation characteristics, this article studies the application of rotary kiln in supply chain logistics transportation. The main research focus of this paper is the thermal simulation model of rotary kiln and intelligent supply chain logistics transportation monitoring management. This paper analyzes the rotary kiln and its parameters and then designs a thermal simulation model of the rotary kiln. Then this article also combines the relationship between logistics and supply chain, studies the characteristics of supply chain, summarizes and designs a new type of smart supply chain logistics transportation method, and then applies the rotary kiln thermal simulation model to this new type of transportation method. In order to optimize its transportation efficiency and thermal insulation degree, this paper designs the supply chain optimization experiment and the rotary kiln simulation thermal numerical optimization experiment. This article also carries out the overall efficiency analysis of logistics based on DEA and analyzes the results of the experiment and applies it to the intelligent supply chain logistics transportation method of the thermal simulation model of the rotary kiln and compares this new type of transportation method with the traditional transportation method. The experimental results show that the intelligent supply chain transportation method based on the thermal simulation model of the rotary kiln improves the insulation effect by 59 compared with the traditional transportation method. Compared with the traditional transportation method, the transportation efficiency of the smart supply chain transportation method based on the thermal simulation model of the rotary kiln has increased by 48.
9 June 2025 in Applied Physics Letters
The Lamb wave filter (LWF) has a moderate bandwidth, and the conventional temperature compensation method with one layer of SiO2 on the Lamb wave resonator (LWR) will significantly reduce its effective electromechanical coupling coefficient. This, in turn, narrows the bandwidth of the LWF and limits its application range. This paper achieves high temperature stability for both the LWR and LWF by employing a strategy that combines a double-layer SiO2 and a groove structure based on a Sc0.2Al0.8N film. Finite element analysis is employed to investigate the effect of adding single or double layers of SiO2 films on the temperature stability of the Sc0.2Al0.8N LWR. The simulation results show that applying SiO2 to both the top and bottom of the Sc0.2Al0.8N film can mitigate the reduction in k2 while enhancing temperature stability. The groove structure in the piezoelectric layer can simultaneously improve the temperature coefficient of frequency (TCF) and k2 by altering the electric field distribution and boundary conditions. Measurement results show that the double-layer SiO2 improves the TCF of the LWR to approximately –10 ppm/°C. The grooves can further improve the TCF toward 0 ppm/°C and increase the k2 of LWR.