7 February 2024 in IEEE Transactions on Applied Superconductivity
In this paper, a curved dipole magnet with Discrete-Cosine-Theta (DCT) coils which have compact ends and higher excitation efficiency, used for carbon ion therapy treatment facility is discussed. The dipole magnet has a bending angle of 90 degrees and a bending radius of 0.8 m. The magnet is ramped from 0 T to 2.9 T with a maximum rate of 1 T/s. However, the ramping magnetic field induces eddy current loss in metallic structure and ac loss in superconductor, resulting in temperature rise, and even quenching of the magnet. Therefore, a deep understanding of these effects is crucial for the design process. To mitigate the overall coil loss, reasonable structural design and conductor specifications are implemented. Furthermore, through finite-element analysis, the temperature distribution of the magnet under different cooling methods, such as LHe (Liquid Helium) bath and thermal conduction, are calculated in detail. Multiple reasonable cooling structures are also designed to ensure the safety of the magnet.
11 June 2025 in IEEE Transactions on Applied Superconductivity
CLAPA-II is a laser-driven proton therapy facility designed and constructed by Peking University. Protons are generated through laser–plasma interaction, with a 2-PW laser used to accelerate the proton beam. The beam transport system is capable of transmitting protons with energies ranging from 40 to 230 MeV. The CLAPA-II beamline consists of both a horizontal transport line and a vertical beamline. To provide critical technical validation for the future engineering of superconducting rotating frames, the vertical beamline utilizes curved discrete–cosine–theta magnets, resulting in a lighter and more compact design. The vertical beamline is composed of six modular magnetic units, each containing a 2.77-T central magnetic field dipole magnet with a 900-mm bending radius, alongside two 40-T/m gradient quadrupole magnets in a quadrupole–dipole–quadrupole (Q-D-Q) configuration. This article details the electromagnetic optimization design of the vertical beamline superconducting magnet (Q-D-Q) system. In response to the beam physics requirements, magnetic fields were optimized for both pure coil and iron core models. Structural behavior under 4.2-K excitation was analyzed, and the induced magnetic field distortions due to mechanical deformation were quantitatively evaluated. In addition, excitation testing and magnetic field measurements were conducted on the first magnet in a liquid helium environment. The findings provide key technical support for the design and manufacturing of superconducting magnet systems for future laser-driven proton therapy accelerators, while also establishing the technical foundation for large-scale production.
20 December 2023 in IEEE Transactions on Applied Superconductivity
Fe-based nanocrystalline materials is a typical soft-magnetic material with advantages such as high saturated magnetic flux, high resistivity and low magnetostriction coefficient. By utilizing a specialized winding process, the ultra-thin strip has been successfully applied for use in scanning magnetic cores. For static field, the simulated and tested integral magnetic field uniformity is consistent, and tested effective length is slightly shorter than simulated one. The static magnetic field can meet the needs of scanning magnets. For transient field, the new iron core has less magnetic field delay and distortion compared to silicon steel sheet iron. The simulated maximum magnetic field delay is reduced from 161 Gauss to 16 Gauss. The maximum magnetic field delay of silicon steel sheet iron under test is 87 Gauss, and the corresponding data of the new iron core is almost 0 Gauss. With the weakening of the magnetic field delay, the magnetic field distortion should also be suppressed. With the novel iron core, the magnetic field of the scanning magnet can be improved, thereby reducing the distance from the scanning magnet to the terminal. Rotating gantry is the focus of current research on proton and heavy ion therapy accelerator facilities. This novel iron core can facilitate a decrease in the rotating diameter and weight of the gantry, while enhancing the scanning accuracy. Moreover, the novel iron core can be exploited in scenarios where ferrite cores are “excess capacity”, but traditional silicon steel cores are “insufficient capacity”, such as for certain bump magnets used in synchrotrons.
19 April 2022 in IEEE Transactions on Applied Superconductivity
AbstractTo cool the superconducting magnets of a compact synchrotron, a forced flow cooling system with cooling capacity of 10.16 watts at 4.5 K based on GM/J-T concept is designed. As a preliminary research of the cooling system, a research device is built. The research device shares a similar flow diagram with the cooling system, but the GM cryocooler is replaced by a cold helium pre-cooling section to searching the system parameters and improve the system response speed. For the research device, the pre-cooling section consumes 0.332 g/s of liquid helium and generates 0.565 g/s of liquid helium after throttling by the J-T valve. To elucidate the performance of the heat exchangers based on enthalpy balance, the cycle point parameters are picked. The results of the thermomechanical analysis show that the temperature, the temperature difference and the pressure of helium at inlet of the JTH section how to affect the cooling capacity of the system. The heat leakage analysis, the design parameters optimization and the cycle efficiency improvement in the system are also discussed in this paper. Index TermsHelium refrigerator, Cryogenic system, Cooling capacity, Thermodynamic analysis
29 October 2026 in IEEE Transactions on Applied Superconductivity
27 January 2022 in IEEE Transactions on Applied Superconductivity
The electron cooling technology is applied in the spectrometer ring (SRing) to improve the luminosity of ion beam for the High Intensity heavy-ion Accelerator Facility (HIAF). The electron cooler consists of a gun section, two 90-degree toroids, a cooling section and a collector section. There are four kinds of main coils used to provide longitudinal magnetic fields along the path of the electron beam. In this paper, we present the modeling and analyzing of the electron cooler magnets by three-dimension software. The optimizing of the magnetic field of cooling section is completed to achieve the required effective cooling length. The magnetic fields along the electron beam path and ion beam path are calculated and the beam trajectory of typical ion is also simulated to offer data for correcting the orbit.