Jie Zhou

Jie Zhou

Auto-generated profile, based on publicly available information

Jie Zhou

The Institute of Technological Sciences, Hubei Key Laboratory of Electronic Manufacturing and Packaging Integration, Wuhan University 1 , Wuhan 430072

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 August 2022 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
QXQinwen Xu
Qinwen Xu
JZJie Zhou
Jie Zhou
YLYan Liu
Yan Liu
YZYang Zou
Yang Zou
WLWenjuan Liu
Wenjuan Liu
CSChengliang Sun
Chengliang Sun
High-performance Lamb wave devices have a vast application prospect in modern wireless communication systems. This paper proposes a method of spurious mode suppression by reducing the overlap length of electrodes according to modal shapes. The AlN/Al0.8Sc0.2N composite film is used to achieve a trade-off between electromechanical coupling coefficient (kt2) and Q factor. The finite-element analysis (FEA) is employed to study the performance of the lowest-order symmetric mode (S0) Lamb wave resonators (LWRs), and the FEA result shows a spurious mode in the impedance response. According to the results of modal shape analysis, the typical LWR, the LWR with the circle-shaped arrangement of electrodes, the LWR with the circle-shaped apodization, and the LWR with the arc-shaped apodization are fabricated to suppress the spurious mode and investigate the performance of the LWRs. The measurement results show that the spurious mode is effectively suppressed over a wide frequency range (1.9–2.2 GHz) by the three designed electrode configurations. The LWR with the circle-shaped apodization working at 2.023 GHz has a Qp factor of 955, a moderate kt2 of 2.97%, a figure-of-merit (Q×kt2 ) of 28.4, and a large value of f×Q×kt2 (5.773 × 1010). Utilizing modal shapes to design the electrode configuration of LWRs can suppress spurious modes without significant performance deterioration.

19 February 2020 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
JZJie Zhou
Jie Zhou
JLJieyu Liu
Jieyu Liu
YZYang Zou
Yang Zou
YCYao Cai
Yao Cai
YZYi Zhang
Yi Zhang
CSChengliang Sun
Chengliang Sun
This paper presents a modified Lamé-mode resonator (MLMR) with a high, effective electromechanical coupling coefficient ( K e f f 2 ) . With trapezoidal grooves introduced by etching the superficial piezoelectric material between interdigitated electrodes (IDTs), the MLMR can remarkably improve K e f f 2 , eliminate spurious modes, and reduce the internal stress of piezoelectric material. The Lamé mode resonator (LMR) with four different electrode configurations is investigated by using finite element method simulation first; then, the impact of the groove's vertical ( h ) and horizontal ( θ ) size on K e f f 2 and spurious modes of MLMRs is theoretically analyzed and optimized. It is noted that all the modified structures can improve K e f f 2 except the IDT-Ground structure. This work demonstrates a simulated K e f f 2 as high as 10.47% in the modified IDT-Floating structure, and 10.73% in the modified IDT-IDT structure, which is the highest ever reported in S0 mode AlN LMR. The MLMR shows great prospect for fabricating broad bandwidth filters.

25 March 2024 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
QXQinwen Xu
Qinwen Xu
YZYang Zou
Yang Zou
CGChao Gao
Chao Gao
XCXiang Chen
Xiang Chen
JZJie Zhou
Jie Zhou
CSChengliang Sun
Chengliang Sun
Lamb wave resonators (LWRs) exhibiting high-quality factors and clean spectra demonstrate promising applications in RF communication and sensing. This paper discusses the relationship between the spurious mode, the quality factor, and the effective electromechanical coupling factor of resonators. When the resonant frequency of the spurious mode is slightly below the parallel resonant frequency (fp), the quality factor at fp (Qp) decreases dramatically. To enhance Qp and suppress the spurious mode, the LWRs with busbars including only the top electrode (non-overlap busbars) and the LWRs with busbars incorporating both top and bottom electrodes (overlap busbars) are designed and fabricated. The LWR with 12 μm-wide overlap busbars exhibits a notable enhancement in Qp, elevating it from 553.76 to 1488.17 and suppresses the spurious mode simultaneously. This research introduces a promising approach to suppress the spurious mode and enhance the quality factor of Lamb wave resonators, thereby holding great potential for applications in sensors and mobile communication.

10 July 2024 in Journal of Applied Physics
Verified
Journal Article
Open access
PDF file
HLHaiyang Li
Haiyang Li
JZJie Zhou
Jie Zhou
QXQinwen Xu
Qinwen Xu
ZLZesheng Liu
Zesheng Liu
YRYuqi Ren
Yuqi Ren
CSChengliang Sun
Chengliang Sun
The lithographically tunable and small size features of Lamb wave resonators (LWRs) take a bright future for their use in high frequency narrow band filters. Resonant frequency drift due to temperature variation has a large impact on the narrower passband and a temperature coefficient of frequency (TCF) closer to 0 can broaden the stable temperature range of the resonator. This paper proposes a method of etching grooves in the area of the piezoelectric layer not covered by the Interdigital transducer (IDT) electrodes to improve the temperature stability of the Lamb resonator. Through the finite element method and theoretical analysis, the phase velocity, group velocity, and TCF dispersion curve of different modes of the resonator with groove structure were determined. The reason for the change of TCF under different normalized thicknesses of AlN was explained through the conversion of the LWR from a contour mode resonator (CMR) to a Cross-Sectional Lamé Mode Resonator. Simulation and test have shown that etching grooves have the effect of reducing TCF by adjusting the electromechanical coupling coefficient. The test shows that 205 nm-depth grooves can lower the TCF of the S0 mode IDT-Open LWR from −13.3 to −5.1 ppm/°C and S1 mode from −36.8 to −9.0 ppm/°C, respectively. The TCF of S0 and S1 mode LWRs decreased by 61.7% and 75.5%, respectively, after 205 nm groove etching. The groove etching method greatly raises the temperature stability of the LWR, enabling Lamb wave filters to operate stably over a wider temperature range.

9 June 2025 in Applied Physics Letters
Verified
Journal Article
Closed access
HLHaiyang Li
Haiyang Li
QXQinwen Xu
Qinwen Xu
BLBinghui Lin
Binghui Lin
XCXiang Chen
Xiang Chen
JZJie Zhou
Jie Zhou
CSChengliang Sun
Chengliang Sun
The Lamb wave filter (LWF) has a moderate bandwidth, and the conventional temperature compensation method with one layer of SiO2 on the Lamb wave resonator (LWR) will significantly reduce its effective electromechanical coupling coefficient. This, in turn, narrows the bandwidth of the LWF and limits its application range. This paper achieves high temperature stability for both the LWR and LWF by employing a strategy that combines a double-layer SiO2 and a groove structure based on a Sc0.2Al0.8N film. Finite element analysis is employed to investigate the effect of adding single or double layers of SiO2 films on the temperature stability of the Sc0.2Al0.8N LWR. The simulation results show that applying SiO2 to both the top and bottom of the Sc0.2Al0.8N film can mitigate the reduction in k2 while enhancing temperature stability. The groove structure in the piezoelectric layer can simultaneously improve the temperature coefficient of frequency (TCF) and k2 by altering the electric field distribution and boundary conditions. Measurement results show that the double-layer SiO2 improves the TCF of the LWR to approximately –10 ppm/°C. The grooves can further improve the TCF toward 0 ppm/°C and increase the k2 of LWR.