The thin film bulk acoustic resonator (FBAR) has emerged as a promising choice for liquid sensors because of its high frequency and sensitivity. To investigate the potential of FBAR devices working as the liquid sensors, we study the operating law of FBAR in liquid environments and explore the different loading effects of liquid on the shear mode and longitudinal mode. By analyzing the device and liquid interactions, we modify the Mason model of FBAR in the liquid environment. Subsequently, the influence of the piezoelectric film with different tilt angles and liquids on the characteristics of FBAR is discussed. We also prepared Sc0.2Al0.8N film-based FBAR to confirm the influence of different liquid environments on the resonant performances. The results show that the frequency drift of FBAR in the shear mode is related to density and viscosity of liquid, and the frequency drift of FBAR in the longitudinal mode is related to bulk modulus and density of liquid. The resonant frequency of FBAR in the shear mode is more sensitive with glycerol solution than that of FBAR in the longitudinal mode. This work can provide a research basis for the application of FBAR liquid sensors.
With the emergence of fifth-generation communication systems, filters with bandwidth (BW) >5% and center frequency >4 GHz are in urgent need. This work presents film bulk acoustic resonators (FBARs) and bulk acoustic wave (BAW) filters based on Al0.8Sc0.2N films. To obtain a better quality AlScN film, we deposited AlScN by physical vaper deposition method on metal-organic chemical vapor deposition developed AlN seed, which was deposited directly on a Si (111) substrate. Using film transfer technology combined with adopting different FBAR structures, filter topology circuits, and external circuits, a BAW filter with a minimum insertion loss of 1.819 dB, a center frequency of 5.56 GHz, a −3 dB BW of 599 MHz, and an out-of-band suppression of at least 35 dB is fabricated and presented in this work.
The Lamb wave filter (LWF) has a moderate bandwidth, and the conventional temperature compensation method with one layer of SiO2 on the Lamb wave resonator (LWR) will significantly reduce its effective electromechanical coupling coefficient. This, in turn, narrows the bandwidth of the LWF and limits its application range. This paper achieves high temperature stability for both the LWR and LWF by employing a strategy that combines a double-layer SiO2 and a groove structure based on a Sc0.2Al0.8N film. Finite element analysis is employed to investigate the effect of adding single or double layers of SiO2 films on the temperature stability of the Sc0.2Al0.8N LWR. The simulation results show that applying SiO2 to both the top and bottom of the Sc0.2Al0.8N film can mitigate the reduction in k2 while enhancing temperature stability. The groove structure in the piezoelectric layer can simultaneously improve the temperature coefficient of frequency (TCF) and k2 by altering the electric field distribution and boundary conditions. Measurement results show that the double-layer SiO2 improves the TCF of the LWR to approximately –10 ppm/°C. The grooves can further improve the TCF toward 0 ppm/°C and increase the k2 of LWR.