Negative d-axis current injection used in interior permanent magnet synchronous machines (PMSMs) weakens the permanent magnets' (PM) flux, eventually increasing the PMs losses and reduces therefore the machine efficiency. Several studies have reported the increase in the airgap flux harmonic content as the primary reason for the PM losses increase in flux weakening operation, disregarding PM properties variation with the magnetization state (MS) due to PM magnetoresistive effect. This paper analyzes the variation of PM losses with the MS and flux weakening current, the target being threefold: a better understanding of PM losses production mechanisms; to analyze the impact of MS on the thermal behavior of the machine; use this knowledge to improve the machine design
A wide variety of tumors, both benign and malignant, occur in the parapharyngeal space. Depending on histology and extent, treatment may include surgery and/or radiotherapy (RT). Herein we discuss the role of RT in the management of some of the more commonly encountered neoplasms, including salivary gland tumors, paragangliomas, schwannomas, and soft-tissue sarcomas.
30 January 2020 in IEEE Transactions on Industry Applications
Permanent magnet synchronous machines (PMSMs) operation above base speed is typically achieved by injecting negative d-axis current to produce flux weakening. However, this mode of operation increases copper, stator/rotor core and permanent magnet (PM) losses, penalizing the efficiency and increasing the risk of demagnetization. Variable Flux PMSMs (VF-PMSM) in which PMs are magnetized/demagnetized during normal operation of the machine have been proposed to avoid the use of flux weakening current. However, PM aging due to magnetization/demagnetization cycles has not thoroughly studied yet. This paper analyzes the variation of NdFeB, SmCo and AlNiCo PMs properties, including magnetic, electric and thermal, resulting from magnetization/demagnetization cycles.
15 May 2018 in IEEE Transactions on Industry Applications
Torque production capability of permanent magnet synchronous machines (PMSMs) depends on the permanent magnets (PM) magnetization state (MS). MS is a function of PM initial magnetization level, which decreases as temperature increases. Furthermore, excessive PM temperature can produce irreversible PM demagnetization. PM MS and temperature measurement/estimation is therefore important both for torque control and monitoring purposes as well. The injection of a high frequency (HF) signal in the stator windings has been shown to be a viable option for temperature and MS estimation. This technique estimates the PM temperature or/and MS from the variation of the stator reflected PM HF resistance. However, since PM HF resistance is affected by both PM temperature and MS due to magnetoresistive effect, separating both effects is not trivial. This paper studies the effect of magnetoresistance and temperature on the PM resistivity, the target being twofold: to understand how temperature and MS estimation methods interfere with each other, and to further use of this knowledge for the development of methods able to estimate the magnet temperature and MS simultaneously.